Network products / Wifi / PoE / RJ45-Fiber

2 channel duplex or four-channel simplex fiber optic bypass switch
Fiber Speeds 100 Gbps / 40 Gbps / 10 Gbps / 1 Gbps / 100 Mbps
Multimode with SC connector
Optical Bypass fallback switch
Supplyvoltage control fallback switching
Swiche-time under 8ms
1dB insertion loss (through-loss)
Very high reliability of critical network link
IP30 metal housing close
Supply voltage 9 ~ 48VDC or 24VAC, 0,6Watt
DIN -skinne and wall
Relay output for warning of power failure
Operating temperature: -40 to + 75 ° C
Industrial-grade design
Dimensions: 135 x 87 x 32 mm

Cyper Security VPN Router with dual WAN failover
Managed
10/100/1000Mbit
3 x RJ45 LAN
1 x RJ45 LAN / WAN
1 x WAN
1 x USB 3.0
Auto Reboot for 5 seconds
VPN tunnels: max 60
VPN throughput: max 100Mbps
Encryption: DES, 3DES, AES, AES-128/192/256
Authen: MD5 / SHA-1/256/384/512
IPSec (Host to Host) / GRE / PPTP server / L2TP / SSL
Operating temperature: -40 - + 75 ° C
Dimensions: 135 x 88 x 50 mm
Weight: 530g
Supply voltage: 9 - 48VDC, 9Watt
DIN bracket, wall mounting

4-port 10/100 / 1000BASE-T RJ45 with IEEE 802.3af / 802.3at PoE injector
1-port 10/100 / 1000BASE-T RJ45 WAN port or LAN port interface (router mode or switch mode )
1 x USB 3.0 port for backing up and restoring configuration file
PoE power is 36Watt per port - automatically Detect PD
PoE monitoring, status, strømbudg PoE port enable / disable, PD live check
IP30 metal housing, DIN bracket
Operating temperature: -10 - + 60 ° C
Supply voltage: 48V ~ 56V DC (PSU purchased)
Supports IEEE 802.1Q / D
Security: port filter, MAC filter, IP source protection, anti-DoS
LCD touch display - field management, maintenance etc.

Range up to 50 meters in line of sight
point to point, multipoint
signal: RX +, RX (TX +, TX-), GND
connectors: DB9 female 
Bluetooth version 2.0 + EDR
Frequency: 2.400 to 2.4835 GHz
Tx power: Max. 4dBm
Rx sensitivity: -96 dBm
Antenna: Rubber SMA female - external - 2dBi
Supply voltage: 5 to 40VDC, max. 17mA
Operating temperature: -40 to + 85 ° C
Dimensions: 87 mm x 34 mm x 18 mm. Antenna: 11 cm

Indoor Access Point, Gateway, Repeater, Super WDs
Ultra High Speed ​​AP With At the Atlictor Serving Users
Access Point, Gateway, Wisp, Repeater, Super Wds
Wave 2 Technology Increases the data amount to the individual User
Dual Band: 2.4GHz (300Mbps) / 5GHz (867Mbps)
High transmission power, adjustable
1 x RJ45 LAN with PoE + input
1 x RJ45 LAN
Supply voltage at non-PoE: 12VDC / 1.5A
Power Jack DC Input connector: 5.5 / 2.1 mm
2 x 2 5dbi built-in antennas
Transmission power: 100mW
Up to 50 users (Clients)
Dim: 186 x 186 X 36 mm
Operating temperature: 0 - + 40 ° C

Top Grade Managed Poe++ switch - for large scale network
Managed switch, 24 x RJ45 with PoE++ (95W) on all ports simultaneously.
PoE power budget of 2280Watt. No compromise
Double plug-in power supplies
24 x RJ45 10/100 / 1000Mbit with PoE++
PoE extended to 200meter
2 x 10GBase-T slot for 10Gbit / 1 Gbit SFP Module Single Mode or Multimode
2 x 10GBase-SR / LR SFP + slots (combo with 2 x SFP / RJ45)
Layer 3 managed switch - Professional Grade
multi cast support
ERPS to Ring IP monitoring - recovery time less than 10ms
DHCP relay / DHCP Server
Supports Cisco ether-channel (static trunk)
Dimensions: 440 x 300 x 44 mm (1U)
Weight: 5,5kg
Operating temperature: 0 - +50°C

16 x RJ45 10/100/1000Mbit with PoE+
2 x 10/100/1000Mbit RJ45
2 x Gbit SFP slot
IP-Stacking up to 6 units
Gigabit TP, SFP and 10G SFP+ interfaces
Hardware stacking up to 6 units
Switch series stacked in a logical unit
Stacking architecture supports redundant Ring mode
IPv4 IGMP/ IPv6 MLD snooping v1, v2 and v3
IPv6 MLD snooping v1, v2
MVR (Multicast VLAN Registration)
Ethernet Ring Protection Switching
Supply voltage: 12 - 48VDC, 24VAC Redundant
Dimensions: 152 x 107 x 66 mm
Weight: 829g
Operating temperature: -40 - +75°C
DIN bracket

