Subcategories
Active filters
Web programmable controller with log, 8 x digital inputs Opto-isolated, I/O mirroring, 24bit counter, P2P, 9 - 28VDC
Web based controller with 8 digital inputs
Digital High is: +4 - +26VDC
8 x digital inputs Opto-isolated
Common ground
200Hz Counter - 24bit
Tasks: 50 Schedule Planned, 50 Conditional, 20 Tuffer Terms
Email Alarms by defined conditions
Supports encrypted e-mail servers such as Gmail
RTC with NTP server synchronization
No software required
Graph (Logged data)
HTTPS / TLS encrypted
Static or DHCP IP Address configuration
Modbus, SNMP, Remote Service, IP Filtering
On-site update
Supply voltage: 9 - 28VDC
Dim: 98 x 78 x 36 mm
4G LTE alarm and remote control, M2M, Datalogger, I/O with Digital and Analogue, 1-wire, Relay, MODBUS, 12 - 24VDC
Multi-band 4G LTE Cat.1 controller, logger and alarm
Setup via USB, SMS and HTTP API
USB setup - use USB cable with Mini B male
2 digital "dry contacts". High on contact
2 analog inputs, 0 - 10VDC or 4-20mA input (10bit)
4 relay outputs, COM, NO and NC
1-Wire input for up to 8 Teracom sensors
1 x RS485 for max. 8 MODBUS RTU sensors
Data logger with 70,000 logs
Upload data to HTTP/HTTPS Post in XML/JSON
SMS alarm and Email alarm to 5 recipients
Push mode – XML data is sent via HTTP Post to a remote server. Responses from server may contain relay setup.
10 to 28VDC, 370mA @ 12VDC - additional PSU
Dimensions: 158 x 119 x 34 mm
Weight: 470g
Temperature: -20 - +55°C
4 channel voltage data logger w/Graphic display. +/- 300mV to +/- 24volt. Each channel is isolated. 480,000 in memory
4 channel data logger with display
External memory with SD slot
USB port for PC
input: DC to 100Hz
+/- 0.3 Volt to +/- 24 volts
2ms Log -Interval with 10 Microvolt resolution
Log intervals: 2 MS to 60 minutes
Number of log intervals: 23
Daisy-Chain 4 x Log-MCR4V
Battery operation: 4 days to 130 days, dependent on logging
External power supply: Micro-USB adapter (not incl.)
Remote monitor over Ethernet with 24 input ports. 4 Digital input, S0. 6 x analog input. RS485. Modbusrtu to Modbus TCP. SNMP
Multi input data logging for up to 70000 login
10/100 Mbit Ethernet
Password protected, web-based configuration and control
4 digital inputs, compatible with S0 pulse interface
6 analog inputs with 0 / 10V and 0 / 20ma
Modbus RTU interface for up to 24 sensors (registers)
Up to 24 channels for monitoring
Up to 24 Independent Alarms
SNMP V.2 Support - SNMP Trap - Alarm Alerts
HTTP and SNMP port change - HTTP API commands
Periodic HTTP post of XML / JSON Status files for client server systems
Modbus TCP / IP support
Dynamic DNS with dynns, no- IP and DNS-O-MATIC Support
NTP protocol support
supply voltage: 10 to 32V DC
2 Ch temperature, humidity log 0 - +55°C, Wifi, Bluetooth, USB, external combi sensor. Free T&D WebStorage Cloud Service
Wireless Temperature and humidity logger with WiFi, Bluetooth, USB
Battery operation from 10 days (one measurement per minute auto-upload)
Battery operation up to 1 year (1 measurement per hour auto-upload)
longer battery operation of Bluetooth turned off during the logging
2 x 8,000 measurements in memory with the date and time stamp
external temperature / humidity sensors
temperature: 0 - + 55 ° C
humidity 5 - 95% RH
Accuracy: +/- 0.5 ° C
Accuracy: 1% RH
sensor response time: ca. 7 minutes
Free Cloud service: TD WebStorage
LCD display shows current measurements
PC software: tools and presentation included
USB port
Dimensions: 78 x 58 x 26 mm
Battery type: AA
Power on and off PDU for equipment via network, with Wifi, 8 x 240VAC IEC C-13 outlet, IEC C-20 input
