Digital output / Relays

Remote controlled relay contacts which can be potential free physical relay contacts or as semiconductor contacts (PhotoMos) are widely used in the industry.

If you do not find a module with the inputs and outputs you want - please contact us for advice and guidance. Please provide a quantity and we will be happy to send you an offer.

DANBIT can supply a large selection of modules with built-in digital outputs as...

Remote controlled relay contacts which can be potential free physical relay contacts or as semiconductor contacts (PhotoMos) are widely used in the industry.

If you do not find a module with the inputs and outputs you want - please contact us for advice and guidance. Please provide a quantity and we will be happy to send you an offer.

DANBIT can supply a large selection of modules with built-in digital outputs as physical relays. Some modules have a combination of relay outputs and digital inputs.

They are designed for use in industrial control of machines and processes. Almost all modules support the MODBUS protocol. Power supply from a switch with PoE is also possible.

We can supply modules that are for RS485 series bus. It is gradually replaced by Ethernet-based connectivity, either as wired or wireless (Wifi).

Modules with USB interface are used for smaller systems. This connection has both advantages and disadvantages - easy to connect but unstable as they can lose data connection to the USB port without warning.

Modules with wireless communication on the 2 license-free bands (433MHz and 866MHz) are controllable of gates, lights and other, where greater range is needed and possibly. several recipients.

Digital output modules / Relays (WiFi relay) - DANBIT

Digital output / Relays

There are 52 products.

Showing 1-20 of 52 item(s)

Active filters

High Speed ​​4 analogue...

High Speed ​​4 analogue inputs 128kHz sample rate, 24-bit, 12bit 2 analog outputs, 1 EI, 7 digital I / O, -25 - + 75 ° C, PoE

4 single ended input +/- 10V analog, +/- 5V, +/- 2.5V ... +/- 20mV
128kS / s for each channel sampling rate
FIFO: 4000 samples - memory 30 million data samples
24bit resolution
2 x analog output +/- 10V, +/- 5V, 0-5 / 10V
analog output 12bit resolution
Trigger mode: SW, Ext analog
1 x 32bit counter, max. 30kHz
1 x Encoder input: Qadrant / CW / CCW and pulse
3 x digital inputs (wet) up to + 30VDC
4 x digital output (Open Collector) up to + 30VDC, 100mA
Overload protection up to 1.3A
1 x Ethernet port RJ45
Security: ID, password and IP filter
Powered by the PoE or 12 - 48VDC, 2,6W
Dimensions: 120 x 76 x 38 mm | Housing: Metal, with DIN bracket
Operating temperature: -25 - + 75 ° C

Price Call for price
Product code: ETHIO4AI2AO7IO-P-I
On the way in  
  • 8 x analog high voltage...

    8 x analog high voltage inputs +/- 150VDC, 16bit, 4 x digital output to the LAN, Pair-mode, 2 x RJ45, -25 - + 75 ° C, 12 - 48VDC

    Ethernet I/O module for the measurement of analog high-voltage differential inputs
    8 x Analog input: +/-50V, +/-150V
    4 x Digital output - Isolated Open Collector, max. 50VDC, 700mA per channel
    16bit solution
    Sample frequency: Normal mode 10 samples per second
    Sample frequency fixed mode: 50 samples per second
    Supports MODBUS TCP and UDP
    Integrated Web Server - access with ID, password and IP filter
    Power up and safe levels can be programmed
    2 x RJ45 10 / 100Mbit ports - daisy-chain
    Pair-connection - mirror one input to others output
    Supply voltage: 12 - 48VDC 4,2Watt
    Dimensions: 120 x 76 x 38 mm
    Housing: plastic with DIN bracket

    Price Call for price
    Product code: ETHIO8AI4O-2-I
    On the way in  
  • Remote control over...

    Remote control over network. 8 x powerful relays, 8 digital inputs. To temperature and moisture meter. Delayed engaging possible

    8 Potential-free relay outputs - 230Vac / 16 A, 24VDC / 10 A
    Relay outputs are individually via HTTPS, SNMP or Command
    Startup delay from 0 to 9999 seconds. Adjusted individually
    Inrush Delay is set to 1 second
    Programmable on / off sequence
    Activating relays can be controlled from sensor or inputs
    8 channel watchdog via ICMP / TCP Ping
    8 signal entrances From NO and NC units, door contacts, etc.
    Entrance to sensors Temperature, humidity and air pressure
    Messages via e-mail, Sylog and SNMP Trap MQTT
    Depending on thresholds for sensor measurement and signal input
    LED display for overall power, IP address, sensor data and error reports
    Android app and iOS app
    DIN bracket

    Price Call for price
    Product code: ETHIO8I8PR-SENS
    On the way in  
  • Mechanical Bimetal Kabinet...

    Mechanical Bimetal Kabinet termostat, 0 → +60 °C, NC (normally Closed), DIN, AC250V 50-60Hz,

    Compact design
    Wide adjustment range
    DIN Rail mountable 35mm 
    Thermostat 0 to 60 °C
    Snap-Action Contact
    Housing plastic, UL 94V-0, light gray
    Max. inrush current AC 16 A for 10 seconds
    Max. switching capacity NC: 10 A resistive / 2 A inductive @ AC 250 V, NO: 5A resistive / 2A inductive@250V 15A resistive/2A inductive@AC120V DC30W(DC24-72V)
    IP20
    Dimensions 60 x 33 x 43

    Price 170.00 DKK
    Product code: REL-TEMP-NC
    Physically in stock  
  • Ethernet Module with Modbus...

    Ethernet Module with Modbus TCP/IP. 2 x digital input, 2 x power relay output, I/O Pair connection, 12 - 48VDC

    Ethernet I/O module Modbus/TCP / UDP slave
    1 x RJ45 Ethernet
    Redundant Power Supply
    Protocol: TCP, UDP, HTTP, DHCP, BOOTP and TFTP
    Web configuration and firmware update via Ethernet
    2 x digital input (Wet - volts supplied)
    2 x Relay, COM, NO - 250VAC 5A, 30VDC 5A
    Avoid inductive load to relay contacts
    With locked DI and 32-bit 3.5kHz counter
    With I/O pair - input is mirrored in the other's output
    Dual-watchdog with Power-on-safe value
    Supply voltage: 12 - 48VDC, 1.7 Watt
    Dimensions: 98 x 52 x 27 mm
    Operating temperature: -25 - +75°C

    Price 972.00 DKK
    Product code: ETH-MOD2I2R-I
    Physically in stock  
  • 3 x Power relay output COM,...

    3 x Power relay output COM, NO, 30VDC, 250VAC 5A, 8 x digital input, RS485 bus, 16bit counter, 10 - 30vdc

    I / O box with RS485 port for PC
    8 digital input channels and 3 relay output channels
    Form A Power relay output
    Sink & nbsp; and source type for digital input
    Digital input channels can be used as 16-bit counters
    Configurable Power-on value settings
    Configurable Safe Value Settings
    Dual Watchdog
    Wide operating temperature range: -25 ~ + 75 ° C

    Price 1,123.00 DKK
    Product code: M485-REL3-I
    On the way in