24 x 10/100/1000Mbit RJ45
4 x RJ45 1000Mbit shared with Port-1 to Port 4
4 x 10Gbit BASE-SR / LR SFP+ slots SFP
IP Stacking up to 6 units
Gigabit TP SFP and 10G SFP + interfaces
Hardware stacking up to 6 units
Switch series stacked in a logical unit
Stacking architecture supports redundant Ring mode 
IPv4 IGMP / IPv6 MLD snooping v1, v2 and v3
MVR (Multicast VLAN registration)
Ethernet Ring Protection Switching
Supply voltage: 100 - 240VAC, 21Watt
Dimensions: 440 x 280 x 44 mm (1U)
Operating temperature: 0 - + 50 ° C
DIN bracket

DNV GL Certified marine network switch
Non-managed 5 port network switch approved to vessels
5 x 10 / 100Mbit Auto-MDI / MDIX
Supply voltage: 18 - 30VDC polarity
Surge, surge protector DC input
Throughput: 148,880 pps at 100Mbit
Dimensions: 110 x 74 x 24 mm
Weight: 145g
Operating temperature: -40 - + 75 ° C
Moisture: 10-90% RH ( no condensation)
DIN fittings, metal enclosure

Det Norske Veritas Certified marine network switch DNV GL
Non-managed 5 port network switch approved for ships
5 x 10 / 100/1000Mbit Auto-MDI / MDIX
Supply voltage: 9 - 48VDC, 4Watt, polarity protected 
Transient, surge protector DC input
Throughput: 1,488,000 pps at 1 Gigabit
Dimensions: 110 x 74 x 24 mm
Weight: 160g
Operating temperature: -40 - + 75°C
Humidity: 10 - 90% RH (non-condensing)
DIN fittings, metal enclosure

Det Norske Veritas Certified marine network switch DNV GL
Managed 8 port network switch approved for ships
8 x 10 / 100Mbit Auto-MDI / MDIX
2 x 100 / 1000Mbit SFP Single Mode or Multi Mode
Supply voltage: 12 - 60VDC, 12Watt
Polarity protection, over voltage protection at DC input
Dimensions: 162 x 123 x 50 mm
Weight: 780G
Operating temperature: -40 - +75°C
Humidity: 10 - 90% RH (non-condensing)
DIN fittings, metal enclosure

Det Norske Veritas Certified marine network switch DNV GL
Managed 8 port network switch approved for ships
8 x 10/100 / 1000Mbit Auto-MDI / MDIX to 4 x 1000Mbit SFP single mode or multimode
Supply voltage: 12 - 60VDC, 18Watt
Surge rotection, over voltage protection DC input
Dimensions: 162 x 122 x 50 mm
Weight: 860g
Operating temperature: -40 - +75°C
Humidity: 10 - 90% RH (non-condensing)
DIN fittings, metal enclosure

Network Extender of RJ45 UTP patch cable
PoE transmitted in the cable from the PSE to the PD
1 x 10 / 100Mbit BASE-TX RJ45
Data rate: 94 - 30Mbps auto-optimization
Auto -negotiation / auto-MDI / MDI-X
PoE Standard: IEEE 802.3at / PoE of
Output: 48-56VDC max. 38 Watt
1 x RJ45 to VDSL + PoE
PoE pin: Pin 1/3/5/7 (+ ) 2/4/6/8 (-)
Distance: 100m m / PoE +, 500m w / PoE, without PoE 1000m
Powered by the 48-56VDC min. 2Amp

300Mbps AP, Gateway, Repeater, WDS, WISP
2T2R architecture with dual-polarization 14dBi antennas built
Transmission power: 100mW
10 / 100Mbps RJ45 Kirke pipe-mounting and wall mounting
supports WAN connection for DHCP, Static IP, PPPoE
IP55
Power supply: 48VDC 0.5A (802.3at PoE +) or 12VDC 1A (via DC jack)
Operating temperature: -20 - + 70 ° C
OUTLET - OLD MODEL

AT Commands Communication
Bandwidth 1.4/3/5/10/15/20MHz
LTE-FDD：B1/B3/B7/B8/B20/B28A
WCDMA：B1/B8
GSM：B3/B8
Input DC 8V-28V
working temperature -30℃-70℃
Dimensions 82 × 84 × 24mm
Max upstream rate 50Mbps
Max downstream rate 150Mbps
RS485/RS232