Remote-controlled 230VAC power rail with on/off per output
1U 19" for rack mounting - rack bracket included
8 x 240VAC C-13 outlets
1 x C20 input plug. C-19 plug not included
Switch on / off Server via the network / Internet
User interface is via Web browser
Wi-Fi connection
Password protected
Supports iPhone and Android
Temperature, humidity, UV, brightness data logger. Transfer via USB port. 0 - +55°C, 10 - 95% RH, 0 - 130kLux, mW/cm2
Temperature, humidity, UV. Lux data logger with memory
measurement data for PC via USB port
measurement data for PC via RS232 Port
8,000 measurements per Type in memory with date and time stamp
Luminance: 0 - 130,000lux
UV intensity: 0 - 30mW / cm2
External sensors
Free Cloud Service: TD Webstorage for data collector
LCD Display Displays current measurements
PC Software: Tools and presentation included
Dim: 78 x 55 x 18 mm
Battery type: AA X 1
2 channel temperature logger with LAN interface. 2 x external sensors -40 - + 110 ° C: Clearance
Residual sale
2 channel temperature logger with external sensor
Temperature sensor: -40 - + 140 ° C
Freedding temperature: -40 - + 80 ° C
1 x RJ45 Ethernet
1 x Power Jack 3.5 / 1.5 mm 6VDC
2 channel temperature, humidity logger 0 - +55°C, LAN, USB, external combi sensor. Free T & D WebStorage Cloud Service
Wired LAN temperature and moisture logger, USB
Battery operation from 10 days (1 measurement per minute Auto-upload)
Battery operation Up to 1 year (1 measurement per hour Auto-upload)
2 x 8,000 Memory measurements with date and time stamp
External temperature / moisture sensors
Temperature: 0 - + 55 ° C
Moisture: 5 - 95% RH
Accuracy: +/- 0.5 ° C
Accuracy: 1% RH
Feeling Response Time: Approx. 7 minutes
Free Cloud Service: TD Webstorage
LCD Display Displays Current measurements
PC Software: Tools and presentation included
USB port
target: 78 x 58 x 26 mm
Battery type: Aa
Energy meter / logger with 8 x 230VAC IEC C13 outlets via the network. KWh per outlet. Unable switches outputs! Rackmount, 1U.
Energy meter Per outlet in KWh.
Cannot turn on / off exits !!
8 x 230vac IEC C13 Outlet with energy measurement in kWh per removal.
Web interface
T&D CO2, temperature and humidity data logger - internal sensors
Datalogger til fugt, temperatur og CO2 måling
Web enabled temperature and humidity module for 4 x 1-wire sensors. Up to 64 lsensors w/log. RTC, Modbus/TCP/IP, XML. 9 - 28VDC
WEB-based data logger for temperature and humidity sensors
Can be programmed to 3 second sample time
-55 - + 125°C, -40 - + 80°C 0 - 100%rH
4 pcs. 1-Wire bus for 16 sensors, each
Max. 64 pcs. temperature or temperature/humidity sensors
Max. distance to sensors: 180 meters
Tasks: 50 scheduled, 50 Conditional, 20 override
Email alerts, custom (encrypted email servers, such as gmail)
Real-time clock with NTP server synchronization
No software required
Configurable logging
Graph (logged data)
HTTPS/TLS encrypted
Static or DHCP IP address configuration
Modbus, SNMP, Remote Service, IP filtering
On-site is updated
For DIN rail / wall
Supply voltage: 9 - 28VDC, 134mA
Dimensions: 98 x 78 x 36 mm
Base station which transfers LOG-DATA from all Wireless Data loggers in the system. Via Wifi PC or T&D WebStorage Cloud
Radio base station retrieves Log data from loggers
base station is a link between loggers and PC
base station data from 100 wireless loggers
Frequency Band Base Station and Data Logger is 870MHz
Up to 150meter - depending on conditions
Greater distance with repeaters (radio-relay stations)
interface for presentation PC is Wifi
USB interface to PC for setup:
