Extender / Amplifier

DVI-D og USB2.0 KVM-extender over netværkskabel
Punkt-til-punkt DVI-video og USB
Op til 100 meter over et enkelt CAT 5e / 6 / 7-kabel
Ukomprimeret HD-video med 1920 x 1200 opløsning
24-bit farvedybde
USB 2.0 op til 40 Mbps
ExtremeUSB® extender
Transparant USB overførsel
Maks. forsinkelse er op til 1ms
Plug and Play; ingen softwaredrivere kræves
Fungerer med operativsystemer fra: Windows®, OS X® og Linux®
Monteringskit: gør det muligt at montere enheder på vægge, skriveborde eller 19″ stativer.

DisplayPort KVM extender, 4K@30Hz and HD
100 - 150 meters with Cat. 6a patch cable (need good quality cable!)
4 x USB 2.0 ports on remote module
1 x USB B on local module
Transparent USB for K/M, USB drive, HDD etc.
4K@30Hz, 1080p@60Hz etc.
Independent two-way audio transmission
HDCP Compliant and Blu-Ray
Point-to-point cable connection
HDBaseT 2.0: Good EMI immunity
Supply voltage: 5VDC / 2A PSUs included
Dimensions: 110 x 110 x 30 mm
Operating temperature: -10 - + 45°C

HDMI KVM transmitter / receiver over networks
set with 1 x Transmitter and 1 x Receiver
with USB - Works with Touch screen
4K UHD HDMI over IP connection
Networkswitch must be with IGMP Snooping
Up to 120m Via Single RJ45 Cat 6 - Point to Point
Up to 60km (Single Mode) via Fiber Cable - Buying SFP Module
USB2.0 - Keyboard, Mouse and Touch screen, USB Memory, etc.
a transmitter to multiple recipients, multiple transmitters for multiple recipients
The devices can be used for Video Wall (8 x 16)
HDCP 1.4 Compatible
2 x 5VDC 1A Power Supply included

High End DisplayPort Extender
Resolution Up to UHD 4K, 3840 x 2160 @ 30Hz
single cable, CAT 6A up to 100 m
point-to-point connection
Plug and Play; No software drivers required
with Edid
supply voltage: 12VDC - Both TX and RX
can power the other device over the patch cable
Dim: 102 x 66 x 30 mm

Sender and receiver for the transfer of DVI signal up to 1.2 km via fiber optics
SC Multi Mode fiber cable PC and monitor
Also transmits audio signals to microphone and speaker
REMAINING STOCK - limited quantity

4K HDMI Extender over the patch cable
PoC (Power Over Cable) - Power supply to be one party TX or RX
2.0b HDMI / HDCP 2.2 / 1.4
up to 120 meters
4096 x 2160 @ 60Hz (120m), 1920 x 1080 @ 60 Hz (150m)
4K @ 50 / 60Hz 4:4:4
1080p @ 120Hz
Remote-IR in both directions
TX: HDMI in, HDMI out, IR Input + out (3.5mm jack), DC in, RJ45, RS232
RX: HDMI out, audio out, IR Input + out (3.5mm jack), RJ45, RS232
Plug and Play
Power supply: 24V 1A (1 pc included)
Dimensions: 157 x 90 x 20 mm | Weight: 333g
Operating temperature: 0 - + 40 ° C
Humidity: 20 - 90% RH (no condensation)

4K HDMI / USB video transmitter PoE over LAN
Suitable for Video wall
Use Multi casting switch (IGMP Snooping)
1080p power. 4K (3840 x 2160) HDMI Resolution
HDMI 1.4a - approx 0.5 sec Transmitter and Receiver Slow
1 x RJ45, 1 x DB-9 female, 1 x HDMI female, 1 x VGA DB-15 female
1 x USB 2.0 Type B (PC / Server)
Can be packed up to 8 x 16 video wall
Send and Receive Choices - 16 Channels (DIP)
Supply: IEEE 802.3af / at PoE +; 12V DC 2A (not supplied)
Range up to 100m over direct Cat. 5e / 6 UTP cables
EDID emulation and & nbsp; IR transfer
As receiver, use HDMI-MULTI4K-R

