Converter / Amplifier / Insulator

USB-32COM-RM - 32-Port RS-232 USB-to-Serial Adapter, Metal Case, Rack-Mountable.

• High speed
• 128 byte transmit FIFO & 384 byte receive FIFO
• Serial port protected with surge protection of 10KV
• Built-in switching power supply of 100V~240V
• Standard 19-inch, 1U rackmount chassis

PROFIBUS TO HART Convert, Gateway
4 x HART Canals
Max. 2 pcs. HART Masters
Point-to-Point or Multi-Drop HART Mode
Possibility of connecting 15 HART modules
PWR / RUN / ERR indication LED
Built-in Watchdog
4 kV ESD Protection
Operating temperature -25-75 ℃
for DIN rail mounting

Gateway from Ethernet slave to PROFIBUS master
protocol / hierarchy: DP-V0 Slave
PROFIBUS Speed ​​(Kbps) in 10 step from 9.6 - 12000
speed setting is automatic
Max. Input data length: 240 byte
Max. Output data length: 240 bytes
Address setting: 0 ~ 126 Set by DIP switch or EEPROM
Ethernet protocol: TCP / UDP server / client
Configuration: Web Configuration

MODBUS RTU (RS232 / 422/485) equipment for Profibus DP network

MODBUS RTU slave devices are connected to the Profibus DP network

Adds eight high-speed RS-232/422/485 serial ports via USB connection
2k bytes transmitter and receiver
Requires no IRQ, DMA, I/O port
RS-232 max bit rates of up to 1 Mbps
RS-422/485 maximum bit rates of up to 10 Mbps
Automatic transmission buffer control for 2-wire RS-485 half-duplex operation
Biasing and terminating resistors installed on board
Supported RS-232 signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Supported RS-422 signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 4-wire signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 2-wire signals: Data-, Data+, GND
Data Bits: 7/8
Parity: None, Even, Odd, Mark, Space
Stop Bit: 1, 2
Flow Control: Hardware (RTS, CTS), XON/XOFF
Monitor LEDs for TxD, RxD indicating port status
Built-in AC to DC switching power supply, 100VAC to 240VAC
Virtual COM port drivers available for Windows 11, 10, 8.1, 8, 7, Vista, 2003, XP, 2000
Win Server: 2000 up to 2018, Linux, MAC
Industrial quality metal case with DIN bracket for DIN rail mounting

Allows PROFIBUS master access to MODBUS TCP devices
Connect MODBUS devices to a PROFIBUS network
PROFIBUS baud rate from 9.6k to 12M
MODBUS TCP 10/100
Supply voltage: 10 - 30VDC < DIN fitting

Sæt udstyr med RS232, RS422 og RS485 interface på et Profibus system.

Serial to HART Convert
Allows 2 pcs. Hart Masters
Point-to-Point or Multi-Drop Hart Mode
Possibility of connecting 15 HART modules
Point-to-point or multi-drop HART mode
for configuration of modules
Isolated COM 1: RS-232 / 422/485
PWR / RUN / ERR INDICATION LED
Built-in Watchdog
4 kV ESD protection

Supports HART Short / Long Frame
Supports Hart Burst Mode
Supports Point-to-point or Multi-Drop Hart mode
supports connection of up to 15 Hart slave devices
Allow 2 Hart Master
HC_Tool tool for module configuration and HART communication
support firmware update via Ethernet
PWR / TXRX indication LED
4KV ESD protection
built-in watchdog
Selectable 250Ω load resistance < Br> 4 Hart Channels
Support VXCOMM Technology
Built-in Web Server for Network Setting

USB to Hart Bus Converter
to HART Short / Long Frame
to Hart Burst Mode
Point-to-point or Multi-Drop Hart mode
Up to 15 HART slave units < Br> Allow 2 Hart Master
Module Configuration Tools and HART communication
Power supplied by the USB port
Selectable 250Ω load resistance

RS485 & nbsp; recoverable RS232 controller / converter
Link to 3 x RS232 units from 1 x RS485 bus
Baud speed 300 bit/s to 115,200 bit/s
10 V DC to + 30 V DC
Dual watchdog
256 KB SRAM buffer
1 x & nbsp; RS485 address per. serial interface
Operating temperature: -25 ° to + 75 ° C
For DIN rail mounting

USB til 4 ports konverter med DB9 stil til DIN skinne montering.