base station, connection dock for Data Like (Optical)
Protocol: SMTP (POP before SMTP-AUTH (login) FTP, SNTP, DHCP, DNS)
temperature: -10 - + 60 ° C
Dimensions: 102 x 83 x 28 mm
Power supply included
Only for T&D loggers
Current Data Logger 4 - 20mA, 20mS sampling time, 16-bit resolution, channel 1, 8MB of memory, battery power, USB
The 16-bit A / D converter in data logger failed
With temperature compensation to 8 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Battery operation - 12 year battery
optional: Software for configuration export, plotting, analysis and reporting (not included)
Configurable alarm controls
measurement speed from 20 milliseconds (1 channel) to 12 hours
Robust aluminum housing
coated circuit boards to protect against moisture, corrosion
Dimensions: 88 x 65 x 24mm
Weight: 200 grams
Web enabled temperature and humidity module for 4 x 1-wire sensors. Up to 64 lsensors w/log. RTC, Modbus/TCP/IP, XML. PoE.
WEB-based data logger for temperature and humidity sensors
Can be programmed to 3 second sampling time
-55 - + 125°C, -40 - + 80°C 0 - 100%rH
4 pcs. 1-Wire bus for 16 sensors, each
Max. 64 pcs. temperature or temperature/humidity sensors
Max. distance to sensors: 180 meters
Tasks: 50 scheduled, 50 Conditional, 20 override
Email alerts, custom (encrypted email servers, such as gmail)
Real-time clock with NTP server synchronization
No software required
Configurable logging
Graph (logged data)
HTTPS/TLS encrypted
Static or DHCP IP address configuration
Modbus, SNMP, Remote Service, IP filtering
On-site is updated
For DIN rail / wall
Supply voltage: PoE or 9 - 28VDC, 134mA
Dimensions: 98 x 78 x 36 mm
Data collector and programmmer with optically JIG and LCD display to T&D data loggers. USB interface for PC. Battery
Base unit with display and optical communication
Jig for programming T&D data loggers
Jig for collecting stored log data from T&D data loggers
USB connection to PC
Free software for PC
Battery operation - Operating time approx. 100 days
OPTIONAL: AC adapter is acquired 6VDC, 3.5 / 1.5 mm plug
Dim: 125 x 58 x 26 mm
Weight: 90 g
Temperature, humidity, UV, Brightness data logger. Wireless to data collector 150m, 0 - +55°C, 10 - 95% RH, Lux, MW
Wireless Temperature Logger with memory
Sending measurement data to the data collector (base station) at 870MHz
Distance between the data logger and data collector up to 150 meters
Data Logger is not on-line
8,000 measurements per type of the memory with date and time stamp
Luminance: 0 - 130.000Lux
UV intensity: 0 - 30mW / cm 2
External sensors
Free Cloud service: TD WebStorage for Data collector
LCD display shows current measurements
PC software: tools and presentation included
Data Logger setup with Data collector Optical
Dimensions: 78 x 55 x 18 mm
Fixed antenna: 60 mm
Battery type: AA x 1
Standalone Modbus RTU Datalogger, Master or Slave, RS485, 12 ~ 35VDC,
Modbus RTU Master or Slave
RS485
Memory: 4GB
DIN rail Mounting
Supply voltage: 8 ~ 24VAC / 12 ~ 35VDC
Power consumption: 3.5W
galvanically isolated
Software for Windows included
Integrar Web server
16 x Voltage measurement +/- 10V 16bit, 2 x analog +/- 10V output, 16bit, 4 x digital I / O for USB
Multi I / O module for measurement and with USB port
16 Analog inputs, +/- 10V, +/- 5V, +/- 2V, +/- 1V
16 bit resolution
frequency Up to 250kHz Total Samplings-Rate
2 Analog Exit +/- 10 Volt
4 Digital Entrance TTL / CMOS
4 Digital Outputs TTL / CMOS
1 Counter Input, 16 Bit
Voltage Variety from USB The port
Buy DAQ Software: NEXTVIEW
Dim: 167 x 113 x 30 mm
Humidity meter (hygrometer) 10% - 95% rh.
