RFID / Barcode / Magnet stribe / TAGs / POS

Payment system for vending machines, doors etc.
Accepts contactless & nbsp; chip, magnetic stripe and MobilePay
GSM (SMA) and LAN (RJ-45)
2 x digital outputs. & nbsp;
1 x deaktiveringsindgang. Can be configured to deactivate the machine
Can be connected to a vending machine, washing machine, door, etc.
Web-based control panel, can be operated over the Internet
Support for setup can be purchased
Comes with SIM card
User agreement with service provider is required

BEMÆRK: Kontrakt med DANBIT A/S og Brugeraftale med serviceleverandør SKAL etableres før køb!

Betalingssystem med touch display.
All-in-one med POS og Data-kommunikation i samme hus
Accepterer kontaktløse kort og MobilePay.
GSM antennestik MMCX stik
6 digitale OC. pulsudgange til automat/vendingmaskine, maskiner, døre etc.
6 digitale indgange, inhibit, for at stoppe køb ved mangel/fejl
Konfigureres via platform med priser og funktioner
Kan tilkobles en salgsautomat, vaskemaskine, dør, osv
Web-baseret eller MQTT Cloud
Kommunikation: LAN eller 4G
Support til opsætning kan tilkøbes.
Leveres med SIM kort klar til funktioneopsætning
Forsyningsspænding: 10-24VDC, 10-42VAC / 2A (PSU medfølger ikke)

Top-class scanner for item and product registration
Professional Multi Reader and Writer for RFID and Barcode 1D/2D/QR etc.
Powerful circular polarized antenna
UHF RFID read and write up to 25 meters, depending on TAG
UHF TAGs are passive - without a battery
Reads NFC and Mifare TAGs
Reads up to 900 TAGs per second
Barcode reader CCD: 1D, 2D, QR codes
Access to the APP Center with programs and tools
13MP camera with flash
5.2" Display - 1920 x 1080p with touch
Communication: dual band Wifi, Bluetooth, 4G LTE
Dual SIM or Single SIM and Micro CD card
GPS/AGPS, GLONASS
Battery: 8000mAh Li-ion (approx. 12 hours of operating time)
IP65 tight. 1.5 meter drop tested
Operating temperature: -20 - +50°C

125kHz RFID TAG as bracelet
diameter: 68mm
Blue (red on order - Contact us)
Net weight: 9.3 g
EM Standard: TK4100, ICODE2 chip
material : Silicone
operating temperature -40 - + 100ºC
storage temperature -40 - + 120ºC

Universal electric car charging stand for all EV vehicles
Allow two electric cars to charge at the same time
Smart design
Dynamic management of charging
Interface protocol: OCPP 1.6
Payment for parking and charging by payment card
Monthly fees apply
AC Input 230-400 VAC +/- 10 (2 or 3 phase)
Total Power output 2 x 22kW / 2 x 32A Max (load sharing)
Payment: Payment card, Google Pay, Apple Pay (option: MobilePay)
Communication: 4G
IP degree: IP55
Operating temperature: -25 C° to 55 C°
Dimensions: 520 x 360 x 260 mm
Charger cable not included. The user uses the cable that comes with their car.

NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase!

Payment system with touch display.
accept contactless, chip, magnetic stripe and mobilepay.
GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine
can be connected to a vending machine, washing machine, door, etc.
Web-based control panel.
Communications Internet or WiFi or 4G
Support for setup can be purchased.
Supplied with SIM card (4G)
Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)

ISO magnetic card with High Coat magnetic stripe.
Can be delivered with color printing for extra payment.
Cards with the same print for quantities of 25 or more. and up.
Price is per piece.

