Network products / Wifi / PoE / RJ45-Fiber

300Mbps AP, Gateway, Repeater, WDS, WISP
2T2R architecture with dual-polarization 14dBi antennas built
Transmission power: 100mW
10 / 100Mbps RJ45 Kirke pipe-mounting and wall mounting
supports WAN connection for DHCP, Static IP, PPPoE
IP55
Power supply: 48VDC 0.5A (802.3at PoE +) or 12VDC 1A (via DC jack)
Operating temperature: -20 - + 70 ° C
OUTLET - OLD MODEL

AT Commands Communication
Bandwidth 1.4/3/5/10/15/20MHz
LTE-FDD：B1/B3/B7/B8/B20/B28A
WCDMA：B1/B8
GSM：B3/B8
Input DC 8V-28V
working temperature -30℃-70℃
Dimensions 82 × 84 × 24mm
Max upstream rate 50Mbps
Max downstream rate 150Mbps
RS485/RS232

4-port 10/100 / 1000BASE-T RJ45 with IEEE 802.3af / 802.3at PoE injector
1-port 10/100 / 1000BASE-T RJ45 WAN port or LAN port interface (router mode or switch mode )
1 x USB 3.0 port for backing up and restoring configuration file
PoE power is 36Watt per port - automatically Detect PD
PoE monitoring, status, strømbudg PoE port enable / disable, PD live check
IP30 metal housing, DIN bracket
Dimensions: 180 x 140 x 25 mm | Operating temperature: -10 - + 60 ° C
Supply voltage: 48V ~ 56V DC (PSU purchased)
Supports IEEE 802.1Q / D
Security: port filter, MAC filter, IP source protection, anti-DoS

Wifi CAN converter. CAN CAN bridge. CAN PC
two CAN channels
AP mode and station mode
Compatible with Socket (TCP Server, TCP Client, UDP)
Support: Ethernet, ARP, IP, ICMP, UDP, DHCP, DNS TCP)
DIP switch for terminating
Isolation: 1500VDC
CAN baud rate: 5kbit / s to 1Mbit / s
Wifi: 2.4GHz IEEE802.11a / b / g
Supply voltage: 9 - 30VDC
Consumption: 80mA @ 24VDC
Dimensions: 118 x 94 x 23 mm
Operating temperature: -40 - + 85 ° C

PoE surge protection for 10/100/1000Mbit networks
Supports PoE voltage 48VDC / 40Watt
Nominal discharge: 2.5kA, max. 5kA (8/20myS)
Response time: less than 1ns (nano-second)
Transmission loss: below 0.2dB
2 x RJ45 female (in / out)
Protected pin: 4/5, 7/8 (power supply + data), 1 - 8 (data)
Operating temperature: -40 - +70°C
Humidity: less than 90% rh
Dimensions: 93 x 55 x 35 mm
Weight: 73g
DIN bracket
Ground cable of more than 2.5kv must be shorter than 1 meter
Ground cable thickness: Min. 2.5 sq.mm
Ground resistance must be less than 4 ohms
Nothing can protect against a direct lightning strike

WiFi antenna for 2.4GHz and 5GHz
50 Ohms, 50 Watts
Vertical radiation: 20 degrees
Horizontal radiation: 360 degrees
Bandwidth: 100/950MHz
Dimensions: ∅19 x 495 mm
Both for indoor and outdoor use
Operating temperature -40° - +85°C
Can be mounted directly on the AP-female connector

Gigabit PoE and data Extender PoE splitter
1 x RJ45 Data + PoE ++ input
2 x RJ45 Data + PoE + outputs
Standard: IEEE 802.3bt and 802.3at
from injector to Extender up to 100 meters
from Extender to PD Devices Up to 100 meters
IP67 Aluminum Molded cabinet
Temperature range: -40 - + 75 ° C
Plug Play
Wall fittings
Size: 170 X 44 x 73 mm with cable gland

1800 Mbit/s Access Point, Gateway, Repeater, WPA3, Dual Band, Wall / Ceiling Mounting
Support 802.1Q VLAN and SSID for VLAN Mapping
Ofdma (Orthogonal Frequency Division Multiple Access)
Support WiFi Multimedia (WMM), IGMP
Seamless Roaming
2.4GHz (600Mbps) and 5GHz (1200Mbps)
High transmission power, adjustable
4 built-in 5 dBi antennas
8 x SSID, up to 250 Clients
1 x RJ45 with PoE + input
1 x RJ45 LAN
supply voltage at non-PoE: 12VDC / 2A (5.5 / 2.1mm)
Dim: 186 x 186 x 36 mm
Operating temperature : 0 - +55°C

7 DBI outdoor Omni antenna with N-type female socket
Horizontal: 360 degrees
Vertical: 9 degrees at ½ power
700-900 / 1800-2170 / 2300-2690MHz
Length is 76cm
n She connector
for mounting on pipes
for mounting on wall
Wind resistant Over 250km / h
Weight: 400g
Max. Effect: 50W
Impredance: 50 Ohm
mounting brackets included
glass fiber, copper inside, stainless steel Feature

Unmanaged Switch
2 x RJ45 port 10/100/1000Mbit
2 x 100/1000X SFP-port
Samlet PoE effektbudget: 120W
2x60W PoE ELLER 1x90W PoE+1x30W
PoE standart: IEEE 802.3bt
IP67, IK10
Driftstemperatur: -40°C ~ 65°C
Option: PoH 100W / Managed

LoRaWan transceiver with 2 x digital inputs
LoRaWan transceiver with 2 x analog inputs 4-20mA / 0-10V
LoRaWan transceiver with relay output (SPDT)
Supports LoRa Class C protocol
Serial port: RS232 or RS485 (Transparent data)
Collect data sent to Lora-Gateway Controller
Frequency: 868MHz - Range Up to 10 km
Configuration Port: Micro USB
Operating temperature: -40 - +70°C
Supply voltage: 5 - 24VDC
Dim: 120 x 120 x 56 mm

LoRaWan transceiver with digital inputs
LoRaWan transceiver with relay output (SPDT)
Supporter LoRa Class C Protocol
Serial Port: RS232 or RS485 (Transparent data)
Collects data to be transmitted to LoRa-Gateway Controller
Frequency: 868MHz - Range Up to 10 km
1 x Antenna 2dBi - SMA male connector
Configuration Port: Micro USB
Operating temperature: -40 - +70°C
Supply voltage: 5 - 24VDC
Dim: 79 x 60 x 24 mm

LoRaWan with stable connection to IoT units
4 x 10/100 / 1000Base-T RJ45 LAN ports
1 x 10/100 / 1000Base-T RJ45 WAN port
1 x LoRa antenna - 2DBI with SMA male
1 x Serial console Port (RS485)
2 x DI / DO and 1 serial port (RS485) for Modbus applications
For EU 868MHz (SUB 1G) Frequency
8 Programmable parallel demodulation paths
static IP / PPPoE / DHCP client for WAN
DHCP server / NTP client for LAN
Protocols: TCP / IP, UDP, ARP, IPv4, IPv6
port forwarding; Qos; DMZ; IGMP; UPnP; SNMPv1, V2C, V3
Dim: 135 x 135 x 50 mm

LoRaWan with stable connection to IoT units
Dual Band WiFi - 2 antennas with RSMA male
3 x 10/100/1000Base-T RJ45 LAN ports
1 x 10/100/1000Base-T RJ45 Wan-Port
1 x LoRa Antenne - 2DBI with SMA male
2 x DI / DO and 1 serial port (RS485) for Modbus applications
to EU 868MHz (SUB 1G) Frequency
8 Programmable Parallel Demodulation Roads
Static IP / PPPoE / DHCP Client for WAN
DHCP Server / NTP Client for LAN
Protocols: TCP / IP, UDP, ARP, IPv4, IPv6
port forwarding; Qos; DMZ; IGMP; UPnP; SNMPv1, V2C, V3
Dim: 135 x 135 x 50 mm

Compact design
Output 54VDC vlotage for PoE device use
Space for PoE switch / PoE Surge protector installation
IP66 rated
Include Thermal Switch control heater and blower
Include fiber panel for fiber cable connection
Battery protection for deep discharge and short circuit
Space for 12V/7Ah Battery x 4PCS

Modular design for easy replacement
Supports 10M/100M/1G/2.5Gbps Ethernet
Supports 802.3af / 802.3at / 802.3bt / UPoE
Protects 8 wires of network cable, including PoE
Protects Up to 20KV / 10KA wave
Error indicator LED
Operating temperature from -40°C to 85°C
DIN rail mounting

2 Ports Poe Injector provides 2 x 36Watt for PD equipment
10/100/1000 Mbit
pin 4/5 (+), pin 7/8 (-)
4 x RJ45 (2 with data and 2 with data + PoE for equipment)
supply voltage: 12 - 56VDC
Power Budget is 60 - 72 Watt
Dim: 105 x 70 x 30 watts
Weight: 280g
Operating temperature: -40 - + 75 ° C
DIN mounting

2.5 Gigabit Ethernet adapter for USB3.0
RJ45 female and USB 3.0 male (Type A)
Full-duplex 10/100/1000/2500 Mbit / s
Supplied via USB port
OS support: Windows Vista / 7 / 8.1 / 10/11 and Macintosh OSX 10.6 / 10.7
Colour Black
5 cm cable
Note: Requires specific driver version. See Downloads

2.5 Gigabit Ethernet adapter for USB3.0
RJ45 female and USB 3.0 male (Type C)
Full-duplex 10/100/1000/2500 Mbit / s
Supplied via USB port
OS support: Windows Vista / 7 / 8.1 / 10/11 and Macintosh OSX 10.6 / 10.7
Colour Black
5 cm cable
Note: Requires specific driver version. See Downloads

Gigabit PoE and Data Extender / splitter
1 x RJ45 data + PoE + input
2 x RJ45 data + PoE + outputs
Standard: IEEE 802.3af and 802.3at
From Injector to Extender up to 100 meters
From Extender out to PD devices up to 100 meters
Wall mounting
Plug & Play
Temperature range: 0- + 50 ° C
Dimensions: 140 x 77 x 28 mm
Weight: 234g

Flexible modular configuration, 3 Module-dedicated slots
Up to 20 possible configurations in 4 power input versions
Up to 24 PoE ports, with maximum 720W of PoE power budget
4 x 1 Gigabit or 4 x 10 Gigabit SFP Uplink slots
RIPv1/v2, OSPFv2, IPv4 Static Routing, and Multicast IP routing
ITU-T G.8032 ERPS Ring, RSTP, MRP (client) and VRRP redundancy
Dedicated MACsec modules available for additional ultra-low-latency, high-throughput strong security
Rugged industrial design for -40° ~ +75°C harsh environment operation
PROFINET v2.33 CC-B conformance
EN50155 and EN50121-4 certified for Railway and Trackside applications

Media Converter for 10Gbit Fiber
1 x RJ45 10Gbit/5Gbit/2.5Gbit/1Gbit/100Mbit Base-T
1 x 10GBase-X SFP+ Slot
For 50/125my and 62.5/125my, Single Mode or Multi Mode
SFP Module is by default for LC connectors, Duplex, Single Mode / Multi Mode.
Purchase SFP Module
Supply voltage: 5VDC
Power supply included
Operating temperature 0 to +50°C
Dimensions: 94 x 70 x 26 mm

Vandal-proof and waterproof dome antenna
The LTE band 700-2700MHz (including GSM, 3G and 4G)
VSWR: <=1.5
Passive gain: 7-8 dBi
Polarization: Vertical
Nominal power: 50W
Input impedance: 50 Ohm
Cable length: 1.5 meters
Cable type: RG174
Connector type: SMA male
Weight of antenna: 57g
360° Omnidirectional
Center hole mounting

Function LTE-based WAN expansion for various IP networks

Applications Enterprise, surveillance, WiFi hotspots

Dual SIM For ISP fail-over

Web-UI Basic settings, CLI and Command Script for advanced settings

Ethernet Ports 1 configurable WAN & 2x Fast Ethernet

Includes WiFi support

Micro-SD Slot for log storage

Power Input DC 5-18V

Operating Temperature -30°C ~ 70°C

Weight 220g

Dimensions 93x90x27mm

Unmanaged 5 Ports Industriswitch
4 x RJ45 10/100Mbit
1 x St Fiber 100Mbit Multi Mode
IP40

Ethernet through the same phase of electric cables - sold as a set (2 pcs.)

Not suitable for industrial use.

Splitter for PoE via Ethernet cable
LAN with PoE in, gives LAN without PoE out
12 VDC 2A or 24 VDC 1A next to other equipment

Media converter for 100/1000Base-X SFP module
Can power equipment with PoE+
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase 100Mbit / Gigabit SFP modules.
10/100/1000Base-TX
56VDC PSU included.
Mid-span PoE (PSE) (4.5/7.8)
PoE power is max. 30 Watt
Alarm in case of link failure

Replaced by ETH-RJ45G-SFP2

1000Mbit Media converter can connect 2 different fiber networks and RJ45
Is suitable as a node in Gigabit fiber networks with 1 x RJ45
1 x RJ45 10/100/1000Mbit
2 x 1000Mbit SFP slot for SFP modules Single Mode and/or Multi Mode
Can also connect Single Mode networks with Multi Mode networks
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase additional Gigabit SFP modules.
5VDC power supply included

10/100 / 1000Base-TX for 1000Base-LX single mode, 15km
WDM wavelength-division-multiplexing - Simplex fiber cable only
Must be WDM convert at both ends of the fiber.

High Speed ​​Ethernet Adapter for USB3.0
RJ45 female and USB 3.0 male (type A)
Full duplex 10/100 / 1000Mbit
Supplied via USB port
OS support WIN2000, XP, VISTA , 7, 8, 10
Black with 10 cm cable

Rest storage

100 Mbit / s Net card for light guide
with ST connectors
PCI 3.3 / 5 V
32bit

Vulkaniseringstape/ isoleringsbånd til vandtætte samlinger, 19 mm x 5 meter

Outdoor 2.4GHz directional panel antenna 12 dBi
N she stick
Vertical spread is 28 degrees
Horizontal spread is 65 degrees
Wall bracket included
90 x 215 x 20mm

300 Mbps Dual Band WiFi Adapter
USB
Built-in Antenna
Supports 2.4 and 5 GHz
Windows XP (32/64-bit), Vista (32/64-bit),
7 (32/64-bit) and 8 (32/64-bit), Mac OS and Linux

Unmanaged 5 ports industriswitch
4 x RJ45 10/100Mbit
1 x SC fiber 100Mbit Single Mode
IP50

REMAINDER SALE

4 x 10/100Mbit RJ45 Managed switch with PoE+
2 x 10/100Mbit RJ45 redundant uplink ports
DC 48V Power Input (power supply not included)
Up to 25 Watts per port
Max. 80 Watt total power
Multiple Super Ring technology (MSRTM), 5ms recovery time
Dual Homing (RDHTM)
IGMP snooping multicast
Built-in hardware watchdog timer for system auto-reset
-40~60°C operating temperature

Multimode version, 850 nm
connector: DB15 Han to Ethernet, ST connector for 10Base-FL
Option Purchase: Aui cable for DB15
Fiber: 62.5 / 125um Multi mode Duplex to 10Base-FL
Max. Length of DB15 Cable of 50m
2 km Max at Multi Mode Cable
0 to 55 degrees (Standard operation)
10 to 90% (non-condensing)
IEEE 10Base-5 / FL Ethernet
sqe on / off

Connect Multimode fiber network with single mode fiber network
1 x 100Mbit Single Mode SC
1 x 100Mbit Multimode SC
Wavelength: 1310 / 1310nm
100Base-SX / LX fiber network
5VDC / 2A adapter included

4 port Gigabit network card
Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
PCI express 2.1 x 4
4 x RJ45
For normal and low profile

MODBUS
Serial Device Server
1 x RS232 / 422/485 port
Atop MB5001C
WIN XP / 7/8 / WIN 10
Web Server Config.
9 ~ 30 VDC

SFP - Optical Gigabit Transceiver
1000 Mbit
Mini GBIC Media Converter
LC, for duplex fiber cable
Single Mode
1310 nm
Max. 10 km

MiniGBIC / SFP optical transceiver
LC fiber cables, 1310nm
up to 2km with 50my fiber cable
typically 500 meters with 62.5my

100Mbit SFP multimode optical transceiver
For LC fiber cable
1310 nm
Up to 2 km
Operating temperature: -40 - +75°C

Ethernet 10Base-T / FL Multi-Mode converter
850 nm
Only for 10Mbit fiber - older network systems
RJ45 to Fiber ST
Max. cable length: 2km
Power is supplied from 12VDC 1A

10/100/1000Base-TX til 1000Base-LX, 1550 nm, Single Mode, 50 km
Kun til 1000Mbit fiber, Single Mode

WiFi booster 1W, 11/54 for outdoor use

2-way Wifi amplifier. NOTE: maximum radiated power must be 100 mW

NOTE: Cable not included

MiniGBIC / SFP optical transceiver
LC fiber cables
1310 nm
up to 10 km, single mode

Managed Industrial Fiber Switch to Network Back-Bone
24 Ports Managed Switch
24 x 100 / 1000Base-X SFP Mini-GBIC / SFP Slots
4 x 10Gbit SFP + Slots
4 x 10 / 100 / 1000Base-T RJ45 Ports, Shared with Port-1 to Port-4
Cyber ​​Security
IGMP Snooping
ERPS Fast Recovery Ring, Redundant
1588 Time Protocol for Time Synchronous Between Switche < Br> Objective: 440 x 200 x 45 mm (1u)
Temperature: -10 - + 60 ° C at AC supply
temperature: -40 - + 75 ° C at DC supply
supply voltage: 100 - 240Vac
supply voltage: 36 - 60VDC 1.2a