Humidity meter
Humidity / temperature data logger
Long-term monitoring of rooms
With alarm function and interface
Numeric and graphic display
Temperature data logger for thermocoupler sensors 20mS sampling time, 16-bit resolution, 8MB of memory, battery power, USB
The 16-bit A / D converter in data logger failed
With cold-junction temperature compensation to 8 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Battery operation - 12 years battery
, if you acquire: Software for configuration export, plotting, analysis and reporting (not included)
Configurable alarm controls
measurement speed from 20 milliseconds (1 channel) to 12 hours
Robust aluminum housing
coated PCB for protection against moisture, corrosion
Dimensions: 88 x 65 x 24mm
Weight: 200 grams
GSM / 4G / GPRS base station for T & D data loggers. Mobile data collection from wireless T & D meters. Cloud service
Measurement data via mobile network
for Nano SIM card
protocols: HTTP, HTTPS, FTP, SNTP, SMS
collector measurement data from wireless T&D loggers
can serve up to 20 T&D loggers
Free T&D WebStorage Service - Cloud Based
Notifications with SMS by measurement limit
Setup with Bluetooth or USB
Battery operation Supplement. Powered from 9 - 38VDC
Gradual data collection from units of measurement Up to 150meter
SS relay output and digital input
target: 96 x 66 x 39 mm
Weight: 135g
3G Base station transfer LOG-DATA from Wireless Data loggers in the system. Transferring to PC or Cloud via 3G mobile network
Radio base station retrieves Log data from loggers
base station is a link between loggers and PC
base station data from 100 wireless loggers
Frequency Band Base Station and Data Logger is 870MHz
Up to 150meter - depending on conditions
Greater distance with repeaters (radio-relay stations)
Transfers the log data via GSM 3G GPRS mobile network
USB interface to PC for setup:
base station, connection dock for data Like (Optical )
Protocol: SMTP (POP before SMTP AUTH (login) FTP, SMS
SMTPS (SMTP over SSL)
Temperature: -10 - + 55 ° C
Dimensions: 96 x 66 x 39 mm | Power supplied
only for T&D loggers
Handheld data collector and programs for wireless T&D data loggers of the LOG-WL5XX series. LCD Graphic Display
Data collector with LCD display
USB interface for PC
optical communication for units of measurement
Short Range radio communication for units of measurement
Only for TD data loggers
Environmental monitoring of CO CO2, temperature, humidity. For APP, MODBUS RTU / TCP, RJ45, RS485, alarm
CO2 - CO - temperature - humidity
measurement of carbon monoxide and carbon dioxide
alarm device at high concentration
color LCD display with touch
CO 9-1000 ppm
CO2 0-9999 ppm
Electrochemical sensors (NDIR CO2 sensor)
temperature of -10 - + 50 ° C, humidity 0 to 100% RH
Up to 450,000 logs with date and timestamps
APP: iOS APP and Android APP, powerful software
DCON, Modbus RTU / TCP and MQTT protocols
RS-485 2-wire / Ethernet RJ45
Relay output for local alarm or building management
Power supply: PoE and 12 - 48VDC ca. 3.5Watt
IP43 sealed enclosure (CO2 + temperature sensor)
Dimensions: 114 x 106 x 56 mm
DIN or wall mounting bracket
7-channel 4-20mA current data logger, speed 20ms to 12 hours, 16bit resolution, 4MB of memory, Battery operation, USB
16-bit 4-20mA to-digital converter
With temperature compensation
4 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Input ranges (4-20mA, version with 0-50mA)
Battery operation - 10 year battery