RFID UHF 865MHz PVC Bracelet
One-off closure
Adjustable size
Waterproof
Operating temperature: -30 ~ 75 ° C
White
Width 2.7 mm
Length Shared 100 mm
total length 278 mm

UHF RFID Take with Strip
Frequency: 860-960MHz
Blue
Width 30 mm
Length Sign 110 mm
Height / Thickness 12.5 mm
Length Strips 215 mm
Total Length 325 mm

125kHz TAG
rectangular, transparent plastic
Dim: 20 x 25 x 0.7 mm
TAG is waterproof

125kHz RFID TAG
For key ring
Dimensions: 37 x 30 x 8 mm
with printed UID code
TAG is waterproof

Mifare Classic 1K RFID Tag
Reading distance: 0 - 5 cm
ISO14443A
1 Kilobyte Memory
768 byte Free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Cannot be changed
blue key ring
Frequency: 13.56MHz
Material: ABS, IP68
DIM: 40 x 32 x 4 mm

Passive 865 MHz RFID PVC tag (860 - 960MHz)
0 - 10m depending on antenna gain
ISO short format 86 x 54 x 2 mm - card holder available
Protocol: ISO 18000-6C (R / W)
Card ID in other sector.
Operating temperature: -25 ℃ ~ + 65 ℃

Tag, key ring
target: 35 x 2 x 4 mm
with engraved UID code
tag is waterproof

Passiv 865 MHz RFID holder til RFID865TAG-W

Passive 865 MHz RFID PVC Tag
0 - 10 m depending on antenna Gain
ISO Short format 86 x 54 x 0.5mm
protocol: ISO 18000-6C (R / W) - 96bit EPC / 512bit User
Tag ID UID in the second sector.
Read and write: 100,000 times
Material: Paper
Operating temperature: -20 - + 85 ° C

125kHz RFID TAG
Designed as screw
plastic
9.5 mm Thread
12 mm head
19 mm long.
TAG is waterproof

Ceramic UHF Take against metal
survive Temp: -40 - + 250 ° C Short-lived
can autoclaved several times
operating temp: -40 - + 85 ° C
Alien Higgs-3 chip < Br> Objective: 10 x 5 x 3 mm
Weight: 0.8g
reading distance: Up to 3 meters (1 watt reader)
suitable for location against metal - can give better reading distance
read / write : 100,000 times
Data Storage: Over 10 years
IP68 

Frequency: 860-960MHz
PVC / PET
ISO18000-6C (EPC GEN2)
Dimensions: 86x54x0.8mm
Operating temperature: -25C - 85 degrees

125kHz RFID TAG for adhesion
Dim: 20 x 3 mm
3M tape
black
TAG is waterproof

Mifare Classic 1K RFID Tag
Reading distance: 0 - 10 cm
ISO14443A
1 Kilobyte Memory
768 byte Free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Can't change
Frequency: 13.56MHz
Material: ABS, IP68
credit card format
Numbered - printet on the card
target: 85.7 x 54 x 0.8 mm

Passive 865 MHz RFID PVC TAG
0 - 2m depending on antenna gain
TAG format - Adhesive Paper
Protocol: ISO 18000 6C (R / W) - 96bit EPC / 512bit user
TAG ID UID in other sector.
Dimensions: 121 mm X 44 mm X 0.4 mm
weight: 2 g
Operating temperature: -10 to +60°C.

125kHz RFID TAG
credit card size 0.8 mm
sequential ID
TAG is waterproof

Mifare Classic 1K RFID Tag
Reading distance: 0 - 10 cm
ISO14443A
1 Kilobyte Memory
768 byte free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Cannot be changed
Frequency: 13.56MHz
Material: ABS, IP68
credit card format
Dim: 85.7 x 54 x 0.8 mm