Transmits DVI video and audio signals up to 120m over a single CAT6 cable
Supports resolutions up to 1920*1080@60Hz
Supports keyboard and mouse signal transmission
A cable can transmit several signals simultaneously
Transmission distance: CAT 6 120m or TCP/IP
LAN diode flash at link
Plug and play support without any settings
Including DC12V/1A power supply
Size: 164 x 85 x 25 mm
Weight: 2 x 220g
Temperature: 0 - +50°C

4K HDMI/USB video receiver PoE over LAN
Suitable for Video wall
Use Multi casting switch (IGMP Snooping)
1080p or 4K (3840 x 2160) HDMI resolution
HDMI 1.4a - approx. 0.1 second delay between transmitter and receiver
1 x RJ45, 1 x DB-9 female, 1 x HDMI female
4 x USB 2.0 type A (mouse/keyboard/USB touch)
Can be fitted up to 8 x 16 video wall
Transmitter/receiver selector - 16 channels (DIP)
Supply: IEEE 802.3af/at PoE+; 12V DC 3A (not included)
Range up to 100m over direct Cat. 5e/6 UTP cables
EDID emulation and IR transfer
As transmitter, use HDMI-MULTI4K-T

HDMI Matrix over IP.
Video Wall configuration
Setup with DIP switches (TX-RX Pair)
Max 24 transmitters and 96 receivers (contact us for buying TX or RX units separately.) < br> HDMI 1.3, HDCP 1.3.
HDMI loop out to the local monitor
Resolution 1080p @ 60/50/30/25 / 24Hz, 720p @ 60 / 50Hz.
point to point over Cat 6. Maximum . 100meter. Point to many Hotels can be supplied via PoE (802.3af) or 12VDC 1A (PSU included).
Power Consumption: 2.5W.
Switch must support protocol: IGMP Snooping or IFMP.
Delay: 120ms
Operating temperature: 0 ~ 40 ° C.

Opløsning op til 1080p@60Hz.
Signaldistribution op til 70M.
Der kræves ingen ekstern strøm til RX -enheden.
Indbygget HDMI loop out-port på TX-enhed til en ekstra HDMI-skærm.
Kan stakkes til en anden TX for 1 in 8/12 out.
Understøtter RS232, CEC, EDID -styring.
Understøtter RS232 -kontrol.

Composite Video, BNC, over Single Mode 9/125my fiber cable
Set consists of transmitter and receiver module
Only single fiber (simplex) is used for digital transmission
Feel free to use normal duplex fiber cable, where one fiber is not used
Up to 10km between transmitter and receiver
Stand-alone or rack mounting

Max. 1920 x 1200 pixels
1 x KVM Extender Console Unit - Remote module
1 x KVM Extender Computer Unit - Local module
1 x 12V DC Power supply included for remote module
1 x KVM cable ( VGA)
USB (2 on Console Unit, 2 on PC Unit)
Only VGA and USB Mouse / Keyboard Transfer
Does Not Transmit Touch from Monitor
USB is only for mouse and keyboard
For point RJ45 network cable up to 200 meters
with Edid Emulation
2 controls for the same PC
Video adjustment

VGA Extender over TCP / IP or Point to Point.
Up to 200 meters over CAT 5e / 6 patch cable.
1920 x 1080 @ 60Hz
3.5mm Audio
USB for keyboard and mouse only!
Audio frequency: 32kHz, 44.1kHz, 48kHz
Sound format: DTS-HD / Dolby true HD / LPCM7.1 / DTS / DSD
Operating temperature: -5 ~ 70 ° C
Dimensions: 104 x 92 5 x 24 mm