Tilkøbes: Software for configuring, downloading, graphing, analysis and alarm reporting (not included)
Configurable alarm controls / overvoltage control
Measurement speed from 20 milliseconds (1 channel) to 12 hours
Robust aluminum housing
Coated printed circuit board for protection against moisture, corrosion
7 channel 0 - 20Vdc voltage data logger, speed 20ms to 12 hours, 16bit resolution, 4MB of memory, Battery operation, USB
The 16-bit analog-to-digital converter
Versions: 0-20VDC, 0-10VDC, 0-5Vdc, 0-2VDC
With temperature compensation
4 Megabytes of memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Programmable input ranges (0-2 VDC, 0-20 VDC)
Battery operation - 10 year battery
Acc: Software for configuring, downloading, graphing, analysis and alarm reporting (supplied)
onfigurable controls alarm / surge control
Measurement speed of from 20 milliseconds (channel 1) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion
3 phase energy meter with MODBUS RTU (RS485 interface)
3 phase energy meter / logger with Windows software
1 faset energimåler med MODBUS RTU (RS485 interface)
1 fase energimåler/logger med Windows software
7-channel 4-20mA current data logger, speed 20ms to 12 hours, 16bit resolution, 2MB of memory Battery operation, USB
16-bit 4-20mA to-digital converter
With temperature compensation
2 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Input ranges (4-20mA, version with 0-50mA)
Battery operation - 10 year battery
Add on: Software for configuring, downloading, graphing, analysis and alarm reporting (not included)
Configurable alarm controls / overvoltage control
Measurement speed from 20 milliseconds (1 channel) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion
7 channel 0 - HQ 20Vdc voltage data logger, speed 20ms to 12 hours, 16bit resolution, 4MB of memory, Battery operation, USB
16-bit analog-til-digital konverter - høj nøjagtighed
Med temperaturkompensation
4 Megabyte hukommelse til log-data
USB og RS232, automatisk baudrate op til 115.2kbit
Programmerbare inputområder (0-2 VDC til 0-20 VDC)
Batteridrift - 10 års batterilevetid
Tilkøbes: Software til konfiguration, download, plotning, analyse og alarmrapportering (medfølger ikke)
Konfigurerbare alarmkontroller / overspændingskontrol
Målehastighed fra 20 millisekunder (1 kanal) til 12 timer
Robust aluminiumskabinet
Lakeret printkort til beskyttelse mod fugt, korrosion
Environmental monitoring station, industrial and outdoor. CO2, particle, temperature, humidity. APP, MODBUS RTU/TCP, RJ45, RS485
Industrial / outdoor robust environment-measuring station
Partikkelstørrelser down from 0.3μm to 10 μm
CO2 0-9999 ppm - electrochemical sensor
temperature of -20 - +50°C
Humidity of 0 - 100% RH
Dewpoint measurement based on the temperature and moisture
Up to 180,000 logs with date and time stamps
Web-based configuration interface
Effective software: iOS APP and Android APP (free)
DCON, Modbus RTU / TCP and MQTT protocols
RS-485 / Ethernet / PoE
Relay output for local alarm or building management
Power supply: PoE and 12 - 48VDC ca. 3.5Watt
IP43 sealed enclosure (CO2 + temperature sensor)
Dimensions: 211 x 130 x 70 mm
DIN or wall mounting bracket
4 channel temperature data logger for Pt100 / Pt500 / Pt1000 sensor, -200 to 850°C, 16bit, 4MB of memory, Battery operation, USB
Super fast data logger with sampling time for 1 channel from 20ms
16-bit temperature to digital converter
4 MB of memory to log data
Equations for TCR 0.00385 and 0.00392.
Custom equations support other RTD sensors.