125 kHz RFID TAG
Dim: Ø25 x 3 mm
TAG is waterproof

TAG, round piece, self-adhesive
1.7 x 25 mm
TAG is waterproof

Take, credit card size 0.8mm.
Tags are waterproof

Dallas iButton tag med unikt indkodet nummer

TAG, cylinder, black
4.5 x 30 mm
TAG is waterproof

Dimensions: 119.6(L) x 76.6(W) x 15(H)mm

Passive 865 MHz RFID PVC Tag
0 - 2 meters Depending on Antenna Gain
TAG Format 55 x 10 x 1.6 mm - for textile - Flexible
protocol: ISO 18000-6C (r / W) - 96bit EPC / 512bit User
TAG ID UID in the second TAG sector.
Weight: 1 g
Operating temperature: -20 - +50°C,

125kHz EM TAG with magnetic stripe
credit card format
0.8 mm, incl. Magnetic stripe
TAG is waterproof

125kHz RFID TAG
For Keyring
Waterproof
Durable
Gray
Dimensions: 40 x 30 x 7 (L x W x D)

RFID TAG mounting on metal
Passive 865 MHz RFID PVC Tag (860 - 960MHz)
0 - 5 meters depending on antenna Gain
TAG Format 138 x 30 x 5 mm
protocol: ISO 18000-6C (R / W) - 96bit EPC / 512bit User
TAG ID (UID) in the second sector on the roof.

125kHz RFID TAG with screw hole
50 mm diameter x 2.5 mm
suitable for guard rounding as checkpoint
Ask 64 bits,
Manchester Encoding; 10 Digits in HEX

RS232 Cable for Bargun Omni
Cable Length: 2Meter
DC Box located 20 cm from DB9 She connector.

Net adapter 12V, 1A - Switch mode
Output: 12VDC / 1Amp
230VAC input
Power plug: 5.5 / 2.5 mm
Cable color: + Red, - White

Active RFID tag bracelet 2.4 - 2.48GHz
Output power -6dbm
Active operating mode
3 year battery life (depends on usage, can be changed)
0-80M distance
IP68
Weight: 40g
Operating Temperature: -40 ℃ ~ + 60 ℃
Dimensions: 250mm × 31mm × 15mm (L × W × H)

Module with 1 relay output
5VDC from optically isolated digital input
GND, VCC, IN (digital input)
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A - non inductive load!

Tilbehør til MCRW123O+USB

Module with 2 relay outputs
5VDC from optically isolated digital input
GND, VCC, IN (digital input)
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A - non inductive load!
REMEMBER THE RIGHT CABLE FOR YOUR NAYAX TERMINAL!

S/H bånd til 1000 kort (til PRINT-ID/PRINT-ID-MAG)

Evolis R2011

5V relay print
GND, VCC, IN
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A

5V relay print
GND, VCC, IN
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A

20 pcs. Mifare Transponder / TAG to Keychain
Mifare Classic 1K RFID TAG
Reading distance: 0 - 5 cm
ISO14443A
1 kilobyte Memory
768 byte free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed
Gray key ring
Frequency: 13.56MHz
Material: ABS, IP68

Zebra 8000T Z-ENDURE

MDB Male and Female
DEX Male and Female

module with eight relay output
5VDC from optically isolated digital input
GND, VCC, IN (digital input)
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A - non inductive load!

Trigger til at åbne pengeskuffer med Epson, Citizen eller Star interface

Mifare Classic1K TAG
designed as key ring
Bag with 20 pieces.
reading distance: 0 - 5 cm
ISO14443A
1 kilobyte Memory
768 byte free in 16 sectors / 4 Blocks / 16 byte
UID code is factory programmed - cannot be changed
Frequency: 13.56MHz
Material: ABS, IP68
Dim: 40 x 32 x 4 mm

Tilsluttes RS232 (serieporten)

RFID 125kHz reader with RS232
EM 4xxx Standard Tag (40 bit HEX)
Mounting in Ø 31 mm Hole
Length from Resess: 27 mm
Resess Width: 40 mm
RS232 , 9600, N, 8, 1
9 - 12VDC / 50mA
Temperature: -10 - + 70 ° C
Material: PBC
IP54 from front

Active 2.45GHz RFID TAG
2.45GHz read/write
Range up to 90 m
Dimensions: 42W x 30H x 10D (mm)
weight: 9.1g
Wireless programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
Built-in SOS button

Active RFID Take with key ring pendant
2.45GHz read and write
Dimensions: 42W x 30H x 10D (mm)
weight: 8g
Wireless TAG programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
FCC, CE Certified

Kan indsætte diverse formateringstegn, f.eks. linjeskift.

Programmerbar magnetkortlæser med PS/2 interface. Lysdioder sikrer optisk kvittering, akustisk lydsignal ved korrekt aflæsning af magnetkort.

Opsætnings softwaren virker kun på en Windows XP pc der har en PS2 keyboard port

MDB Male and Female
EXT-MCR
TEMP
GND
DOOR OPEN
DEX Male and Female
RS232

Genopladeligt Li-ion batteri, 3,7V, 1620mAh

Trigger to open cash drawers with Epson, Citizen or Star interface

1D, 2D barcode reader
Wireless 2.4GHz (RF dongle) or USB-A for USB-B cable
Reading distance: 10-500mm
Operating time: Approx. 16 hours
Recharge time: Approx. 6.5 hours via USB-B
Memory: 512K (over 5000 barcodes)
Dimensions: 150mm (L) x 70mm (W) x 95mm (H)

MDB Cable with RS232 Converter
for integrating Pay Terminal into a PC system
Demo software included
Power supply: 24VDC / VAC @ 0.5A (not included)
Dimensions: 100 x 50 x 30 mm

Active RFID Tag with hole for pendant + vibration sensor
2.45 GHz read and write
Transmission distance 90 m
Dimensions: 42W x 30H x 10D (mm)
weight: 9.1g
wireless programming
Digital RSSI/LQI Data
low battery warning
Supplied without 1 x 2032 battery
Built-in button
FCC, CE Certified

Active RFID Tag with key ring and vibration sensor
2.45 GHz read and write
Dimensions: 42W x 30H x 10D (mm)
weight: 8g
Wireless tag programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
FCC, CE Certified

Paper- Printer Accessories - Thermal

1D and 2D bar code reader with index finger strap
Up to 30 meters with 2.4 GHz
Bluetooth, 2.4 GHz
USB with FLASH memory
Up to 100,000 codes
Built-in Li-ion battery is charged via USB plug
Compatible with iOS, Android and up to Windows10
Right-handed or left-handed operation
1D barcodes
2D / QR codes

Farvebånd til 200 kort (til PRINT-ID/PRINT-ID-MAG)

Evolis R3011 color ribbon

MDB Cable with USB Converter
USB-COM Port FT232RL
for integrating PAY terminal into a PC system
Demo software included
Power supply: 24VDC / VAC @ 0.5A (not included)
Dimensions: 100 x 50 x 30 mm

RFID Copy Reader / Writes to T5577 RW Tag
interface: USB
Work voltage: 5 VDC
Work current: 200mA
Standby Stream: 50mA
Normal current: 100mA
125kHz, 13,56MHz Mifare / NFC
Compatible with CCID and PC / SC
IC / ID Dual Frequency Replication
Supporter ID125K, 8800, 5200, 4305, 5577, 8265 Card
Support UID, Fuid, Cuid, UFUID
IC Semi-Encrypted Card, IC Full Encryption Card
Dim: 108 (L) x 68 (W) x 12 mm (H)

Keyboard emulation: 8 decimal places (HID)
frequency: 125 kHz EM 4001/4002
Power supply: 5VDC from the USB port
Operating temperature: -10 - +75°C 
Humidity during operation: waterproof
Reading range: 5 ~ 15 cm
Cable length: 164 cm
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
wall mounting, water resistant

Kan læse kort hvor magnetstriben vendes mod eller væk fra brugeren

Keyboard emulation: 10 digits, 40bit ASCII Decimal
frequency: 125 kHz EM 4001/4002
Power supply: 5VDC from the USB port
Operating temperature: -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable length: solved USB cable
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Desktop - desktop model

Active 2.45GHz RFID TAG card
2.45GHz read and write
Transmission distance 140m
programmable parameter
Supplied without 2 x 3V CR2032 battery
Dimensions: 86W x 54H x 6D (mm)
Weight: 25.8g
wireless TAG programming

Comes with cable for USB.

1D wireless barcode scanner with USB RF dongle
wireless row side is typically 30 meters
built-in memory for approx. 400 scans
Supports all common 1D barcodes
Radio Technology: Zigbee

reads ISO tracks 1, 2 and 3

RS232 interface

Keyboard emulation: 10 digits, 40bit ASCII, Decimal
Frequency: 13,56MHz Mifare Ultralight
Versions: Mifare S50, S70, ISO15693, ISO14443A / B
Power supply: 5VDC from USB port
Operating Temperature: -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable length: solved USB cable
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Desktop - desktop model

Keyboard emulation: 8 digits, 32-bit ASCII, Decimal
Frequency: 13,56MHz Mifare Ultralight
Versions: Mifare S50, S70, ISO15693, ISO14443A / B
Power supply: 5VDC from USB port
Operating Temperature: -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable length: solved USB cable
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Desktop - desktop model

Keyboard emulation: 8 digits, 32bit ASCII, Decimal
Frequency: 13.56MHz Mifare Ultra Light
Versions: Mifare S50, S70, ISO15693, ISO14443A/B
Power supply: 5VDC from USB port
Operating temperature: -10 - +75°C
Reading distance: 5 ~ 15 cm
Cable: Mount the USB cable on the back
Dimension: 118 (L) x 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof IP67, wall mounting

Keyboard emulation: 10 digits, 40bit Hexadecimal
Frequency: 13,56MHz Mifare Ultralight
Versions: Mifare S50, S70, ISO15693, ISO14443A / B
Power supply: 5VDC from USB port
Operating temperature : -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable: Fixed USB cable on the far side
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof - IP67

Keyboard emulation: 8 digits, 32bit Decimal
Frequency: 125kHz EM4xxx
Power supply: 5VDC from USB port
Operating temperature : -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable: Fixed USB cable from bottum - epoxy filled
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof - IP67

Keyboard Emulation: 10 digits, 40bit HEX
Frequency: 13.56MHz Mifare Ultra Light
Versions: Mifare S50, S70, ISO15693, ISO14443A / B
Power supply: 5VDC from USB port
Operating temperature : -10 - + 75 ° C
Reading distance: 5 ~ 15 cm
Cable length: Solved USB cable
Dimension: 118 (L) x 75 (w) x 17 (h) mm
Weight: 250g ± 10%
desktop - table model

Dual band RFID TAG card
2.45GHz and 13.56MHz Mifare read/write
Programmable parameter
Dimensions: 86W x 54H x 6D (mm)
Weight: 25.8g
Combine active and passive RFID
Long operating time on battery
Wireless TAG programming
Supplied without battery (2 x 2032)

Keyboard Emulation: 8 digits, 32bit HEX
Frequency: 13,56MHz Mifare Ultra Light
versions: Mifare S50, S70, ISO15693, ISO14443A / B
UID in positive Normal sequence
Power supply: 5VDC from USB port
Operating temperature: -10 - + 75 ° C
Reading distance: 5 ~ 15 cm
Cable length: Solved USB cable
Dimension: 118 (L) x 75 (W) x 17 ( H) mm
Weight: 250g ± 10%
desktop - table model

Reads ISO tracks 1, 2 and 3
USB interface
Emulates a USB keyboard (HID)
Powered by the USB port
Reads e.g. health insurance card/health card - with æ, ø, å
Optional reading of tracks is possible with inserted end character
Omitting text in tracks is not possible.
Dimensions: L 137 x W 49 x H 50 mm

Magnetic card reader - HID. Keyboard emulation
Magnetic card reader for PS2
Can be connected via USB with adapter
USB adapter may require a restart of the PC!
PS/2 to USB adapter included
A reader head / tone head
Black
Works with OS up to and including Win 10
Can read Æ, Ø, Å. oh, oh, oh
Suitable for clinics for reading health cards
Dimensions: L 137 x H 50 XB 49 mm

125khz RFID reader for outdoor mounting on wall
sealed with hardened epoxy - cable mid rear
EM4000 125khz RFID Reader for wall mounting
reading distance 0 - 5cm, depending on roof size
40 bit code, 10 digits ASCII (Decimal)
RS232, only TX. GND
9600, 0 Start, 8 Data, 1 Stop, Non Parity, FLOW: HW
Wiegand 26bit format
LED Indicator and Buzzer Control Manager
Supply voltage: 12VDC / 200ma
Cable length 1 meter (8 Core)
Goal: 114 x 46 x 13 mm

Reading distance: Up to 5 cm
Frequency: 13.56 MHz
Read Mifare Ultralight and Mifare F1 Standard Tag
Mifare 1024/4096 byte, Ultralight 512bit, ISO 14443A
3 in 1 interface : Wiegand, MSR ABA TK2 and RS232
LED and Buzzer
Quick Data Transfer
Weatherproof, ABS
Cable Length: 90 cm
Cable is not terminated with DB9
Easy to install
Supply: 5 - 18VDC (Liniary PSU)
Dim: 83 x 47 x 16 mm

Dual band RFID card reader for USB - 10 Decimal
125 kHz: EM-Marin EM41xx, EM4200
13,56MHz: Mifare - ISO14443A
HID - Keyboard Emulation
Reading distance: 5 to 8cm
Powered by USB
USB interface
operating temp. -10 ° to + 70 ° C
dimensions: 98 x 63 x 10mm (L x B x H)

Dual band RFID card reader for USB - Decimal
10 characters decimal (ASCII) - 40bit
125 kHz, 13.56 MHz, NFC
125khz: EM4001, EM4002, EM4200
Mifare: ISO 1443A/B/15693
HID - Keyboard Emulation
Reading distance: Up to 10 cm
Align via USB
USB interface
Dip-SW to ID format setting - see Table 
Environment: IP67 Waterproof, outdoor mounting
operating temp. -25 ° to + 70 ° C
target: 88 x 56 x 18 mm

Dual band RFID card reader for USB - Decimal
10 characters decimal (ASCII) - 40bit
125 kHz, 13.56 MHz, NFC
125khz: EM4001, EM4002, EM4200
Mifare: ISO 1443a / B / 15693
HID - Keyboard Emulation
Reading distance: Up to 10 cm
Align via USB
USB interface
ID Format setting with DIP switches - see Table
Operating Temp. -25 ° to + 70 ° C
target: 88 x 56 x 18 mm

To track 1, 2 and 3
Connects via PS2 port
Software not required
data will be inserted where the cursor is (HID)
Sound, reading speed, line breaks and æ, ø and å can set
Weight: 200g
Dimensions: 100 x 34 x 28
cable length: 2 meters
supply voltage: 5VDC (from PC)

Mifare reads with USB
13.56MHz
USB HID (plug and play)
Powered from USB
Additional purchases from Decimal to HEX, normal or reverse
Additions with start and or stop character
Supports: ISO14443A, ISO18092 FeLiCa tags
Dimensions: 100 x 65 x 23 mm
Material: ABS
REMEMBER: Order the desired version - additional purchase

125kHz EM 4xxx reader with USB
USB HID (plug and play)
Powered from USB
Additional purchases from Decimal to HEX, normal or reverse
Additions with start and or stop character
Supports: EC standard 125kHz
Dimensions: 100 x 65 x 23 mm
Material: ABS
REMEMBER: Order the desired version - additional purchase

omvandlare