1D Laser Bar Code Reader IP67 with stand. USB, 3mil.
1D Laser stregkodescanner
IP 67 tæt
USB tilslutning
-20-45 °C
Læseafstand10-500mm
Subcategories
1D Laser stregkodescanner
IP 67 tæt
USB tilslutning
-20-45 °C
Læseafstand10-500mm
Honeywell 1902GER-2 Barcode Scanner
KUN stregkodelæser, uden ladestation
1800 mAh Li-ion minimum batteri
Op til 50,000 scanninger pr. Opladning
Trådløs
1D barcode
2D QR code scanner
Stationary for clamping
Supplied with 2 pcs. 3mm threaded socket
1.5 meter USB cable
Push button to scan
Red line and light
Automatic trigger mode
Constant scanning
Reads 1D and 2D barcodes
quick decoding (4mil)
Support for dark Environmental scanning
interface: USB
depth of field: 20mm-700mm
RS485 Command Controllet Ready / Read
Set to Read. Called to Transfer Take UID Code
10 digit Hex - (26 digits for PC)
2-wire RS485 Half-duplex.
125 kHz EM format.
12vdc 0.2a (MDFollows not)
Dimensions: 113.5 x 45.6 mm (L X B)
10/100M Ethernet interface
TCP Server, UDP, DHCP
Til 125Khz ID Kort
Forsyning: 5V DC PSU max 300MA
1D barcode scanner with RS232
for stationary mounting
very compact
5vdc
Scan Mode: Continuous or by command
Up to 360 scans per second
Dim: 50 x 18 x 37 mm
Weight: 65g with cable
Cable length: 1.8m
RFID 13.56MHz Mifare reader
Looks like a USB stick
ISO14443A standard
5VDC/100mA from USB port
USB 1.1
UID code as 40 bit HEX. HID to USB port
40 bit UID
Reads the same code once on presentation
Automatic CR and line change
Reading distance up to 2 cm
LED tri-color
Dimensions: 70mm x 20mm x 9.8mm
Weight: 18g
Reading speed: less than 100ms
Can read maps where the magnetic strip turned toward or away from the user
HID - keyboard wedge
Kan læse kort hvor magnetstriben vendes mod eller væk fra brugeren
Network RFID reader
10 / 100Mbit Ethernet interface
Supports MDI / MDIX
1 x RJ45 and 1 x DC connector
TCP Server, UDP, DHCP
for 13.56MHz Mifare card
Supply: 5V DC PSU Max 300mA
RFID Mifare reader
13.56MHz, Mifare, Felica, Desfire, Ultralight, Felic
Reading distance up to 3 cm
RS232 or Wiegand 26 Interface
for wall mounting
LED and Buzzer
Supply voltage: 5 - 18VDC
cable from back
Target: 78 x 43 x 15 mm
Trådløs 2D QR 1D stregkodescanner
Til alle gængse Symbologies
Base med USB
Bluetooth op til 30 meter
2.4GHz RF op til 100m
Kontinuerlig arbejdstid op til 60 timer
Hukommelse: 20.000 koder
Strømforsyning: 5VDC (via USB kabel)
Dimensioner: 152 x 66 x 95 mm (L x B x H)
Vægt: 230g
Temperatur: 0℃ ~ 50℃
RFID EM-Marin and QR code reader
125kHz EM4100/4200
Reading as facing right
Built-in buzzer for sound notification
Can read multiple formats
With CPU watchdog
Power supply: 12V DC
Wiegand 26/34 bits
Dimensions: 125 x 83 x 30 mm
RFID with QR code reader
125kHz EM400x
13,56MHz Mifare Ultralight
Built-in buzzer for audio notification
can read multiple formats
With CPU watchdog
Power supply: 12V DC
Output: RS232, RS485, Wiegand 26/34 bits
Active RFID Tag as bracelet with light sensor, anti-tamper
2.45 GHz read and write
Dimensions: 44W x 30H x 11D (mm)
weight: 23.4g
wireless programming
Digital RSSI/LQI Data
low battery warning
Supplied without 1 x 2032 battery
Built-in button
FCC, CE Certified
MCR-BARCCD-K kan læse både magnetkort (spor 1 og 2) og stregkoder.