4-port 10/100 / 1000BASE-T RJ45 with IEEE 802.3af / 802.3at PoE injector
1-port 10/100 / 1000BASE-T RJ45 WAN port or LAN port interface (router mode or switch mode )
1 x USB 3.0 port for backing up and restoring configuration file
PoE power is 36Watt per port - automatically Detect PD
PoE monitoring, status, strømbudg PoE port enable / disable, PD live check
IP30 metal housing, DIN bracket
Dimensions: 180 x 140 x 25 mm | Operating temperature: -10 - + 60 ° C
Supply voltage: 48V ~ 56V DC (PSU purchased)
Supports IEEE 802.1Q / D
Security: port filter, MAC filter, IP source protection, anti-DoS

Wifi CAN converter. CAN CAN bridge. CAN PC
two CAN channels
AP mode and station mode
Compatible with Socket (TCP Server, TCP Client, UDP)
Support: Ethernet, ARP, IP, ICMP, UDP, DHCP, DNS TCP)
DIP switch for terminating
Isolation: 1500VDC
CAN baud rate: 5kbit / s to 1Mbit / s
Wifi: 2.4GHz IEEE802.11a / b / g
Supply voltage: 9 - 30VDC
Consumption: 80mA @ 24VDC
Dimensions: 118 x 94 x 23 mm
Operating temperature: -40 - + 85 ° C

CAN Bus to USB Tester
Interface: Open 6
2 x CAN Channels
CAN Standard: ISO 11898, Can 2.0a, Can2.0b
CAN Baudrate: 5K - 1Mbps and most widely used Baud Rate
Isolation: 1500V
USB: 1.1, 2.0
Support Software: _CAN Tools, CAN Test, CAN Pro.
Operating System: Windows 2000 / XP / 2003/7/8/10
Supports VC, VB, C #, LabVIEW, LabWindows, Delphi7 OA
Operating temperature: -40 - + 85 ℃
Measure: 103 x 64 x 23 mm

IP67 and IK10 Gbit PoE injector for outdoor mounting
PoE++ (60W) injector for PoE equipment
1 x RJ45 port for PoE++ out Data+PoE
1 x RJ45 port Data in
1 x Phoenix connector for the input voltage
DC24V 72W input
DC36V 71W input
DC54V 66W input
PoE standard: IEEE 802.3at/bt (PoE++)
PoE out Mid-span / End-span
Operating temperature: -40 - +75°C
Wall bracket
Dimensions: 170 x 73 x 44 mm
Weight: 425

Gigabit PoE splitter for indoor mounting
PoE++ (60W) Splitter with optional DC output to non-PoE equipment
DC output: 12VDC / 5A or 19VDC / 3.2A or 24VDC / 2.5A
1 x RJ45 port to PoE++ in from Switch or PoE injector
1 x RJ45 port (data) to non-PoE equipment
1 x DC Jack connector (5.5 / 2.5mm) for equipment
POE Standard: IEEE 802.3 at / bt (PoE++)
IEEE 802.3at (PoE+ Mid-Span)
IEEE 802-3bt (PoE++ Poh HDbaset)
Operating temperature: 0 - +50°C
Wall bracket
Size: 94 x 70 x 39 mm
Weight: 265g

Waterproof Outdoor PoE+ Injector 30Watt
1 x RJ45 Data
1 x RJ45 Data and PoE+
1 x 2-pin DC Phoenix connectors
IK10 Vandal safe
Supply voltage: 24 - 56VDC
POE Standard: IEEE 802.3 at / af
End-Span
Pin: (+ 1.2) (- 3.6)
Operating temperature: -40 - +75°C
wall mounting
Size: 170 x 73 x 44 mm
Weight: 340g

PoE surge protection for 10/100/1000Mbit networks
Supports PoE voltage 48VDC / 40Watt
Nominal discharge: 2.5kA, max. 5kA (8/20myS)
Response time: less than 1ns (nano-second)
Transmission loss: below 0.2dB
2 x RJ45 female (in / out)
Protected pin: 4/5, 7/8 (power supply + data), 1 - 8 (data)
Operating temperature: -40 - +70°C
Humidity: less than 90% rh
Dimensions: 93 x 55 x 35 mm
Weight: 73g
DIN bracket
Ground cable of more than 2.5kv must be shorter than 1 meter
Ground cable thickness: Min. 2.5 sq.mm
Ground resistance must be less than 4 ohms
Nothing can protect against a direct lightning strike

Surge Protection for 10/100 / 1000Mbit network
Review voltage: 5V / 300mA
review loss: Less than 0.2dB
2 x RJ45 female (in / out)
Protected Pin: 1 - 8 (data)
Threshold at 15V
Max Transient current: 5 - 15k Amp
Operating temperature: -40 - +70°C
Moisture: less than 90% RH
Size: 112 x 38 x 30 mm
Weight: 150g
Earth cable of more than 2.5kvmm must be shorter than 1 meter
Earth resistance must be less than 4 ohms
Nothing can protect against a direct lightning strike

