El-magnets / Electronic locks / Alarms / Access Systems

Ethernet/Wiegand konverter

Access control with RFID and Iris scanner

Syge og ældre alarm til WA-BASE+

Door switch for access controls - EXIT button.
make contact by pressing
Contact: NO / COM
Max. 36VDC 3Amp
cast aluminum, steel button
Operating temperature -20 - + 50 ° C
Dimensions: 83 x 32 x 25 mm | Weight: 135g

Door status Red / green LED light indicator. 12 / 24VDC /1.2Watt.

Wireless infrared outdoor PIR motion sensor
External antenna
Adjustable range sensor 10-35m / 750 sqm
Battery operated 2 x AAA 1.5 volt
Operating temperature -20 to + 55 °
IP55 close to 150 meters line-of-sight
For wall mounting (fittings included)
The system does not work without reciever PIR-WL-R

Modtager/ styreenhed til trådløst PIR system
Håndterer 1-3 sensorer/ detektorer
Forsynes via 12V dc 35mA
Driftstemperatur -20 til +55°
IP65 tæt til udendørs brug
Frekvens 433 MHz - rækkevidde 150m
Til vægmontering
Virker ikke uden PIR sensor PIR-WL35

BEMÆRK: Kontrakt med DANBIT A/S og Brugeraftale med serviceleverandør SKAL etableres før køb!

Betalingssystem med touch display.
All-in-one med POS og Data-kommunikation i samme hus
Accepterer kontaktløse kort og MobilePay.
GSM antennestik MMCX stik
6 digitale OC. pulsudgange til automat/vendingmaskine, maskiner, døre etc.
6 digitale indgange, inhibit, for at stoppe køb ved mangel/fejl
Konfigureres via platform med priser og funktioner
Kan tilkobles en salgsautomat, vaskemaskine, dør, osv
Web-baseret eller MQTT Cloud
Kommunikation: LAN eller 4G
Support til opsætning kan tilkøbes.
Leveres med SIM kort klar til funktioneopsætning
Forsyningsspænding: 10-24VDC, 10-42VAC / 2A (PSU medfølger ikke)

Infrared light barrier
Up to 7 meters between the IR emitter and reflector
transmitter is powered. Passive round reflective piece
Power supply: 12-24 V DC / AC (not included)
Relay: max 36V 1A
Terminal: DC input Relay output: COM, NO (normally open contact)
Temperature: -20 ~ +60°C
Dimensions: 40 x 35 x 100 mm (W x D x H)

Angled bracket for the door-magnet-yx35 types.
for attaching the holdemagnet.
1 part of extruded aluminum
Screws included
Dim: 265 x 73 x 45 mm
anodized

Local forvarslingslarm to use the fx olietank

omvandlare

Projektørlamper til oplysning til brug af video overvågning

Accessories DOOR-MAGNET-MI
bracket for mounting on the side of the frame
Strong aluminum profile
Dim: 170 x 37 x 30 mm

Face creation with RFID and fingerprint reader
Advanced fake finger detection
Touch Keypad and Voice Over IP Doorphone
Max Users: 250,000 (Finger) / 10,000 (face)
Up to 10 million logs And up to 20,000 photos
Resolution: 500 dpi
RFID: 125kHz Em, 13.56MHz Mifare, HID prox
supplied via POE or 12VDC
Dimensions: 149.5 x 207.8 x 45.5 mm
Operating temperature: -20 - + 60 ℃
Technical demanding product - Support hours can be purchased

Miniature Electronic holding magnet for cabinets and closets
Supply Voltage 12 VDC, 140mA minimum
Holding force up to 36 KG
Operating temperature: -10 ~ 55C
IP65 close Stainless steel with epoxy filler
magnet dimensions: 70 x 38 x 26 mm
Counter-plate dimensions: 80 x 32 x 18.5 mm
Weight of 350 g

MDB Male and Female
EXT-MCR
TEMP
GND
DOOR OPEN
DEX Male and Female
RS232

Tilbehøt to DOOR-MAGNET-MINI
bracket for mounting the door magnet on the side of the frame
Strong Aluminum

Rev: LO

Accessories DOOR-MAGNET-LOCK
bracket for mounting to the inward door (inswing)
Set consists of three parts
Strong aluminum profiles.
Good adjustability

Accessories for Door-Magnet-V12
Mounting the Hold Magnet on side of Karm
mounting door plate If this is necessary
for outward door (outswing)
Heavy Aluminum profile
Dim: L 220 x D 70 x B 45 mm

