8 ports switch 6 X Gbit RJ45 + 2 Gbit SFP - Unmanaged, 12-56VDC

24 x 100 / 1000Mbit BASE-X SFP slots
4 x 10/100 / 1000Mbit RJ45 shared with Port-1 to Port 4
4 x 10Gbit BASE-SR / LR SFP + slots SFP
IP stacking up to 6 devices
Gigabit TP SFP and 10G SFP + interfaces
Hardware stacking up to 6 units
Switch series stacked in a logical unit
stacking architecture supports redundant Ring mode 
IPv4 IGMP / IPv6 MLD snooping v1, v2 and v3
MVR (Multicast VLAN registration)
Ethernet Ring Protection Switching
Supply voltage: 100 - 240VAC and 36 - 72VDC 2.5A
Dimensions: 440 x 280 x 44 mm (1U)
Operating temperature: 0 - + 50 ° C
DIN bracket

IP67 and IK10 Gbit PoE splitter for outdoor mounting
PoE++ (60W) Splitter with 12V / 5A out to non-PoE equipment
1 x RJ45 port for Poe ++ in from Switch or PoE injector
1 x RJ45 port (data) for non-PoE equipment
1 x Phoenix connector with 12VDC / 5A out for equipment
PoE Standard: IEEE 802.3AT / BT (PoE++)
IEEE 802.3at (PoE+ Mid-Span)
IEEE 802-3BT (PoE++ Poh HDbaset)
Pin: (- 1,2,7,8) (+ 3,6,4,5)
Operating temperature: -40 - +75°C
Wall bracket
Size: 170 x 73 x 44 mm
Weight: 425g

Converts the AUI port to the fiber cable connection.
Only intended for mounting directly on the network card or HUB
part for isolating the PC from the network or against the frame potential; differences between different supply networks
Max. cable lengths: AUI 50 meters, fiber optic 2000 meters
Power supplied from the AUI port that delivers 10 - 15 VDC / 200 mA
Plugs: DB15 male connector for AUI port and ST connector for fiber optic cable

External COM port via Ethernet and Internet
RS422 / 485 Serial port via screw terminal
Power supplied from POE or 12 - 48VDC
Your mounting