DisplayPort booster up to 70 meters
Via RJ45 CAT5e / 6
4K @ 30Hz / 4: 4: 4 at 40 meters
1080p @ 60Hz 16bits at 70 meters
Audio: up to 7.1 LPCM 192KHz / Dolby TrueHD / DTS-HD MA
1 x DisplayPort
1 x RJ45
1 x DC 5V 2A to each unit 
Operating temperature: -10 to 45 ℃
Dimensions: 92 x 69 x 25 (mm)
Weight: 160g (Sender)
Weight: 180g (receiver)

HDMI video transmitter PoE
Suitable for video wall
With HDMI Loop Out
Delay of approx. 1 second from transmitter to receiver
HDMI 1.4a - H.264
By IP multicast use switch with IGMP Snooping
Range up to 100m
Cables Kat. 5th / 6
EDID Emulation
IR Transfer
1 x RJ45, 1 x DB-9, 1 x HDMI Input, 1 x HDMI Output
Supply IEEE 802.3af / at PoE +; 5V DC, 2A (not supplied)
As receiver, use HDMI-MULTI-HD-M

DisplayPort (DP) Cable
perfect alternative to HDMI Extender
Ultra solution 8K, 60Hz
AOC (Active Optical Cable) to 4-core optical fiber
Plug and Play
HDR RGB 4: 4: 4 (high Dynamic Range)
32.4Gbps bandwidth up to 100m
Supports 3D visual effects
Cable thickness: 5mm
70 meter
black
24K Gold plated
Non isolated

KVM extender for VGA, USB K/M over Cat 5/5e/6 UTP
Up to 300 meters distance from a computer
1920 x 1440 @ 60Hz
2 users can share 1 computer, locally and remotely
Ideal for professional video applications
Only supports the standard USB HID keys
USB ONLY for keyboard and mouse (not touch)
No drivers needed or software required
Dimensions: 95 x 97 x 28mm
Supply voltage: 9~12VDC, PSU included

KVM receiver to create several operating positions for one PC sends
KVM Extender up to 150 meters point to point Cat 6 cable
KVM Extender over TCP / IP.
A BOOST HDMI150-D LO transmitter supports up to 253 recipients
up to 1920 x 1080p @ 60Hz
Audio Format: DTS-HD / Dolby true HD / LPCM7.1 / DTS / DSD
USB KVM feature: Keyboard and mouse (HID signal) remote
USB 2.0 up to 480Mbps
Over router / switch with IGMP snooping
H.264 video.komprimering
Video standard: HDMI 1.3 and HDCP 1.2 standard
EDID emulation via PC's graphics card

REMAINDER SALE

HDMI Booster, point to point, point to multipoint
Cascade coupling from receiver to next receiver
Set with 1 x transmitter and 1 x receiver - VDSL communication
Up to 3800 meters
Full HD 1080p
HDMI 1.4
With IR return for HDMI player
DC 12V 2A power supply

Transmits uncompressed HD video and audio over CAT6a / 7 cable up to 100 meters
Can be powered monitors or receivers with hdbaset with PSE
PSE is the equipment that sends PoE out on RJ45 port
Power from mini-USB with no PSE connected
Map HDMI cable, eliminating the need for extra cables
Resolution up to UHD (3840 x 2160), Deep Color and HD Audio formats
4K @ 60Hz 4: 2 : 0
4K @ 30Hz 4: 4: 4
HDCP compliant and Blu-ray ready
Plug and Play no software installation
Compact size.
Easy to install
REQUIRE THE BEST QUALITY CABLE! No support if the cord is from Danbit

HDMI Video Receiver with PoE
Transmitter Module is purchased: HDMI-Multi-HD-T
Video Wall with a maximum of 64 units
H.264 Video Encoder / Decoder, IR transfer
Delay of approximately 1 second from transmitter to receiver
HDMI 1.4a
Connection over IP - Use switch with IGMP Snooping
Max. 64 Groups
Range Up to 100m - Point to Switch or to Transmitter
Cables Cat 6a. Good quality
Edid Emulation - possibly not on all screens, then buy it from Danbit
1 x RJ45, 1 x DB-9, 1 x HDMI exits
Supply IEEE 802.3AF / to POE + or 5V DC, 2a (not included)
Requires quality switch When used over IP
Dim: 130 x 82 x 30 mm