Electric lock box for single / double acting swing doors
Smal frames - 25 mm Front plate
Brushed stainless steel
272 kg Pressure strength
Latch Status Output: 1A / 125VAC
Supply voltage: 12VDC 280MA / 24VDC 180MA
Operating voltage: 12 - 24VAC / DC
Operating cycle: 250,000 (factory tested)
Size: 24 x 160 mm House, 25 x 210 mm Front plate 
Pole plate: 28 x 210 x 2 mm

Z Fittings for DOOR-MAGNET-V8
for inward door
consists of 3 parts
Extruded aluminum

Lokal forvarslingslarm til brug til fx olietank med SMS og e-mail

Bolt lock for frame, locked with tension,
holding force 1000 KG
Built-in time control and reporting contact
12VDC 900 / 150mA start / operating current
Time delay: 0.3.6.9 sec.
CE & amp; MA Certified
Dimensions: 34 x 38 mm

Residual sale

USB connection
Demoprogram included
API included.
OS up to and with Vista

door magnet with clamping force up to 545kg
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, 0.5A / 0,25A
No holding power at any voltage
Operating temperature: -10 to + 55°C
Magnetic: 267 x 68 x 40 mm
Door-plate: 185 x 61 x 16 mm
Mounting plate for the frame: 267 x 40 x 8 mm
Anti-magnetic feature
Weight : 4,9kg

Pneumatisk pullert uden styring til vejspærring/ tyverisikring.
Til udendørs brug
Rustfrit stål
90 cm høj, diameter: 16,8cm
103 Kg
LED indikering
Tyverisikret

OBS: kræver styring

Electronic lock
DC 12V up, 0.8A
Metal
Cable length 36cm
Weight: 155g

MDB Male and Female
DEX Male and Female

The door magnet with holding force up to 136 kg
stainless steel housing full sealed with epoxy
Voltage for holding: 12VDC 6 Watt
No holding force at voltageless
Operating temperature: -10 to +55°C
Magnet: 170 x 32 x 24 mm
Amaturple plate: 152 x 32 x 10 mm
Anti magnetic function
Weight: Approx. 2.5 kg

door magnet with clamping force up to 545kg
Rusrfri steel cabinet full sealed with epoxy and is vandal proof
Equipped with thread for flexible tube to protect the cable
Supply voltage for team: 12VDC or 24VDC, 6Watt
Cable change-over between 12 and 24 VDC
Only holding force when energized
With Bond Sensor (Lock indicator)
Operating temperature: -10 to + 55°C
Magnetic: 220 x 62 x 41 mm
Door-plate: 185 x 61 x 16 mm
Anti-magnetic feature
Weight: ca. 5 kg

IR safety sensor for automatic doors prevent property damage and personal injury
Mounted above the frame or on the door
Relay output connected dørautomatikstyringen
Length: 360 mm | IR beam adjustment: 5-25 °
6 measuring points
detector distance: 0 to 2.5 meters
Max. installation height: 2.6 meters
Relay Output is continuously active when the thing or person is detected
Dimensions: 360 x 45 x 45 mm
Weight: 350g
Supply voltage: 12 - 24VDC or 12 - 24VAC
IP54
EU standard: EN16005

Accessories for door-magnet-mi
z-angle brackets for inward door (Inswing)
The kit consists of 3 parts
heavy aluminum profiles
target: See drawing

Accessories for DOOR-MAGNET-LOCK6
The kit consists of 3 parts
heavy aluminum profiles
target: See drawing

Accessories for DOOR-MAGNET-LOCK
angle fittings for outward door (outswing)
The kit consists of 1 part
heavy aluminum profile
Dim: See drawing

Accessories for DOOR-MAGNET-MI
angle fittings for outward door (outswing)
The kit consists of 1 part
heavy aluminum profile
Dim: See drawing

Electronic door magnet for double doors, swing doors etc.
Holding force up to 272 kg for each door
Aluminum housing and vandal-proof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6Watt
Switching between 12 and 24VDC
No holding power when de-energized
With Bond sensor (door closed sensor)
Option: Door status sensor, Re-lock timer
Operating temperature: -10 - 55°C
Double magnet: 500 x 44 x 26 mm
Door panels: 185 x 38 x 12 mm
Double mounting plate: 500 x 26 x 5.5 mm
Weight: approx. 5 kg
Additional access system - see Accessories

The door magnet with holding force up to 363 kg
Rust free steel cabinet full sealed with epoxy and is vandal safe
Voltage for hold: 12VDC or 24VDC, 6 Watt
Switch between 12 and 24VDC
No holding force at no voltage
Operating temperature: -10 to + 55 ° C
Magnet: 216 x 53 x 32 mm
Amaturple plate: 185 x 45 x 14 mm
anti magnetic function
Weight: Approx. 4.5 kg

angle bracket for mounting on frame
for outward door

Angle bracket for mounting on frame
for fitting to outward door

Mounting bracket Kit. 3 parts
for inward door

Angle bracket for mounting on frame
for outward door

Accessories for DOOR-MAGNET-V12
Z-angle fittings for inward door (Inswing)
The kit consists of 3 parts
heavy aluminum profiles
target: See drawing

Accessories for Door-Magnet-V12CB
L-angle bracket for outward door (outswing)
The kit consists of 1 part
heavy aluminum profile
target: See drawing

Accessories for DOOR-MAGNET-V12CB
Z-angle bracket for inward opening door (inswing)
The set consists of 3 parts
Strong aluminum profiles
Dimensions: 220 x 75 x 47 mm

Mounting angle for DOOR-MAGNET-V8 for outward-facing door. The angle clamp is mounted on the lower edge of the door frame.
It is very important that the anchor plate is mounted floating suspended and that it can come into 100% contact with the holding magnet.

Tilbehør: Strømforsyning til IRISID-7111-U1

Compact motorized lock with separate pal
Locked without power
releases the locking pawl by transient voltage
two lock entrances
Can be mounted in 2 different ways
Control voltage - 12 - 28VDC / VAC max. 165mA
Dimensions: 60 x 60 x 22mm

Payment system for vending machines, doors etc.
Accepts contactless & nbsp; chip, magnetic stripe and MobilePay
GSM (SMA) and LAN (RJ-45)
2 x digital outputs. & nbsp;
1 x deaktiveringsindgang. Can be configured to deactivate the machine
Can be connected to a vending machine, washing machine, door, etc.
Web-based control panel, can be operated over the Internet
Support for setup can be purchased
Comes with SIM card
User agreement with service provider is required

Door magnet with team power up to 272kg
stainless steel and vandal safe
IP65 - Designed for harsh outdoor environment
Supply voltage: 12VDC or 24VDC 6WATT
Prepared for 12 and 24VDC - view Label unit.
No holding force at zero voltage
Dim: 218 x 44 x 27.5 mm
Dim plate for door: 185 x 38 x 12 mm
Operating temperature: -10 to + 55 ° C
Weight: 1.5kg
Buying access system - see accessories

21.5 "Infostander 1080x1920
Touch Screen
Spritdispenser 4 liters
Low Level Sprit
Adjustable amount of Sprit
Android Based
Wall bracket or foot can be purchased (not included)

Can be used with the Danbit program "Hi Customer"
and for monitoring the number of visitors in store

Call for prices!

Outdoor electromagnet for example. lattice door, gates etc.
door magnet with clamping force up to 272kg
Stainless steel and vandal proof
With waterproof gland for waterproof flex cable
IP67 close - designed for harsh outdoor environment
supply voltage by team: 12VDC or 24VDC 6Watt
Automatic switching between 12 and 24 VDC
No holding force when not energized
Magnetic: 218 x 44 x 27.5 mm
Door-plate: 185 x 38 x 12 mm
Operating temperature: - 10 to + 55°C
weight: 1.5kg

The switch is for non-contact access.
Up to 10 cm aktiveringsafstens (10 - 100mm)
Touchless EXIT contact with relay output
IR motion technology
Adjustable sensitivity
With blue and green LED
Relay switches to 12 - 28VDC, 3Amp
Stainless steel front plate
Supply voltage: 12VDC
Dimensions: 86 x 86 mm

Door magnet with holding power up to 545kg
Stainless steel cabinet fully sealed with epoxy
Supply voltage for team: 12/24VDC 6Watt
At 12V connect red to white, yellow to black
At 24V connect white to yellow. Red + Black -
No holding power when de-energized
Operating temperature: -10 to +55°C
Magnet: 220 x 68 x 42 mm
Amatur plate: 185 x 61 x 16 mm
Anti magnetic function
Weight: approx. 5 kg

Door magnet with holding power up to 816 kg
Stainless steel cabinet fully sealed with epoxy
Supply voltage for team: 12VDC 12Watt
No holding power when de-energized
Operating temperature: -10 to +55°C
Magnet: 284 x 72 x 48 mm
Amatur plate: 250 x 61 x 16 mm
Anti magnetic function
Weight: approx. 6 kg

Elektronisk dørmagnet til skydedør etc.
Holdekraft op til 272 kg
Aluminium hus og vandalsikker
Forsyningsspænding for hold: 12VDC eller 24VDC, 6 Watt
Omskiftning mellem 12 og 24VDC
Ingen holdekraft ved spændingsløs
Driftstemperatur: -10 - 55°C
Fugtighed: 0-95% non-condensing
Dobbelt-magnet: 187 x 38 x 27 mm
Dør-plader: 185 x 38 x 12 mm
Vægt: ca. 2kg
Tilkøb Adgangssystem - se Tilbehør