Wired 2D Handheld CMOS Barcode Scanner
for Versatile Use
1D Standard and 2D
PDF417, QR Code, Datamatrix
USB Cable Connection
Hands Free Scanning
Operating Temp. -20 ℃ ~ 60 ℃, IP42 close
Waterproof RFID reader
only with Wiegand Interface
Connect to access controls with Wiegand
TAG Type: EM / Mifare
Reading distance: 5.8 cm
IP68
Frequency: 125kHz / 13,56MHz
LED and Buzzer
Cable out from the back
Detachable Backpiece
Supply Voltage: 12VDC
Dimensions: 86 x 86 x 22mm
stationary fitted barcode scanner
can read Health Card App From Mobile
1D and 2D - CMOS
Read 1D Barcodes
Read 2D Codes QR
Codes from Smartphone Screen
Black Cabinet , IP50
USB - Can be selected as HID Keyboard
USB - Can be selected as Virtual COM
USB - Can be selected as IBM Surepos
Automatic Scan Detection
Many Setups
Very Fast Reading - Up to 2.5 meters per second.
fortress holes in the bottom of foot
Bluetooth RFID reader with WiFi incl. Holder and battery
Demo model!
Frequency: 13.56 MHz
Can easily be programmed for other formats
programmable HID or COM port
Can program sectors in TAG
RF Protocol: ISO14443A, MIFARE
Built-in antenna
supply: USB 5V / 200mA
Operating temp. -20 to + 70 ° C
Play
Plug Dimensions: 105 x 72 x 16 mm |
Magnetic card 1/2/3 Tracks reader
RFID 13.56MHz reader / writer
IC Cards reader / writer
NFC reader
Does not support special characters like æ,å,ø...
Dimensions 160mm x 45mm x 45mm
SDK examples for developing applications
Win10, Win7, Vista, Win2000, XP, Linux
USB HF RFID reader with fingerprint
Available with and without funger pressure scanner
Desktop
USB 2.0 Compatible
Incl. programming software download Up to 2,000 fingerprint
range 0-5 cm Kirke roof type: ISO15693 / ISO14443A (Mifare) / ISO14443B / DESFire / NTAG203
supply: USB 5V / 200mA
Operating temp. -20 to + 70 ° C
Play
Plug Dimensions: 105 x 72 x 16 mm
1D, 2D barcode reader
Wireless 2.4GHz via base station (supplied) or USB-A to USB-B cable (included)
Reading distance: 10mm-700mm
Operating time: Approx. 12 hours
Recharge time: Approx. 6.5 hours via USB or base station
Memory: 512K (over 5000 scans)
Dimensions: Scanner: 175 (L) x 72 (B) x 100 (H), Base: 200 (L) x 90 (B) x 51 (H) mm
Weight: 210g (Scanner), 230g (Base)
Quick installation (no screws needed)
Can read QR and Barcode from phone screen!
Supports most 1D and 2D formats
USB1.1, HID-KBW, HID-POS, Custom HID
RS232 (option)
High Speed
IP66-tight
90ms read speed
Reading distance: 0 to 11 cm
Buzzer
OS Support: Win XP/7/8/10, Android, Linux, Mac.
Operating temperature -20 to 70 degrees
Dimensions 101.5 x 78.5 x 48 mm (hole cutout 640x480mm)
Print contrast min. 25%
5VDC
Active RFID Tag as bracelet with 2 x temperature sensor
with light sensor
2.45 GHz Read and write
Dimensions: 44W x 30h x 11d (mm)
Weight: 23.4g
Wireless programming Digital RSSI / LQI data
low battery warning
built-in button
FCC, CE certified
Interface: USB
Reading distance: 0-6 cm
TAG Type: EM4100 and FDX-B
Built-in Antenna
Built-in Buzzer
Supply: USB 5V / 200mA
Drift temp. -20 to +70 ° C
Plug Play
Dimensions: 105 x 72 x 16 mm
Kan printe QR koder
Combatible with EPC Class 1 Gen 2
TAG Type: ISO-18000-6C
Support up to 860MHz (Europe) UHF
Reading distance: Up to 20 cm
Writing distance: Up to 15cm < Br> Built-in antenna
Supply voltage: USB from PC
API Software Developers Included
Built-in LED Buzzer
Operating temperature: -20 to + 65 ° C
Dimensions: 105 x 72 x 16 mm
Brugervenlig bonprinter
2.4GHz RFID reader with up to 200 meters
Omni-directional (SMA)
RS232, 10 / 100M Ethernet interface
Optional: GPRS or WIFI
Optional: 2 channel relay, 2 channel trigger input
Development kit (C ++, C #)
Compatible with active and passive tags
0-100m radius (depends on power output)
can identify 300 tags time-consuming
IP65
DC 5V power supply, 300mW
dimensions: 190mm × 120mm × 40mm without antenna
Dimensions: 320mm × 226mm × 133mm with antenna
Weight: 2 KG
Operating temperature: -40 ℃ ~ + 60 ℃
API interface for fast integration with existing software
Multi 13.56 MHz Mifare Reader
RS232 Connection
5VDC (Power Jack 5.5 / 5.1mm) Not included
Cabinet: ABS, indoor IP65
Dim: 88 x 56 x 18 mm
IP54 Stationary 1D and 2D barcode scanner
very light-sensitive - Good under difficult conditions
with white light
interface: USB
Good for fixed mounting
with laser guide
minimal contrast ratio: 25%
60 Scan per second
Sense Mode, Constant, level mode or pulsation
Dim: 42 x 50 x 24 mm
Weight: 75g
Mini seriesport server for connecting POS units over networks
It may be scanner, printer and the like
2 x RS232
2 x USB 2.0
1 x USB 3.0
1 x RJ45 10 / 100Mbit to Ethernet
Supported by App for iOS and Android
Programmable Software
Supply 5VDC (DC Jack)
IC / RFID / MAGNET motor reader
USB interface
three in one card reader
example. kiosks and the like
Automatic in / out
Supporter NXP Desfire EV1 / EV2 Read / Write
Supporter Desfire Tags
Supporter Auto Read Desfire UID / Block
Reading distance: Up to 5 cm
built-in two-color LED and Buzzer
API Development Shooting Included
Support Decimal, HexideCimal and ASCII ID Formats
Supply Voltage: USB from PC
Unique Serial Number Identification (UID)
Operating temperature: -20 to + 65 ° C
Dimensions: 62.3 x 87.7 x 18.4 mm
Med indbygget touch skærm og bon printer
Long Range 2.45GHz RFID reads and writes for 140 m Range
Programmable parameter
1 x RJ45 (10/100 Mbit)
1 x RS232 (RX, TX)
1 x RS485 2-wire Protocol: ICMP, ARP, IP, TCP (Server / Client), UDP, DHCP, HTTP
Supply voltage: 7 - 15 VDC / 4 Watt
Dimensions: 107W x 138h x 30D (mm)
Weight: 222g
easy installation
RFID-læser til passive RFID-tags, 865MHz til USB med HID
RFID reader for RS232 / RS485 / Wiegand
IP64
Range up to 60cm
Serial communication to / from PC
Relay output (24VDC / 2A) Serial Enabled from PC
Baud Rate : 9600, 8, n, 1
Dim: 210 x 210 x 28 mm
Extended temperature -10 - 60°C
supply: DC 12V, 350mA
Kassebonprinter med auto klipper
Kassebonprinter med auto klipper
Stregkodescanner, desktopmodel, 1650 linie / sek, afkodet, USB
ST STM32 32-bit CPU with 512K Program flash RAM
2M Byte SRAM (1MB lookup table), 4M Bytes Flash RAM (For Font)
1 MB or 35,000 records Seite 128 x 128 dots graphic FSTN LCD display with blue backlight
Dual Color (Red / Green) LED Indicator
RS232 and USB virtual RS232 Seite 120 ~ 80 scans per second
Rechargeable Lithium Battery Pack (1700 mAh / 3.7V)
3.0V, 18mAh, MaxeII ML, Rechargeable Lithium battery for SRAM
Operating hours: Up to 24 hours and 28,000 scans
Certifications: FCC / CE / WEEE / RoHS
Weight: 175g
dimensions: 145 x 64 x 31
Operating Temperature: 0 ° C ~ 45 ° C
OS Support: Windows-based (98 / Me / 2000 / XP / Vista / Win 7 / Win 10)
Reader/Writing Tracks 1, 2 and 3
Standards IBM, ISO, ANSI, DIN
USB With Emulation of COM Port
Dimensions 65mm × 215mm × 58mm
Supports only ASCII (no special signs)
Supported with 24VDC 2.2A power supply
Reader/Writing Tracks 1, 2 and 3
Standards IBM, ISO, ANSI, DIN
USB With Emulation of COM Port
Dimensions 65mm × 215mm × 58mm
Supports only ASCII (no special signs)
Supported with 24VDC 2.2A power supply
Outdoor RFID reader 125kHz EM 13.56 Hz
MIFARE, MIFARE Plus, DESFire / EV1 Felica
IP65, IP67
Vandal safe IK08
Supporter up to 200,000 users
1 GHz CPU to 4 GB flash + 64MB RAM
Multi buzzer
Driftstempereatur: -35 - 65 C
Weight: 144g
Dimensions: 48 x 145 x 27 mm | RS-485 Master or slave
10/100 Mbps ethernet
1 x Relay
PoE
Supply voltage: 12V DC
Kvitteringsprinter
Termisk
Stikdæksel
Hovedapparat
Dæksel med aktiveringsknap
Rullepapir
Styreplade til 58 mm bredt papir
PS-180 & AC-kabel
Hurtige termiske bonprinter til USB
MDB Master / Slave Controller via USB
Simple API for integration
can function as VMC or payment terminal
USB-COM Port ACM Driver
Built-in relay, can be controlled via command
Power supply via USB or MDB
Does not provide power output on the MDB port
Technical demanding product - Support for setup / integration can be purchased
For passive UHF tags 865MHz
Supports ISO18000-6B, ISO18000-6C
RF power: 0.1 - 1 Watt
TAG reading is controlled via software commands
Interface: RS232, RS485 and Wiegand 26/32
Circular polarized antenna
RS-232, RS-485, Wiegand 26Bits/32Bits
5V DC power supply / 2 Watt
Dimensions: 220 x 220 x 50 mm
Weight: 1.5 kg
IP65
Seiko Instruments RP-E11-K3FJ1-E-C5, POS, Termisk, 350 mm/sek., 8,3 cm, 5,8 cm
USB 2 x PC splitter
2 x DB9 special cable output (DB9 to USB)
1 x RS232
USB Power (5VDC)
Speeds from 1200bps to 115200bps with select
OS support: Windows OS, MAC OS X, Linux
Incl. 2 pcs. DB9 male to USB-A male cable 1,2m
Operating temp. 0 - + 50 ° C
Hurtige termiske bonprinter til ethernet
IC / RFID / MAGNET motor card reader
USB interface
3 in a card reader
Automatic card operation from 2 pages
For example. parking lots, payment terminals, kiosk etc.
4 PIN PSU interface
Personell who shall document the route with the date and time
RFID TAGs placed at check-points and has unique ID
RFID TAG is 125kHz EM400X
guard pointing toward Days and press the scan button
Each TAG reading acknowledged with short vibration
Operation with a pressure
Journal memory: approximately 14,000 items
battery - easy to replace
up to 55,000 scans at full battery
interface is USB
Operating temperature: -10 to + 55 ° C
Patrol Tour Manager software included
Support for setting up PAY terminals.
You will be guided through Nayax portal and get help to set it up your first terminal.
Limited to two hours
Reading distance: Read > 500cm, Write > 20cm
RFID tag: ISO-18000-6B, ISO-18000-6C
Operating frequency: 865-868MHZ, 902-928MHZ
Bluetooth 4.0, USB 2.0
RF output: 18~26 dBm(adjustable)
Rechargeable lithium battery
Standby time 150 Hours
Working Temperature -20C°C to +50°C
Windows, Android, iOS, Mac OS
Fanless
4 x COM (DB9, with power output, +5VDC/+12VDC, selectable by Jumper)
2 x COM (Internal, reserved for VFD Customer Display and MSR)
1 x DB25 Parallel Port
5 x USB 2.0 (External, 4 x bottom/ 1 x side)
RJ-45 Gigabit LAN
VGA
1 x 12VDC (Output) Jack for Customer Display or 2nd Display
1 x RJ-11, +12/+24 VDC (Cash drawer)
+12VDC 60W, 4-pin Connector with Lock
355 x 302 x 204 mm
866 - 868MHz CE, equipped with 12dBI linear antenna
EPC Class 1 gene 2 (ISO18000-6C)
from 0 ~ 20 meters reading distance (depending on the surroundings)
from 0 ~ 7 meters of writing distance ( Depending on the surroundings)
Linux OS, Indy R2000 RFID chip, fast and precise reading rate
Ethernet connection
445 × 445 × 100 mm (l × W × H)
Operating temperature: -20 ~ + 60 ° C
IP65
Option: RS232 / 485, USB, GPIO, Wiegand 26/34, 4G LTE and WiFi
Option: Poe
Reading distance: Up to 100cm
RFID tag: ISO 18000-6C
Operating frequency: 865 – 868 MHz
Mode: Single Read / Multiple-tag Read
Bluetooth® 2.1 + EDR (Class2)
Interface: BT HID, BT SPP, USB HID, USB VCP, Memory
Rechargeable lithium battery
Working Temperature: -10 to 55˚C
Wireless Multi-Connected Dongle (Optional)
Fanless POS Terminal
IP54 tæt i aluminiums kabinet
Intel Atom processor (1.6Ghz / Dual 1.8GHz)
DDR2 / DDR3 RAM Module (op til 4G)
15" touch screen, IP54 tæt
Med væg eller VESA montering
MSR / Customer Display / 2nd VGA Display
I/O porte med 1 x Gigabit LAN
Outdoor UHF RFID reads and writes
for Passive UHF 865MHz TAGs
TAG protocol: EPC Class 1 Gen 2
ISO 18000-6C
Reading/writing is controlled via software commands
Software App Platform: API (C ++, C #) Development Kit
Up to 10 m Reading distance, depending on UHF Tag
built-in 8DBI antenna, circular polarity
IP67 Plastic cabinet
Operating temp: -40 - + 75 ℃
150 ~ 240VAC / 50Hz adapter with 12VDC / 3A out
Dim: 259 × 259 x 100mm (L × B × H)