WiFi antenna for 2.4GHz and 5GHz
50 Ohms, 50 Watts
Vertical radiation: 20 degrees
Horizontal radiation: 360 degrees
Bandwidth: 100/950MHz
Dimensions: ∅19 x 495 mm
Both for indoor and outdoor use
Operating temperature -40° - +85°C
Can be mounted directly on the AP-female connector

Gigabit PoE and data Extender PoE splitter
1 x RJ45 Data + PoE ++ input
2 x RJ45 Data + PoE + outputs
Standard: IEEE 802.3bt and 802.3at
from injector to Extender up to 100 meters
from Extender to PD Devices Up to 100 meters
IP67 Aluminum Molded cabinet
Temperature range: -40 - + 75 ° C
Plug Play
Wall fittings
Size: 170 X 44 x 73 mm with cable gland

Passive PoE / POC injector for all voltages
Max. Power is 1amp
Voltage up to 48VDC
for UTP and STP Patch Cables
PoE Out: + on Pin 4, 5. - On Pin 7, 8
100Mbit Pin 1, 2, 3, 6
Plastic cabinet
Dim: 75 x 28 x 22 mm

Outdoor robust Dual Band Access Point etc..
AP, Gateway, Repeater, WDS, Wisp
2.4GHz and 5GHz, 300 / 867Mbit (1200Mbit)
Max. 8 SSID (4 per radio), 64 clients
1 x RJ45 Gigabit Port PoE PD
IEEE 802.11ac 2T2R - Wave 2
Up to 20dBm (EIRP)
4 x N-hona plug
IP67 Diecast aluminum cabinet for mast mounting
Operating temperature: -40 - + 70 ° C
Real-time WiFi channel Analyzer
Dim: 295 x 231 x 80 mm
Weight: 2.3kg
supply : PoE, 48V / 0.5a (PoE+)

4G LTE gateway to old analog telephone
also for Dect Wireless phone with analogue Base
1 x SIM card slot (full size)
2 x RJ11 Connector for 2 phone appliances
Power supply: DC 5V -12V 0.5W (power supply included)
Operating temperature: -10 ~ + 40 ℃
Dimensions: 120 x 85 x 28 mm
exclusive mobile subscription and SIM card

Converting cable from CRC9 to N
Suitable for connection of external antenna for router
RG174, 50 Ohm
100dB per 100meter at 2GHz
CRC9 male
N male
2 meters

Converting cable from CRC9 to N
Suitable for connection of external antenna for router
RG174, 50 Ohm
100dB per 100meter at 2GHz
CRC9 male
N male
5 meter

Managed 10/100/1000Mbit Robust Industrial Switch
Vibration Safe and dust proof
M12 5 Pin Coded connector
with automatic Bypass for next switch if failure
IEEE 1588v2 Precision Time Protocol (PTP)
PTP is time synchronization in infrastructure
Modbus TCP/IP to SCADA
SMTP / SNMP Trap - generates Email Alarm
IGMP and MLD Snooping for Multicast
VLAN Routing (Layer 3)
CyperSecurity Minimizes safety risk / attacks
Redundant Ring, Fast Recovery
Supply voltage: 9 - 48VDC Redundant Input
Dim: 245 x 140 x 25 mm
Operating temperature: -40 - +75°C
DIN bracket , wall bracket
Weight: 1kg

POE power supply via Ethernet cable, up to 30 watt
LAN without PoE in, gives LAN with PoE out
Poe +, 56VDC / 30W
10/100/1000Mbit network.
Power supplies from 12 -48VDC / 32W Max
Redundant Power Input via Terminal Block
Power supply not included
Dim: 135 x 87 x 32 mm
Operating temperature: -40 ~ +75°C

Managed Poe+ Switch with 48 x RJ45 and 4 x SFP + slot
48 x RJ45 10/100/1000Mbit with PoE+
Up to 36 watts per port - max. Total 400W / 720W
720watt at both 230VAC and 56VDC Input
4 x SFP + slot for 1Gbit / 2.5Gbit and 10Gbit SFP Fiber modules
Redundant Ring, Fast Recovery
Layer 3 VLAN routing
Internal temperature control
IGMP Snooping, Spanning Tree Protocol
MLD Snooping (IPv6)
Management, SNMP, DHCP Server, SMTP
Redundant Voltage Supply Input
Dim: 440 x 300 x 45 mm (1U)
Weight: 5kg
Operating temperature: 0 - +50°C
Supply voltage: 100 - 250VAC, 36 - 60VDC