RFID reader 125kHz and 13.56MHz
IP65
Operating temperature: -20 ° C ~ 60 ° C
1.77’’ Color LCD
Bluetooth / USB
Lock+, Lock-, Monitor
Technical demanding product - Support hours can be purchased

Elektronisk kalibreringsværktøj til MW-BEAM100

Special door fittings for DOOR-MAGNET + E + S
L-Bracket: 50x33x251mm (WxDxL)
Z-Bracket: 50x100x190 mm (BxDxL)

Reading of license plates with the speed of 0-200 km / h
can register license plates for up to four lanes to 5-Megapixel resolution at 30 fps
Built-in infrared white LED (approximately 60 meters)
RJ45 gigabit port
Sound alarm
ONVIF support
Motion detection
WDR
Micro SD
PoE
12VDC / 24VAC
Extended operating temperature -40 - 60 °

Tilbehør til ALARM-GSM-BASE
Tilbehør til ALARM-GSM-PIR-UD
Kan blive trådløst tilsluttet til en alarmbase
Til tilslutning af kablede alarmsensorer
Til udendørs brug + stænktæt
Forsyningsspæning: 13.8V 200mA

NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase!

Payment system with touch display.
accept contactless, chip, magnetic stripe and mobilepay.
GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine
can be connected to a vending machine, washing machine, door, etc.
Web-based control panel.
Communications Internet or WiFi or 4G
Support for setup can be purchased.
Supplied with SIM card (4G)
Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)

The contact is for touch-free access.
Up to 15 cm Activation Equipment (30 - 150mm)
Touchless Exit Contact with Relay Output
IR Motion Technology
Adjustable Hold Timer
Adjustable Activation Distance 3 - 15cm
with blue and green LED
Relay contacts for 12 - 28VDC, 2AMP
Robust ABS Plastic front
Supply voltage: 12 - 24VDC
Goal: 86 x 86 x 10 mm
Buy Alu Back piece - see picture and accessories

Monteringsboks til mikrobølgebarriere

Panelmonterbar EXIT contact for access
Contact: COM / NO / NC
Brushed aluminum with red button
Not vandal proof
Dimensions: 112 x 70 mm
Contact up to 2 Amp

Projektørlamper til oplysning til brug af video overvågning

Angled bracket for the door-magnet-yx35 types.
for attaching the holdemagnet.
1 part of extruded aluminum
screws included
target: 260 x 55 x 33 mm
anodized

4 x Digital inputs NC/NO Type
4 x Analog inputs. 12 bit resolution
0-5V, 4-20mA or 0-20mA
4 x Relay outputs 5A/30VDC, 5A/250VAC
Up to 10 alarm receivers
1 x USB port for setup
GSM 3G 4G mobile network
9-36VDC (12V / 300mA)
Backup Battery 3.7V 1200mAh
Operating temperature -10- + 70 ° C
Customized SMS Alarm messages
APP for iOS and Android
Delivered WITHOUT SIM CARD

18500 Lithium-Ion battery
Rated voltage: 3.7V
Capacity: 2040mAh
Max. load: 3.8A
Operating temperature: +10 ~ + 45 ° C
Charging method: CC-CV
Dimensions: 18.5 x 49.5 mm
Weight: 36.5g
Without protection circuit

Designed for Nayax payment terminals and CCI coffee machines
RS232 Male DB9 connector for interface with coffee machines.
Power(DC), ethernet(RJ45) and external reader(RJ11) ports.
Eliminates the need for CCI to MDB converters

Power socket for door frame, w / monitor funk., 45 mm
Holding force: 900 kg.
Voltage: 12 VDC, 250 mA. Not included. For example, use DC12V / 1A-R-Q
Dimensions: 202 x 45 x 32 mm (H x W x D)
max. (H x B)

Bevægelsessensor med mikrobølge. Til brug i forbindelse med automatiske døre

For 19mm mounting hole
12VDC
IP65
NO/COM/NC
​Momentary reset
Metal

Miniature electronic holding magnet for cabinets
Supply voltage 12 VDC, minimum 140mA
Holding force: Up to 36 kg
with Bond sensor - Relay output COM, NC
Bond sensor is a closed indicator - Can inform the controller
Operating temperature: -10 ~ 55ºC
IP65 Stainless steel with epoxy filling
Magnet dimensions: 70 x 38 x 26 mm
Holding plate dimensions: 80 x 32 x 18.5 mm
Weight 350 g

Tampering Alarm, Object Counting, Intrusion Detection, Alarm Detection
Advanced Motion Detection (5 areas)
5MP/3MP@ 30 fps, 2MP@60fps
Resolution: 2592 x 1944
IR distance 35m
IP66 Weatherproof
-20°C to 55°C
PoE 8.3W max.
Micro SDHC support up to 64GB
ONVIF