4K 60HZ up to 60m (HDMI 2.0)
4K 30HZ up to 120m (HDMI 1.4)
HDMI2.0/HDCP2.2
Point-to-Point
CAT6 cable recommended (at least CAT5e required)
IR transmition
5VDC Transmiter and Receiver

DisplayPort (DP) Cable
perfect alternative to HDMI Extender
Ultra solution 8K, 60Hz
AOC (Active Optical Cable) to 4-core optical fiber
Plug and Play
HDR RGB 4: 4: 4 (high Dynamic Range)
32.4Gbps bandwidth up to 100m
Supports 3D visual effects
Cable thickness: 5mm
50 meter
black
24K Gold plated
Non isolated

Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
15 meters
non-galvanically isolated
Supply From HDMI Source

Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel) Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
10 meters
non-galvanically isolated
Supply From HDMI Source

4K HDMI Extender Over Patch Cable
HDMI 1.4 / HDCP 1.2
Up to 120 meters
4K @ 30 Hz
One-to-One or One-To-Many
Max 12 RX Can be connected one TX (Daisy Chain)
120m Cat 6 / 100m Cat 5e
remote control IR from RX to TX
Plug and Play
Power supply: 5V 1A to USB port (2 pcs supplied)
Dimensions: 100 x 85 x 25 mm
Operating temperature: -15 - + 55 ° C
Extra receivers can be purchased BOOST-HDMI120-4K30RX

4K HDMI Extender Over IP
HDMI 1.4 / HDCP 1.4
Up to 120 meters (point-to-points)
4K @ 30 Hz
2 x USB-A 2.0 (HID emulation)
One-to-One or One-To-Many
Max 32 RX Can be connected One TX (Via Ethernet Switch)
Remote-IR from TX to RX
Plug and Play
Power Supply: 5V 1A (2 included)
Dimensions: 107 x 105 x 27 mm
Operating temperature: -15 - + 55 ° C
Weight: TX 499G, RX 494G
acquisition: K-USB4AM-AM -Fe to connect the USB-A port to PC

Overfør SDI-signalet op til 200 meter og op til 1200 meter med 5 i serie

VGA + audio Extender set via cat 6A UTP cable.
A transmitter with VGA in and VGA out to local screen
1 x RJ45 connector to point to point cable to receiver
Receiver (remote- Unit) with 2 x VGA output
No software or drivers
Gain (Equalization) Control selector for optimal image
2 sets can provide a total distance of 250m
resolution: 1280 x 1024 with cat 6A cable of high quality.
Ideal for exhibitions, shops, courtroom, bus station, etc.
Support sound AUX
Do not connect to network switch

KVM extender over single-mode fiber
simplex fiber (1 fiber) with SC connector
set with transmitter (TX) and receiver (RX)
HDMI-A 1.3, HDCP 1.2
1920 x 1080 @ 60Hz
HDMI Exit to local screen on transmitter
2 x USB-A 2.0 female on receiver for keyboard, mouse
USB 2.0, can accept USB hub to HID devices
Power Supply: 5VDC / 1A (supplied for transmitter and receiver)
Dimensions: 113 x 80 x 28mm
Operating temperature: -5 - + 70 ℃

With the included software for PC can be DVI-D shared via LAN
DVI-ETH + connect a DVI-D screen where desired and retrieves DVI signal over the network
Multiple DVI-ETH + can be connected to the same network
DVI-ETH + can also act as external graphics card via the PC USB port

1 x Transmitter, 1 x Receiver
Driverless
Up to 8 transmitters for each receiver
Up to 50 meters Point to Point, Wi-Fi up to 10 Meters.
Plug and Play
5Ghz 802.11
1920 x 1080p
Audio
OS Support: Windows, Mac OS, Linus, Android, IOS, NS, PS4/5, Xbox
Protocol: Miracast, DLNA, Airplay

