Subcategories
Active filters
Restlager: Trådløs PC nøgle
Radiostyret PC-sikkerhedslås til USB-porten
Beskytter PC’en mod at andre kan bruge den.
Radiomodtager til USB-porten og lille sender til lommen.
LED indicator for door lock with green and red light.
Door status Red / green LED light indicator. 12 / 24VDC /1.2Watt.
Electrical bolt lock for door frame, 24V 550mA - magnet-position sensor. Locked with excitement. Open without excitement.
Electrical bolt lock for door frame with lid guide
24V, 550mA
Hold force: 1000 kg
Holdebolt has a diameter 16mm and goes 16mm out
Input / output button
Delay Time 0 Sec , 3 Sec, 6 Sec, 9 Sec.
Screws and fittings included
Thermal sensor for mounting 10 meters with the Dallas DS18B20
Thermal sensor for mounting incl. 10 m wire
Access control for controlling the electronic door lock via the mobile phone Android APP, Bluetooth
Bluetooth
Up to 196 users
APP for Android - e-access E1196
Range up to 50 meters
Can be set to open by pressing in the APP
Can be set to open automatically when you are within range
Built-in buzzer 85dBA can be activated when the door is open.
When you choose to activate Bi-stable function, you can press down the E button on the screen for a few seconds to activate and keep the door unlocked indefinitely.
Does not save events (no log function)
1 x pneumatisk pullert 90cm uden styring og installation
Pneumatisk pullert uden styring til vejspærring/ tyverisikring.
Til udendørs brug
Rustfrit stål
90 cm høj, diameter: 16,8cm
103 Kg
LED indikering
Tyverisikret
OBS: kræver styring
LPR camera for number plate recognition, IP67 close, H.265, IK10, vandal proof
Reading of license plates with the speed of 0-200 km / h
can register license plates for up to four lanes to 5-Megapixel resolution at 30 fps
Built-in infrared white LED (approximately 60 meters)
RJ45 gigabit port
Sound alarm
ONVIF support
Motion detection
WDR
Micro SD
PoE
12VDC / 24VAC
Extended operating temperature -40 - 60 °
Electronic lock for mounting on cabinets and doors, holding force aprox. 100kg, 12-28VDC
Compact motorized lock with separate pal
Locked without power
releases the locking pawl by transient voltage
two lock entrances
Can be mounted in 2 different ways
Control voltage - 12 - 28VDC / VAC max. 165mA
Dimensions: 60 x 60 x 22mm
Outdoor wireless PIR sensor - infrared motion sensor with antenna, battery operated, 35 m
Wireless infrared outdoor PIR motion sensor
External antenna
Adjustable range sensor 10-35m / 750 sqm
Battery operated 2 x AAA 1.5 volt
Operating temperature -20 to + 55 °
IP55 close to 150 meters line-of-sight
For wall mounting (fittings included)
The system does not work without reciever PIR-WL-R
Modtager til PIR-WL35 - styreenhed til eksternt udendørs trådløst PIR system
Modtager/ styreenhed til trådløst PIR system
Håndterer 1-3 sensorer/ detektorer
Forsynes via 12V dc 35mA
Driftstemperatur -20 til +55°
IP65 tæt til udendørs brug
Frekvens 433 MHz - rækkevidde 150m
Til vægmontering
Virker ikke uden PIR sensor PIR-WL35
Trådløs PIR sensor til loft montering
Tilbehør til tyverialarm ALARM-GSM-BASE
Indstrålingsbeskyttet
Detektionsafstand 6-8 meter
360 graders vinkel måling
installationshøjde 3-5 meters
Forsynes med 3.6V lithium batteri
PIR alarm med infrarød og bevægelses sensor
Tilbehør til ALARM-GSM-BASE
Tilbehør til ALARM-GSM-REPEATER
Dobbelt sensor med infrarød og bevægelse
Undgår falske alarmer
opdagelses distance 8 til 12 meter
Trådløs indendørs sirene
Tilbehør til tyverialarm ALARM-GSM-BASE
Forbindes trådløst til alarmsystem
Trådløs sirene med nem stik kontakt montering
Wireless 433MHz Extender for wired alarm sensors Connected Alarm GSM Base
Tilbehør til ALARM-GSM-BASE
Tilbehør til ALARM-GSM-PIR-UD
Kan blive trådløst tilsluttet til en alarmbase
Til tilslutning af kablede alarmsensorer
Til udendørs brug + stænktæt
Forsyningsspæning: 13.8V 200mA
GSM Alarm controller with alarm via SMS. 6 x analog input v / 0-20mA, 8 x digital input 4 x relay output, APP, 4G
8 x digital inputs NC / NO Type
6 x analog inputs. 12 Bit resolution, 0-5V, 4-20mA or 0 - 20mA
4 x Relay outputs 5A / 30VDC, 5A / 250VAC
1 x USB port
GSM 3G 4G
9-36VDC (12V / 300mA)
Backup Battery 3.7v 1200mAh
Operating temperature -10- + 70 °C
Adapted SMS Alarm Messages
APP for iOS and Android
Electronic lock, non-power locked 12VDC
Electric endplate 70mm
Error-proof - not suitable for back pressure
Quick and easy installation
Static holding force & nbsp; 454 kg
12VDC
Dimensions: 70 x 43 x 25mm
Payment system with 2 units for contactless card, chip, magnetic stripe and MobilePay
Payment system for vending machines, doors etc.
Accepts contactless & nbsp; chip, magnetic stripe and MobilePay
GSM (SMA) and LAN (RJ-45)
2 x digital outputs. & nbsp;
1 x deaktiveringsindgang. Can be configured to deactivate the machine
Can be connected to a vending machine, washing machine, door, etc.
Web-based control panel, can be operated over the Internet
Support for setup can be purchased
Comes with SIM card
User agreement with service provider is required
Payment terminal with touch display for contactless cards, chip, magnetic stripe and mobilepay
NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase!
Payment system with touch display.
accept contactless, chip, magnetic stripe and mobilepay.
GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine
can be connected to a vending machine, washing machine, door, etc.
Web-based control panel.
Communications Internet or WiFi or 4G
Support for setup can be purchased.
Supplied with SIM card (4G)
Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)
Access Recognition Access Control, RFID and Fingerprint Reader, Touch Display. Auto height adjustment. Patented anti-fake
Face creation with RFID and fingerprint reader
Advanced fake finger detection
Touch Keypad and Voice Over IP Doorphone
Max Users: 250,000 (Finger) / 10,000 (face)
Up to 10 million logs And up to 20,000 photos
Resolution: 500 dpi
RFID: 125kHz Em, 13.56MHz Mifare, HID prox
supplied via POE or 12VDC
Dimensions: 149.5 x 207.8 x 45.5 mm
Operating temperature: -20 - + 60 ℃
Technical demanding product - Support hours can be purchased
Electronic 12V 0.8A metal lock for e.g. theft protection of smaller items / units
Electronic lock
DC 12V up, 0.8A
Metal
Cable length 36cm
Weight: 155g
Electronic lock, for mounting on cabinets and doors, closing control, holding force of 50kg, 12VDC
Compact motor-controlled lock with separate pawl
Control voltage - 12VDC
With door-closed status
Holding force: 50 kg
Operating temp. -10 ° C - + 55 ° C
Dimensions: 41 x 35 x 19mm
Pal: ø9mm, 18mm
Weight: 0.11kg
Can be used on wood, aluminum and metal
Electronic mini door magnet, 36 kg holding force, 12VDC. Suitable for cabinets, IP65
Miniature Electronic holding magnet for cabinets and closets
Supply Voltage 12 VDC, 140mA minimum
Holding force up to 36 KG
Operating temperature: -10 ~ 55C
IP65 close Stainless steel with epoxy filler
magnet dimensions: 70 x 38 x 26 mm
Counter-plate dimensions: 80 x 32 x 18.5 mm
Weight of 350 g
GSM Alarm with 2xDin, 2xain and 2XDO. Alarms for mobile phone via SMS or Call, APP, 4G
2 x digital inputs NC / NO type
2 x analog inputs. 12 Bit resolution, 0-5V, 4-20mA or 0 - 20mA
2 x Relay outputs 5A / 30VDC, 5A / 250VAC
1 x USB port
GSM 3G 4G
9-36VDC (12V / 300mA)
Backup Battery 3.7V 1200mAh
Operating temperature -10- + 70 ° C
Custom SMS Alarm Messages
APP for iOS and Android
Accessory: Full MDB cable for PAY2 and Onyx Payment Terminal
MDB Male and Female
EXT-MCR
TEMP
GND
DOOR OPEN
DEX Male and Female
RS232
Accessories: Basic MDB cable for VPOS Touch and Onyx
MDB Male and Female
DEX Male and Female
Outdoor finger scanner with PoE, 2.8 TFT LCD screen, RFID, 1.0 GHz Single core, 8GB flash, 256MB RAM
Outdoor finger scanner with RFID and PoE
Up to 500,000 users (1 finger)
Up to 10 fingers per. user
up to 3,000,000 log
CPU: 1.0 GHz Single Core
Memory: 8GB flash + 256MB RAM
2.8 "color TFT LCD
16-bit audio
Operating temperature: - 20 ° C ~ 50 ° C
Weight: 440g
Dimensions: 142 x 145 x 45
Built-in tamper alarm
Built-in Wifi (IEEE 802.11 b / g)
Ethernet: 10/100 / 1000 Mbps, auto MDI / MDI-X
RS485, Wiegand, TTL input, USB 2.0
1 x Relay
Power supply: PoE
Waterproof electric door magnet, prepared for 12 / 24VDC - see Label, IP65 for outdoor use. Holding force up to 272 kg.
Door magnet with team power up to 272kg
stainless steel and vandal safe
IP65 - Designed for harsh outdoor environment
Supply voltage: 12VDC or 24VDC 6WATT
Prepared for 12 and 24VDC - view Label unit.
No holding force at zero voltage
Dim: 218 x 44 x 27.5 mm
Dim plate for door: 185 x 38 x 12 mm
Operating temperature: -10 to + 55 ° C
Weight: 1.5kg
Buying access system - see accessories
Bracket for the door magnet. Angle bracket for DOOR-MAGNET-MINI. To outward door
Tilbehøt to DOOR-MAGNET-MINI
bracket for mounting the door magnet on the side of the frame
Strong Aluminum
Rev: LO
Mini door magnet for 12 or 24VDC, 6 watts, automatic switching, indoors and for outward door. Holding force up to 140kg
door magnet with clamping force up to 140kg
Stainless steel and vandal proof
supply voltage of teams: 12 or 24VDC, 6Watt
Automatic switching between 12 and 24VDC
Active with applied voltage
no holding power by energized
Operating temperature: -10 - 55°C
Magnetic: 200 x 36 x 23 mm
Door-plate: 152 x 32 x 10 mm
Mounting plate for the frame included
weight: 1.2kg
Electronic door magnet with clamping force up to 364KG, 12 / 24V DC,
Electronic door magnet 12 / 24V DC
363 KG holding force
Operating temperature: -10-55 degrees
Fungtighed: 0-96% non-condensing Blue Magnetic: (L) 265 (W) 29, (D) 49mm
A valve plate (L) 185 (W) 45, (D) 14mm
mounting plate (L) 265 (W) 29, (D) 6.5mm
Weight: 2.79 KG
Hardware for door magnet. Mounting brackets for DOOR-MAGNET-LOCK for inward door
Accessories DOOR-MAGNET-LOCK
bracket for mounting to the inward door (inswing)
Set consists of three parts
Strong aluminum profiles.
Good adjustability
Mini RFID Mifare reader 13.56MHz with memory. Stand-alone access control with relay output. 12vdc.
Compact Access Control for Mifare RFID
40mm in diameter, 30.2mm long
Thread is 28 mm
Can hold up to 1000 Mifare TAGs/cards
Relay output COM, NO, NC (changeover switch)
Adjustable hold timer - (potmeter) 0.5 - 100 sec.
Users are created with "master card"
Users are removed with "master card"
No software, no PC or terminal
3 different LED colors
Makes sound when programming
IP54 sealed front
Supply voltage: 12VDC / 70mA
No physical interface
Outdoor RFID reader with PoE, IP65, IP67 with 1 x relay. 125khz em, 13.56MHz Mifare
Outdoor RFID reader 125kHz EM 13.56 Hz
MIFARE, MIFARE Plus, DESFire / EV1 Felica
IP65, IP67
Vandal safe IK08
Supporter up to 200,000 users
1 GHz CPU to 4 GB flash + 64MB RAM
Multi buzzer
Driftstempereatur: -35 - 65 C
Weight: 144g
Dimensions: 48 x 145 x 27 mm | RS-485 Master or slave
10/100 Mbps ethernet
1 x Relay
PoE
Supply voltage: 12V DC
Pay terminal with touch display for contactless cards and mobilepay, pulse or MDB interface
BEMÆRK: Kontrakt med DANBIT A/S og Brugeraftale med serviceleverandør SKAL etableres før køb!
Betalingssystem med touch display.
All-in-one med POS og Data-kommunikation i samme hus
Accepterer kontaktløse kort og MobilePay.
GSM antennestik MMCX stik
6 digitale OC. pulsudgange til automat/vendingmaskine, maskiner, døre etc.
6 digitale indgange, inhibit, for at stoppe køb ved mangel/fejl
Konfigureres via platform med priser og funktioner
Kan tilkobles en salgsautomat, vaskemaskine, dør, osv
Web-baseret eller MQTT Cloud
Kommunikation: LAN eller 4G
Support til opsætning kan tilkøbes.
Leveres med SIM kort klar til funktioneopsætning
Forsyningsspænding: 10-24VDC, 10-42VAC / 2A (PSU medfølger ikke)
Waterproof protection case for outdoor access control, RFID, finger scans, face recognition
Waterproof and sunscreens
black | Material: ABS plastic
Dimensions: 15cm x 10.4cm x 9cm
Simple to install and good quality
Electronic lock for mounting on cabinets and doors. Holding power of 150kg. Hold voltage is 12VDC. Release when powerless.
Hold voltage - 12VDC
Holding Force: 150kg
Dimensions: 64.1 x 40 x 25 mm | Weight: 0.18kg
Electronic Mini Fail Secure Lock, locked current, release voltage 12VDC / 1A
Electronic Mini Lock
12VDC / 1A
Goal: 80 x 65 x 14 mm
Weight: 260g
Info kiosk with built-in sanitizer, android, receptionist calls, advertising, max. number of in-store
21.5 "Infostander 1080x1920
Touch Screen
Spritdispenser 4 liters
Low Level Sprit
Adjustable amount of Sprit
Android Based
Wall bracket or foot can be purchased (not included)
Can be used with the Danbit program "Hi Customer"
and for monitoring the number of visitors in store
Call for prices!
Waterproof electronic door magnet, 12VDC. Stainless steel house. Holding force up to 136 kg
The door magnet with holding force up to 136 kg
stainless steel housing full sealed with epoxy
Voltage for holding: 12VDC 6 Watt
No holding force at voltageless
Operating temperature: -10 to +55°C
Magnet: 170 x 32 x 24 mm
Amaturple plate: 152 x 32 x 10 mm
Anti magnetic function
Weight: Approx. 2.5 kg
Waterproof electronic door magnet, holding force 545 kg, 12 / 24VDC / 6 Watt. Bond-sensor Stainless steel, 100% sealed
door magnet with clamping force up to 545kg
Rusrfri steel cabinet full sealed with epoxy and is vandal proof
Equipped with thread for flexible tube to protect the cable
Supply voltage for team: 12VDC or 24VDC, 6Watt
Cable change-over between 12 and 24 VDC
Only holding force when energized
With Bond Sensor (Lock indicator)
Operating temperature: -10 to + 55°C
Magnetic: 220 x 62 x 41 mm
Door-plate: 185 x 61 x 16 mm
Anti-magnetic feature
Weight: ca. 5 kg
Electronic door magnet, holding force 272 kg, 12 / 24VDC with automatic switching. indoor use
door magnet with clamping force up to 272kg
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, 0.5A / 0,25A
Automatic switching between 12 and 24VDC
No holding power at any voltage
Operating temperature: -10 to + 55°C
Magnetic: 250 x 44 x 26 mm
Door-plate: 185 x 38 x 12 mm
Mounting plate for the frame: 250 x 26 x 5.5 mm
Anti magnetic function
Waterproof mini door magnet, holding force up to 272 kg. 12 / 24VDC automatic switch IP67 for extreme environmental conditions
Outdoor electromagnet for example. lattice door, gates etc.
door magnet with clamping force up to 272kg
Stainless steel and vandal proof
With waterproof gland for waterproof flex cable
IP67 close - designed for harsh outdoor environment
supply voltage by team: 12VDC or 24VDC 6Watt
Automatic switching between 12 and 24 VDC
No holding force when not energized
Magnetic: 218 x 44 x 27.5 mm
Door-plate: 185 x 38 x 12 mm
Operating temperature: - 10 to + 55°C
weight: 1.5kg
Double electronic door magnet for 12 / 24VDC with automatic switching. Holding force up to 2 x 364 kg, for indoors double-doors
Electronic door magnet for double-doors, folding door etc.
Holding force up to 364 kg for each door
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6Watt
Automatic change-over between 12 and 24 VDC
No holding force when not energized
Operating temperature: -10 - 55 ° C
Humidity: 0-95% non-condensing
Double magnet: 530 x 49 x 29 mm
Door plates: 185 x 45 x 14 mm
Double-mounting plate: 530 x 29 x 5.5 mm
Weight: ca. 5.6 kg
Double electronic door magnet for 12 / 24VDC with automatic switching. Holding force up to 2 x 544 kg, for indoors double-doors
Electronic door magnet for double-doors, folding door etc.
Holding force up to 544 kg for each door
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6Watt
Automatic change-over between 12 and 24 VDC
No holding force when not energized
Operating temperature: -10 - 55 ° C
Humidity: 0-95% non-condensing
Double magnet: 534 x 68 x 40 mm
Door plates: 185 x 61 x 16 mm | Double-mounting plate: 534 x 40 x 8 mm | weight: ca. 6.5 kg
Hardware for door magnet. Mounting brackets for DOOR-MAGNET-DUAL12 for inward doors
accessories DOOR-MAGNET-DUAL12
Mounting brackets for inward double-doors (inswing)
set contains 5 parts
Strong aluminum profiles
Measurements: The magnetic angle: 534 x 76 x 48 mm. Die-plate angles: 190 x 64 x 64 mm
Bracket for the door magnet. Angle bracket for DOOR-MAGNET-V12. For outward door
Accessories for Door-Magnet-V12
Mounting the Hold Magnet on side of Karm
mounting door plate If this is necessary
for outward door (outswing)
Heavy Aluminum profile
Dim: L 220 x D 70 x B 45 mm
Waterproof pushbutton with and breaking contact. Outdoor and is IP66, NEMA4X / 13 robust. Contact 250VAC 3Amp
All Weather Exit contact
cast aluminum housing with sturdy green button
contact DPDT (NO / NC / COM)
Monentary contact 250VAC / 3A and 125VAC / 6A
Can withstand heavy weather and extreme environments.
Ideal for doors and gates
Dimensions: W 90 x H 85 x D 58 mm
Access System with Bluetooth for electronic door lock with a request button. Auto open short distance to the door. 1,000 users.
Access is controlled by Smartphones via BT
Equipped with call button to request access
United pushbutton with light
Built in sounder
Up to 1000 users
Different user rights
3 functions: access with BT APP, access via query Exit
one administrator
BT: BLE4.2 (Low Energy)
BT range: up to 50 meters, depending on conditions
Compatibility: Android 5.0 and up, iOS9.0 and up
relay contact: NO / COM / NC (switching relay)
Supply voltage: 12 to 24VDC 1A
Operating temperature: -20 - + 70 ° C
Dimensions: 86 x 86 x 38 mm | material: plastic housing
Touch-free electric exit contact with IR motion sensor. To 10cm. Relay. Suitable for sanitary and clinical conditions everywhere
The switch is for non-contact access.
Up to 10 cm aktiveringsafstens (10 - 100mm)
Touchless EXIT contact with relay output
IR motion technology
Adjustable sensitivity
With blue and green LED
Relay switches to 12 - 28VDC, 3Amp
Stainless steel front plate
Supply voltage: 12VDC
Dimensions: 86 x 86 mm