• Med USB kabel og strømforsyning.
• Metal kabinet.
• 4 X RS422/485 porte
• Hastighed: optil 921.6 Kbpz
• 4 X DB9 hanstik

4-Port RS-232/422/485 USB tilSeriel Adapter, metal kabinet med forlængerkabel. Til DIN skinne montering.

• Plug & Play
• DB37 forlængerkabel til 4 DB9 serielporte
• Metal kabinet.
• 4 X RS232/422/485 porte
• High speed serielport baud rate optil 921.6K bps
• 128 byte transmit FIFO & 384 byte receive FIFO

Industrial RS422/RS485 Serial Converter/Repeater with 2 KV Isolation, MOXA TCC-120i

Boost serial signal to extend transmission distance
Boost RS422 or RS485 signal, or convert RS422 to RS485
2 KV optical isolation protection
15 KV serial ESD protection

Wall or DIN-rail mounting

Terminal block for easy wiring

Power input from terminal block
DIP switch setting for built-in terminator (120 ohms)

Optoisolerede RS232 til RS422/485 konverter
3000Vdc isolation
24Vdc, 1.2W
RS-232 (DB9)
RS485 (2-Wire) eller RS422 (4-Wire)
Speed (bps): 1.200, 2.400, 4.800, 9.600,
19.2 k, 38.4 k, 57.6 k, 115.2 k
RTS control and RS-422 (switchable)

MOXA Converter RS232 / RS422 / RS485 Fiber MultiMode, TCF-142-M-ST

Isoleret RS485 repeater til DIN skinne

MOXA USB til RS232/422/485 konverter, isoleret.

• Port powered USB to RS232 / RS485 / RS422 converter
• Optically isolated up to 2KV
• High performance and reliability MOXA brand
• 15N high retention USB type B connector
• Texas Instruments processor chip
• Supports 2-wire and 4-wire RS485
• Indication LED lights for all handshake lines
• WHQL compliant COM drivers included
• Auto detection of data speed
• Automatic Data Direction Control
• Built-in 15 KV ESD electrostatic protection
• DB9 terminal header block included
• USB cable included

Point-to-Point Fiber Converter RS232 / RS422 / RS485
Multi Mode 62.5 / 125 or 50 // 125my, wavelength 850nm
Power Supplied from 10 - 30VDC / 2 Watts
DIN Rail Bracket .
Up to 2km
ST plug

RS232 for USB printer adapter cable
connect USB printer to PC com port
automatic baud rate 
power supply included
DB9 female and USB B
Supply voltage: 5VDC 100mA
GDI printers (without own emulation) are not supported 
See list of supported printers under Downloads

Extend the distance between PC and RS232 Equipment
Straight through network cable
RS232 serial port boost up to 1.2 km
Baud rate range: 300 - 200kbps
Supply voltage: DC9-24V (not included )
Optical isolation
isolation voltage: 2500Vrms pulse or 500 V = continuous
Dimensions: 100 mm x 50 mm x 20 mm
Weight: 350 g

RS232 lysleder omformer m/DCE eller DTE omskifter

MOXA USB to RS422/485 converter
Galvanically isolated.
1-port RS-422/485 USB-to-serial converter
Compatible with USB 2.0
12 Mbps USB data rate
921.6 kbps maximum baud rate for super fast data transmission
Drivers provided for Windows, Windows Server, WinCE, and Linux
Mini DB9 female to terminal block adapter for easy wiring
LEDs for indicating USB and TxD/RxD activity
15 kV ESD protection for all serial ports
2 kV electrical isolation
Supports Windows 11

Få en COM-port på PC via USB porten

MOXA USB to RS232/422/485 converter.
Kompatibel med USB 2.0
Software selectable RS232, RS422, 4-wire RS485 and 2-wire RS485
Certified drivers for Windows, WinCE 5.0 and Linux
15 KV ESD protection

Supporting Win10

Get a RS485 / RS422 port on the PC via the USB port
Software for choosing a fixed COM port - very useful
Compatible with USB 2.0
12 Mbps USB data rate
921.6 kbps maximum baud rate
Driver for Windows, WinCE, and Linux
Mini DB9 male for terminal block adapter
LED for indication of USB and TxD / RxD activity
15 kV ESD protection for 2 kV optical isolation