Both USB and serial interfaces with auto baud rate up to 115,200 bps
Over 10 years of battery
Powerful software for configuring, downloading, graphing, analysis and alarm reporting
Configurable alarm control / excitationskontrol
Wide choice of sampling interval (20 milliseconds to 12 hours)
Robust aluminum housing. Coated PCBs for protection against moisture, corrosion and mildew.
Coated PCBs for protection against moisture, corrosion and mold.
Environmental monitoring station for industrial and outdoor. CO CO2. Temperature and humidity, APP, RTU MODBUS / TCP, RS485 RJ45
CO2 - CO - temperature - humidity
Industrial / outdoor robust environment-measuring station
LCD color display
CO2 0-9999 ppm - electrochemical sensor
temperature of -20 - + 50 ° C, humidity 0 to 100% RH
dewpoint measurement based on the temperature and moisture
Up to 450,000 logs with date and time stamps
Web-based configuration interface
APP: iOS APP and Android APP, powerful software
DCON, Modbus RTU / TCP and MQTT protocols
RS-485 / Ethernet / PoE
Relay output for local alarm or building management
power supply: PoE and 12 - 48VDC ca. 3.5Watt
IP43 sealed enclosure (CO2 + temperature sensor)
Dimensions: 211 x 130 x 70 mm
DIN or wall mounting bracket
7 channel 0 - 20VDC Voltage data logger, speed 20ms to 12 hours, 16bit resolution, 4MB memory, battery operation, USB
16-bit analogue-to-digital converter
With temperature compensation
4 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Programmable input ranges (0-2 VDC to 0-20 VDC)
Battery operation - 10 year battery
Acc: Software for configuring, downloading, graphing, analysis and alarm reporting (not included)
Configurable alarm controls / overvoltage control
Measurement speed from 20 milliseconds (1 channel) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion
Load cell - Strain Gauge data logger up to 6-wire, 16bit, 4MB memory, 20ms sampling time, Battery operation, USB
16-bit strain gauge / weighing bridge amplifier - datalogger
With temperature compensation
Excitation sense 2.5VDC
Bridge input: +/- 8mV Version: 16mV and 32mV
4 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Programmable input ranges (0-2 VDC, 0-20 VDC)
Battery operation - 10 year battery
Acc.: Software to configure, download, plotting, analysis and an alarm (not supplied)
Configurable alarm controls
Measurement speed of from 20 milliseconds (channel 1) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion
7 channel 4-20mA current-precision data logger, speed 20ms to 12 hours, 16bit resolution, 4MB of memory, Battery operation, USB
16-bit 4-20mA to-digital converter
Temperature Compensated AD converter to 4 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Input ranges (4-20mA version with 0-50mA)
Battery operation - 10 year battery
, if you acquire: Software for configuring, downloading, graphing, analysis and alarm reporting (not included)
Configurable alarm controls / overvoltage control
measurement speed from 20 milliseconds ( 1 channel) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion
7-channel 4-20mA current data logger, speed 20ms to 12 hours, 16bit resolution, 8MB of memory Battery operation, USB
16-bit 4-20mA til-digital konverter
Med temperaturkompensation
8 Megabyte hukommelse til log-data
USB og RS232, automatisk baudrate op til 115.2kbit
Inputområder (4-20mA, version med 0-50mA)
Batteridrift - 10 års batterilevetid
Tilkøbes: Software til konfiguration, download, plotning, analyse og alarmrapportering (medfølger ikke)
Konfigurerbare alarmkontroller / overspændingskontrol
Målehastighed fra 20 millisekunder (1 kanal) til 12 timer
Robust aluminiumskabinet
Lakeret printkort til beskyttelse mod fugt, korrosion
Industrial controller for measuring and controlling the processes. With ethernet and 4G, with data logging, MQTT, IoT
Advanced Controller with logging
With slot for internal I/O expansion module, A/D, D/A, D/I, D/O, relay