LTE Panel antenna, indoor/outdoor
2 x N-female connector
35° horizontal and 32° vertical radiation
IP67
Temperature: -20° ~ +75°C
Impedance, 50 ohms
Max power: 50 Watt
Frequency band: 698-806MHz / 824-894MHz / 925-960MHz / 1710-1885MHz / 1920-1980MHz / 2110-2170MHz / 2500-2690MHz
Dimensions: 473 x 252 mm
Weight: 1.4kg
Mast bracket included

2.5Gbit SFP optical transceiver multi mode
Mini GBIC - Small form Factor
LC Multi mode fiber cables (62.5my and 50my)
Estimated range is 300 meters
wavelength: 850nm

2.5Gbit SFP optical transceiver Single Mode
Mini GBIC - Small Factor
LC Single Mode fiber cables (9 my)
Estimated range is 20 km
Wavelength: 1310 nm

2.5Gbit single core WDM optisk transceiver
Single Mode Wavelength-Division-Multiplexing
Mini GBIC - small form factor
Til simplex fiber (enkelt core) med LC stik
Estimeret rækkevidde er 20km
Driftstemperatur: -40 - +70°C
Tilkøb modpart som monteres i anden ende af fibren
CNV-SFP2.5G-WDM-B 

1800 Mbit/s Access Point, Gateway, Repeater, WPA3, Dual Band, Wall / Ceiling Mounting
Support 802.1Q VLAN and SSID for VLAN Mapping
Ofdma (Orthogonal Frequency Division Multiple Access)
Support WiFi Multimedia (WMM), IGMP
Seamless Roaming
2.4GHz (600Mbps) and 5GHz (1200Mbps)
High transmission power, adjustable
4 built-in 5 dBi antennas
8 x SSID, up to 250 Clients
1 x RJ45 with PoE + input
1 x RJ45 LAN
supply voltage at non-PoE: 12VDC / 2A (5.5 / 2.1mm)
Dim: 186 x 186 x 36 mm
Operating temperature : 0 - +55°C

Managed switch with 48 x RJ45 and 4 x SFP+ slots
​Layer 2 switch
48 x RJ45 10/100/1000Mbit
4 x SFP+ slot for 10Gbit SFP fiber modules
Redundant Ring, Fast Recovery
IGMP Snooping, Spanning Tree Protocol
Fan with speed control
Dimensions: 440 x 330 x 44 mm (1U)
Weight: 4kg
Operating temperature: 0 - +50°C
Supply voltage: 100 - 250VAC

PoE 802.3 at/af type a/b and non-standard PoE 5~60V
Measurement of cable length (2.5 ~ 200m). Accuracy: ±1.6m
Continuity test: Shows diagram of the conductors in the cable. Range: 600m
With special flash sequence, switch port can be identified
Can show speed on switch port.
Can show auto negotiate on switch.
Scan: Sends a tone over the cable that can be intercepted. Makes it easy to find the right cable, among other cables.
Battery: 3 x AAA, 1 x 9V (not included)

Outdoor 4G router with Wifi
802.11b/g/n/ac dual band 2.4 / 5GHz WPA2
AP, Client, Station, Bridge Mode Support
VPN: IPSec, PPTP / L2TP, GRE, OpenVPN
Cat 4 LTE - UL: 150Mbps, DL: 50Mbps
IP67
Power Supply: 12VDC 1.5A PoC (adapter included)
PoC is power over Cable (network cable)
2 x N type male to 4G (antennas included)
2 x N type male to WiFi (antennas included)
Mounting kit for pole

Outdoor 4G router with Wifi
802.11b/g/n/ac dual band 2.4 / 5GHz WPA2
AP, Client, Station, Bridge Mode Support
VPN: IPSec, PPTP / L2TP, GRE, OpenVPN
Cat 6 LTE - UL: 300Mbps, DL: 50Mbps
IP67
Power Supply: 12VDC 1.5A PoC (adapter included)
PoC is power over Cable (network cable)
2 x N type male to 4G (antennas included)
2 x N type male to WiFi (antennas included)
Mounting kit for Pole

Outdoor 4G router with Wifi
802.11b/g/n/ac dual band 2.4 / 5GHz WPA2
AP, Client, Station, Bridge Mode Support
VPN: IPSec, PPTP / L2TP, GRE, OpenVPN
Cat 12 LTE - UL: 600Mbps, DL: 150Mbps
IP67
Power Supply: 12VDC 1.5A PoC (adapter included)
PoC is power over Cable (network cable)
2 x N type male to 4G (antennas included)
2 x N type male to WiFi (antennas included)
Mounting kit for Pole

Surge Protection to Gigabit network
Max. Working voltage on line: 48V
2KV Impulse protection (10/700 Micro sec)
Loss Factor: 0.2dB
Dim: 112 x 38 x 30 mm

Insulator for up to 80mbit network speed
1 Port
1 x RJ45 female
1 pc ½meter cable with RJ45 male
12kv isolation voltage.
Unable to transfer PoE

7 DBI outdoor Omni antenna with N-type female socket
Horizontal: 360 degrees
Vertical: 9 degrees at ½ power
700-900 / 1800-2170 / 2300-2690MHz
Length is 76cm
n She connector
for mounting on pipes
for mounting on wall
Wind resistant Over 250km / h
Weight: 400g
Max. Effect: 50W
Impredance: 50 Ohm
mounting brackets included
glass fiber, copper inside, stainless steel Feature

Wifi AP, Client, Bridge, Repeater, Router
Industrial 2 x 2 Mimo
Qualcomm Atheros QCA9892
Supports IEEE 802.11 A / B / G / G / N / AC
2 x 10 / 100Base -Tx Wan / Lan-Port
TX Power 21 db to 2.4 GHz
TX Power 18 BB for 5GHz
WPA, WPA2, WPA3, WEP, TKIP, AES
Supply voltage: 9 ~ 48VDC In the 4-pin terminal block
protection against reverse polarity
IP30 protection
DIN rail or wall mountable
Operating temperature: 0 ° to 60 ° C
Dim: 162 x 110 x 46 mm

Unmanaged Switch
2 x RJ45 port 10/100/1000Mbit
2 x 100/1000X SFP-port
Samlet PoE effektbudget: 120W
2x60W PoE ELLER 1x90W PoE+1x30W
PoE standart: IEEE 802.3bt
IP67, IK10
Driftstemperatur: -40°C ~ 65°C
Option: PoH 100W / Managed

Unmanaged Switch
4 x RJ45 PoE++ port 10/100/1000Mbit
2 x 100/1000X SFP-port
Samlet PoE effektbudget: 250W
4x60W PoE ELLER 2x90W PoE+2x30W
PoE standart: IEEE 802.3bt
IP67, IK10
Driftstemperatur: -40°C ~ 65°C
Option: PoH 100W / Managed

IP67 sealed media converter, ideal for Camcorder, AP etc.
1 port 1000Mbit fiber SFP slot
SFP slot for Single Mode or Multi Mode optical transceiver
1 port 100/100/1000Mbit RJ45
Autodetection of PD equipment (devices that must be powered by PoE)
PoE+ out: 30Watt
End-span: + on 1/2, - on 3/6
IK10 rated for vandal protection
6kV ESD protection
Supply voltage: 24 - 56VDC (Terminal block)
Temperature range: -40 - +75°C
Plug and Play
Dimensions: 170 x 44 x 73 mm
Wall mounting

Cooling fan for 5VDC 0.25A
40 x 40 x 10 mm
3-pin cable
5000 rpm

Demo Item - Without Packaging or Accessories
Korenix Jetnet 5010g
7 x 10/100 RJ45 Ethernet
3 x 10/100/1000 RJ45 Ethernet / SFP Combo Ports (10/100 / 1000 Base- T, 100 base-eg, 1000 base-x)
supply voltage: 10.5 ~ 60 VDC
Operating temperature: -25 ~ 70 ° C

Managed 8 + 2 Ports Gigabit PoE+ Switch
4 x RJ45 ports are up to 2.5Gbps with PoE++ (95W)
4 x RJ45 ports are up to 1Gbps with PoE+ (36W)
PoE Power Budget Is 240 Watts
with PoE insulation
2 x SFP slot for 1G, 2.5G and 10Gbit SFP module
RJ45 type RS232 console interface for switch control
up to 95W to 802.3BT / POH units
Detects automatic PoE Suitable devices (PD)
IGMP Snooping
Link Aggregation
Cyper Security
PoE Up to 100 meters
Dim: 330 x 200 x 45 mm
Supply voltage: 100 - 240vac

Outdoor Robust Dual Band Access Point etc.
AP, Gateway, Repeater, WDS, Wisp
2.4GHz and 5GHz, 600 / 1200Mbit (1800Mbit)
Max. 8 SSID (4 per radio), 150 (100) Clients
1 x RJ45 Gigabit Port PoE+ PD
IEEE 802.11ac 2T2R - Wave 2
Up to 20dBm (EIRP)
4 x N-female connector
IP67 Molded aluminum cabinet for mast mounting
Operating temperature: -40 - +70°C
real-time WiFi channel Analyzer
Dim: 295 x 231 x 80 mm
Weight: 2.5kg
Supply: POE, 48V / 0.5A (PoE+)

Wireless Com Port - Can Peer-to-Peer connection
IEEE 802.11 a/b/g/n
2.4 GHz, 5 GHz Dual Band
1 Port RS232 or RS422 or 2-wire RS485
Max.Baud Rate: 921.6 Kbps
Operating temperature: -40 - +85°C
with COM Port Re-Director, TestView
± 15KV IEC ESD protection
Supply voltage: 5 - 12VDC / 2W
infrastructure, Soft AP, Roaming
sWifi config Mobile App for Android

LoRaWan transceiver with 2 x digital inputs
LoRaWan transceiver with 2 x analog inputs 4-20mA / 0-10V
LoRaWan transceiver with relay output (SPDT)
Supports LoRa Class C protocol
Serial port: RS232 or RS485 (Transparent data)
Collect data sent to Lora-Gateway Controller
Frequency: 868MHz - Range Up to 10 km
Configuration Port: Micro USB
Operating temperature: -40 - +70°C
Supply voltage: 5 - 24VDC
Dim: 120 x 120 x 56 mm

LoRaWan transceiver with digital inputs
LoRaWan transceiver with relay output (SPDT)
Supporter LoRa Class C Protocol
Serial Port: RS232 or RS485 (Transparent data)
Collects data to be transmitted to LoRa-Gateway Controller
Frequency: 868MHz - Range Up to 10 km
1 x Antenna 2dBi - SMA male connector
Configuration Port: Micro USB
Operating temperature: -40 - +70°C
Supply voltage: 5 - 24VDC
Dim: 79 x 60 x 24 mm

LoRaWan with stable connection to IoT units
4 x 10/100 / 1000Base-T RJ45 LAN ports
1 x 10/100 / 1000Base-T RJ45 WAN port
1 x LoRa antenna - 2DBI with SMA male
1 x Serial console Port (RS485)
2 x DI / DO and 1 serial port (RS485) for Modbus applications
For EU 868MHz (SUB 1G) Frequency
8 Programmable parallel demodulation paths
static IP / PPPoE / DHCP client for WAN
DHCP server / NTP client for LAN
Protocols: TCP / IP, UDP, ARP, IPv4, IPv6
port forwarding; Qos; DMZ; IGMP; UPnP; SNMPv1, V2C, V3
Dim: 135 x 135 x 50 mm

LoRaWan with stable connection to IoT units
Dual Band WiFi - 2 antennas with RSMA male
3 x 10/100/1000Base-T RJ45 LAN ports
1 x 10/100/1000Base-T RJ45 Wan-Port
1 x LoRa Antenne - 2DBI with SMA male
2 x DI / DO and 1 serial port (RS485) for Modbus applications
to EU 868MHz (SUB 1G) Frequency
8 Programmable Parallel Demodulation Roads
Static IP / PPPoE / DHCP Client for WAN
DHCP Server / NTP Client for LAN
Protocols: TCP / IP, UDP, ARP, IPv4, IPv6
port forwarding; Qos; DMZ; IGMP; UPnP; SNMPv1, V2C, V3
Dim: 135 x 135 x 50 mm

Top class media converts. Up to 2.6Gbit Fiber SFP
Full Managed with Many Features
RJ45 10/100/1000Mbit
Modbus TCP - Real Time Monitoring
IEEE1588v2 - Precision Time Protocol - Transparent Time
IEEE 802.1 Spank Tree Protocol
Port Mirroring - More to a
Loop Protection - Avoid Broadcast Loop
Supports Igmp Snooping
IP Sourcs Guard - Protects against Spoofing
SMTP, Sylog, Trap
with LFP and LLCF - Link Forward Carry Through.
Supply Voltage: 9 - 48VDC, 24VAC
Operating temperature: -40 - +75°C
DIN bracket
SFP module and power supply is to be purchased

Top class media converter with 2 fiber ports and 2 RJ45 ports
for redundant network or as Node in networks
suitable where Single Mode must be connected to Multi Mode
full managed with many features
RJ45 10/100/1000Mbit
Modbus TCP - Real Time Monitoring
IEEE1588V2 - Precision Time Protocol - Transparent Time
IEEE 802.1 Spanking Tree Protocol
Port Mirroring - more to one
Loop Protection - Avoid Broadcast Loop
Supports IGMP Snooping
IP Source Guard - Protects against Spoofing
SMTP, Sylog, Trap
with LFP and LLCF - Link Forward Carry Through.
Supply voltage: 9 - 48VDC, 24VAC
Operating temperature: -40 - + 75 ° C
DIN bracket
SFP modules and power supply are to be purchased

Antenna adapter
exterior thread + hole (N type)
exterior thread + pin (RP-TNC)
Impedance: 50 ohm

Compact design
Output 54VDC vlotage for PoE device use
Space for PoE switch / PoE Surge protector installation
IP66 rated
Include Thermal Switch control heater and blower
Include fiber panel for fiber cable connection
Battery protection for deep discharge and short circuit
Space for 12V/7Ah Battery x 4PCS

Modular design for easy replacement
Supports 10M/100M/1G/2.5Gbps Ethernet
Supports 802.3af / 802.3at / 802.3bt / UPoE
Protects 8 wires of network cable, including PoE
Protects Up to 20KV / 10KA wave
Error indicator LED
Operating temperature from -40°C to 85°C
DIN rail mounting

4x 30W 56VDC IEEE802.3at PoE port
1x 56/24VDC PoE port
1x SFP Port
2x 48-56VDC Indgang
Driftstemperatur -40°C - 75°C
10/100/1000Mbps Data Rates
Total Power Budget 120W

2 Ports Poe Injector provides 2 x 36Watt for PD equipment
10/100/1000 Mbit
pin 4/5 (+), pin 7/8 (-)
4 x RJ45 (2 with data and 2 with data + PoE for equipment)
supply voltage: 12 - 56VDC
Power Budget is 60 - 72 Watt
Dim: 105 x 70 x 30 watts
Weight: 280g
Operating temperature: -40 - + 75 ° C
DIN mounting

2.5 Gigabit Ethernet adapter for USB3.0
RJ45 female and USB 3.0 male (Type A)
Full-duplex 10/100/1000/2500 Mbit / s
Supplied via USB port
OS support: Windows Vista / 7 / 8.1 / 10/11 and Macintosh OSX 10.6 / 10.7
Colour Black
5 cm cable
Note: Requires specific driver version. See Downloads

2.5 Gigabit Ethernet adapter for USB3.0
RJ45 female and USB 3.0 male (Type C)
Full-duplex 10/100/1000/2500 Mbit / s
Supplied via USB port
OS support: Windows Vista / 7 / 8.1 / 10/11 and Macintosh OSX 10.6 / 10.7
Colour Black
5 cm cable
Note: Requires specific driver version. See Downloads

Gigabit PoE and Data Extender / splitter
1 x RJ45 data + PoE + input
2 x RJ45 data + PoE + outputs
Standard: IEEE 802.3af and 802.3at
From Injector to Extender up to 100 meters
From Extender out to PD devices up to 100 meters
Wall mounting
Plug & Play
Temperature range: 0- + 50 ° C
Dimensions: 140 x 77 x 28 mm
Weight: 234g

8 ports Unmanaged Desktop Switch 10/100.
Plug and play.
Efficient, silent switch in compact version.
Plastic chassis.
Supply voltage: 5VDC / 0.55A mains adapter included
Dimensions: 85mm x 135mm x 60mm

Flexible modular configuration, 3 Module-dedicated slots
Up to 20 possible configurations in 4 power input versions
Up to 24 PoE ports, with maximum 720W of PoE power budget
4 x 1 Gigabit or 4 x 10 Gigabit SFP Uplink slots
RIPv1/v2, OSPFv2, IPv4 Static Routing, and Multicast IP routing
ITU-T G.8032 ERPS Ring, RSTP, MRP (client) and VRRP redundancy
Dedicated MACsec modules available for additional ultra-low-latency, high-throughput strong security
Rugged industrial design for -40° ~ +75°C harsh environment operation
PROFINET v2.33 CC-B conformance
EN50155 and EN50121-4 certified for Railway and Trackside applications

Media Converter for 10Gbit Fiber
1 x RJ45 10Gbit/5Gbit/2.5Gbit/1Gbit/100Mbit Base-T
1 x 10GBase-X SFP+ Slot
For 50/125my and 62.5/125my, Single Mode or Multi Mode
SFP Module is by default for LC connectors, Duplex, Single Mode / Multi Mode.
Purchase SFP Module
Supply voltage: 5VDC
Power supply included
Operating temperature 0 to +50°C
Dimensions: 94 x 70 x 26 mm

Managed Gigabit switch 2 x RJ45, 2 x Fiber
4 x RJ45 10/100/1000Mbps
2 x SFP 100/1000Mbps
Support ERPS (Ring protection) 
IGMP/MLD Snooping (IPv4, IPv6)
Up to 256 VLAN groups
Support Cisco ether-channel (Static Trunk)
Port mirroring - up to 4 sessions
Supply voltage: 9 - 48VDC, 24VAC
Size: 135 x 88 x 32 mm
Temperature: -40 to +75°C
DIN-mounting

2.4GHz, 300Mbps AP, Gateway, Repeater, Bridge, WISP
802.11 b/g/n
Includes 2 pcs. 8dBi antennas
2 x N female
Transmission power: max. 500mW
1 x 10/100Mbps RJ45
For pipe mounting and wall mounting
WPA/WPA2, WPA-PSK
IP65
Power supply: PoC or PoE+ 48VDC (injector included)
Pin 4/5 +, 7/8 - PoE input.
Operating temperature: -20 - +70°C
Dimensions: 880 x 200 x 80mm
Weight 1.7kg