HDMI BOOSTER HD 1080p
HDMI signal over single CAT 5e/6 cable
Resolution 1920 x 1080 @60Hz
POC: Power Over Cable. Transmitter powers Receiver
HDMI 1.3/HDCP 1.2
Supply voltage: 5VDC

DisplayPort (DP) Cable
perfect alternative to HDMI Extender
Ultra solution 8K, 60Hz
AOC (Active Optical Cable) to 4-core optical fiber
Plug and Play
HDR RGB 4: 4: 4 (high Dynamic Range)
32.4Gbps bandwidth up to 100m
Supports 3D visual effects
Cable thickness: 5mm
20 meter
black | 24K Gold plated
Non isolated

4K HDMI Extender over Patch Cable (Cat 5e / 6)
HDMI 1.4 / HDCP 1.4
With HDMI Loop out
Audio Input and Output
Up to 120 meters (Point-to-Point)
4K @ 30Hz
Plug and Play
Power supply: 5V 1A (2 pcs. Included)
Dimensions: 60 x 56 x 19 mm

Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
70 meters
non-galvanically isolated
Supply From HDMI Source

4k HDMI up to 100 meters
Supports HDMI 1.4a
Supports 3D format
infrared control
3.5mm audio input
2 pcs. PSU included
good quality

Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
30 meters
non-galvanically isolated
Supply From HDMI Source

DisplayPort (DP) Cable
perfect alternative to HDMI Extender
Ultra solution 8K, 60Hz
AOC (Active Optical Cable)
4-core optical fiber
Plug and Play
HDR RGB 4: 4: 4 (high Dynamic Range)
32.4Gbps bandwidth up to 100m
Supports 3D visual effects
Cable thickness: 5mm
8 meter
black
24K Gold plated
Non isolated

Passive VGA Extender Over Point to Point Network Cable
Complete Set With Sender and Receiver Box
Up to 100m. Just through PDS cable (paired cable) - Do not connect network switch
Max. 1280 x 1024 pixel 
Balun principle - unbalanced / balanced
Critical with network cable quality.
Supports only UTP network cables, cat. 6 or better
More noise immunity than active extenders.
No power required

DisplayPort (DP) Cable
Perfect picture quality
Ultra Resolution 8K at 60Hz, 4K@144 MHz
Plug and Play
Direction source to display
32.4Gbps Bandwidth 
POC - Remote unit Power supplied in cable
Non isolated

Ultra resolution 8K 7680 x 4320
Backwards compatible
Built-in network channel (ethernet)
Earc (Enhanced Audio Return Channel)
Also supports ARC (Audio Return Channel)
One- way transmision
Bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable Thickness: 4.8mm
20 meters

1x Audio Extender Transmitter
1x Audio Extender Receiver
Works with analog audio only
Over Cat5e/6/7 Up To 450M
Cable wire sequence must be 568B
Power over Cable(POC)
12VDC

DVI-I Extender, set of transmitter and receiver
Up to 60 meters with Cat 6
RJ45 Point to point wiring
Supports HDCP 1.2
Supports EDID
Power Supply 5VDC / 1A ( 2 pcs. included)
Dimensions: 87 x 44 x 23mm (L x W x H)
Weight 105g

DVI-D extender with local and remote module up to 50 meters.
Extend DVI-D up to 50 meters via CAT. 6 RJ45 Cable
Do not connect network switch
with built-in EDID (emulate monitor)
Power supplied with 5VDC from the DVI connector on the PCE
External power supply: Buy DC5V / 2A-R-Q

HDMI sends and receives over RJ45 Cat. 6/6e
1080P@60Hz
HDMI 1.3, HDCP 1.2
EDID
Suitable for transferring HDMI over an existing RJ45 installation
Up to 50 meters (Depends on cable quality)
Use only quality cable
HDMI male, RJ45 female
POWER over cable, the supply to the reciver module is transferred via cable.
Can be supplied with 5vDc via Micro USB Power on each module

Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
3 meters
non-galvanically isolated
Supply From HDMI Source

Emuler skærmens EDID informationer