Program with simple logic functions - WISE (Web Inside Smart Engine)
Logic functions with IF-THEN-ELSE logic
Supports SNMP, SMTP, FTP, MQTT, Modbus / TCP / RTU and DCON
Ethernet 10/100 / 1000Mbit
Setup via the built-in Web server
1 x RS232 port
2 x RS485 port
Supply voltage: 12 - 48VDC
16 x voltage inputs, up to +/-10V, 16bit, 2 analog outputs +/- 10V, 16bit, 32 DI/DO, LAN, POE
Measuring module for analog in / out and digital in / out
16 x analog inputs 16 bit, (± 10V, ± 5V, ± 2V, ± 1V)
2 x analog outputs 16 bit, (± 10V )
32 x digital inputs / outputs Choose with SW
Total Sample Rate 250khz
Galvanically Isolated for LAN
Digital Inputs / Outputs are TTL / CMOS <3 x Counter 32 Bit, Max. 16 MHz
pulse, increment decoder or pulse measurement
TCP / IP Ethernet
power supply from PoE or externally with 12-40VDC
synchronized for real-time
comes with programming examples in VB, C++ Delphi ,. Net
Can be used with NextView, LabVIEW and Profilab Graphic
14 days free trial with NEXTVIEW 4
Web server box for log-MXXX data logger series. 50gb of memory. Real-time log view. Supports up to 10 data loggers
Web browser access to your data loggers
e-mail and SMS alarms at cross-border
with LAN and WiFi
4 x USB ports for data loggers
with USB Hub Supports up to 10 Data loggers
50GB flash memory for log data
Automatic log data Real-time log display
Good graphical cutting surface and data export
Power supplies connected data loggers
Web server software for log-MXXX data logger series. Supports up to 100 data loggers. Real-time log view
Web server for log-mxxx series
Supports up to 100 data loggers
Displays real-time log data
Displays logger status
On-line logger Configuration
log data is automatically downloaded
Send e-mail / SMS alarm at cross-border
smartphone / tablets with web browser can display log data
access with password log-in
8 channel 0-20VDC, 0-5Vdc voltage data logger speed 20ms to 12 hours, 16bit, 8MB of memory Battery operation, WiFi, USB
Spændingsmålings data logs of Wifi
16-bit 0 - 20Vdc / 0 - 5VDC to-digital converter
MODBUS TCP (MODBUS TCP Server) to 8 Megabyte memory to log data
USB, RS232 and WiFi, automatic baud rate up to 115.2kbit
Input ranges (4-20mA, 0-50mA version)
Battery operation - 10 year battery
, if you acquire: Software for configuring, downloading, graphing, analysis and alarm reporting ( not supplied) Configurable
controls the alarm / surge control
measurement speed of from 20 milliseconds (channel 1) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion
8 channel Temperature Data logger for thermocoupler, 20mS sampling time, 16-bit, 8MB of memory, battery power, WiFi, USB
8 channel data logger about Wifi, USB, RS232
16-bit A / D converter in data logger failed
With cold-junction temperature compensation to 8 Megabyte memory to log data
Wifi, USB and RS232 automatic baud rate up to 115.2kbit
Battery operation - 12 year battery
, if you acquire: Software for configuration export, plotting, analysis and reporting (not included)
Configurable alarm controls
measurement speed from 20 milliseconds (1 channel ) to 12 hours
Robust aluminum housing
coated printed circuit boards for protection against moisture, corrosion
Dimensions: 88 x 65 x 24mm
Weight: 200 grams
8 channel 4-20mA current data logger for Wifi, speed 20ms to 12 hours, 16bit resolution, 8MB of memory Battery operation, USB
Current / current data logger of Wifi
16-bit 4-20mA to-digital converter
With temperature compensation to 8 Megabyte memory to log data
USB, RS232 and WiFi, automatic baud rate up to 115.2kbit
Input ranges (4-20mA, 0-50mA version)
Battery operation - 10 year battery
, if you acquire: Software for configuring, downloading, graphing, analysis and alarm reporting (not included)
Configurable controls the alarm / surge control
measurement speed of from 20 milliseconds (channel 1) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion