Network products / Wifi / PoE / RJ45-Fiber

5GHz, 900Mbps AP, Gateway, Repeater, Bridge, WISP
802.11 b/g/n/ac
2T2R architecture with dual-polarizing 14dBi antennas built-in
Transmission power: 100mW
2 x 10/100/1000Mbps RJ45 Ethernet
For pipe mounting and wall mounting - clamping band included
Supports WAN connection in DHCP, Static IP, PPPoE
WPA/WPA2, WPA-PSK/WPA2-PSK and 802.1X RADIUS authentication
IP55
Power supply: PoE+ (48Vdc) or 12VDC 1A (via DC jack)
Operating temperature: -20 - +70°C
Dimensions: 260 x 87 x 38 mm

2 x Wifi hardware consisting of APs antennas and power supplies
Connect 2 LAN networks between 2 buildings, wireless.
PoE supply (optional).
Lightning transient protection included - placed in the masts

300Mbps AP, Gateway, Repeater, WDS, WISP
2T2R architecture with dual-polarization 14dBi antennas built
Transmission power: 100mW
10 / 100Mbps RJ45 Kirke pipe-mounting and wall mounting
supports WAN connection for DHCP, Static IP, PPPoE
IP55
Power supply: 48VDC 0.5A (802.3at PoE +) or 12VDC 1A (via DC jack)
Operating temperature: -20 - + 70 ° C
OUTLET - OLD MODEL

2.4GHz, 300Mbps AP, Gateway, Repeater, Bridge, WISP
802.11 b/g/n
Includes 2 pcs. 8dBi antennas
2 x N female
Transmission power: max. 500mW
1 x 10/100Mbps RJ45
For pipe mounting and wall mounting
WPA/WPA2, WPA-PSK
IP65
Power supply: PoC or PoE+ 48VDC (injector included)
Pin 4/5 +, 7/8 - PoE input.
Operating temperature: -20 - +70°C
Dimensions: 880 x 200 x 80mm
Weight 1.7kg

Outdoor robust Dual Band Access Point etc.
AP, Gateway, Repeater, Wi-Fi Mesh
2.4GHz and 5GHz, 600/2400Mbit (3000Mbit)
Up to 256 clients Wi-Fi 6
1 x RJ45 Gigabit port PoE+
IEEE 802.11ac 2T2R - Wave 2
Up to 20dBm (EIRP)
4 x N-female connector
IP67 cast aluminum housing for mast mounting
Operating temperature: -40 - +70°C
Real-time Wifi channel analyzer
Dimensions: 295 x 231 x 80 mm
Weight: 2.5kg
Supply: PoE, 48V/0.5A (PoE+)

Industrielt 2,4/5GHz trådløst Access Point
1200Mbps 802.11ac
Dual Band
LAN Gigabit Ethernet 
1 x 10/100/1000BASE-TX RJ45 port med PoE
2 x 2.4GHz 5dBi SMA antenne, 2 x 5GHz 5dBi SMA antenne med RP-SMA-stik 
802.3at PoE, 48-56V DC input
IP30 tæt kabinet
Driftstemperatur -10 til +60°
Til vægmontering

WLAN up to 150Mbps (Single radio 2.4GHz)

Industrial 1x1 SISO (Single Input Single Output)

IEEE 802.11 b/g/n

2 x 10/100Base-TX WAN/LAN Port

Chipset: Qualcomm/Atheros AR9331 SoC

Tx Power (EIRP) 21 dB for 2.4GHz

5 dBi dipole antenna

WPA, WPA2, TKIP, AES

Power Input: 9 - 48VDC / 2W, 4-pin Terminal Block

Reverse Polarity Protection

IP30 sealed enclosure

DIN rail and wall mounting

Operating temperature: 0°C to 60°C

Weight: 1 kg

Dimensions: 26 x 95 x 75 mm

Wifi Uplink or Ethernet WAN connection
1 x LAN port
1 x RS232 / RS485 for Modbus RTU
1 x Digital input / 1 x Digital output
Roaming - field strength controlled
IEEE 802.11a/b/g/n/ac Wi-Fi
Supply voltage: 9 to 48 VDC
DIN rail
Operating temperature -20℃ to +60℃
Dimensions: 131 x 108 x 31 mm

Indoor Access Point, Gateway, Repeater, Super WDs
Ultra High Speed ​​AP With At the Atlictor Serving Users
Access Point, Gateway, Wisp, Repeater, Super Wds
Wave 2 Technology Increases the data amount to the individual User
Dual Band: 2.4GHz (300Mbps) / 5GHz (867Mbps)
High transmission power, adjustable
1 x RJ45 LAN with PoE + input
1 x RJ45 LAN
Supply voltage at non-PoE: 12VDC / 1.5A
Power Jack DC Input connector: 5.5 / 2.1 mm
2 x 2 5dbi built-in antennas
Transmission power: 100mW
Up to 50 users (Clients)
Dim: 186 x 186 X 36 mm
Operating temperature: 0 - + 40 ° C

Wifi AP, Client, Bridge, Repeater, Router
Industrial 2 x 2 Mimo
Qualcomm Atheros QCA9892
Supports IEEE 802.11 A / B / G / G / N / AC
2 x 10 / 100Base -Tx Wan / Lan-Port
TX Power 21 db to 2.4 GHz
TX Power 18 BB for 5GHz
WPA, WPA2, WPA3, WEP, TKIP, AES
Supply voltage: 9 ~ 48VDC In the 4-pin terminal block
protection against reverse polarity
IP30 protection
DIN rail or wall mountable
Operating temperature: 0 ° to 60 ° C
Dim: 162 x 110 x 46 mm

8 USB ports, 4x USB-A, 4xUSB-C

DIN mounting

USB 1.1/2.0 compatible

480 Mbps, high-speed USB 2.0

10/100 Base-T Fast Ethernet

Current protection 500mA

Network protocols supported: TCP/IP, Static IP, DHCP

Operating temperature: 0 to 55°C (32 to 131°F)

Power supply: 12VDC, 1.5A

CE, FCC

WLAN LINK - AP (auto WDS), AP (TDMA), Station (WDS/TDMA) and Station (ARPNAT)
Supports ATPC function to reduce mutual interference between the CPEs
WMM (Wi-Fi multimedia) gives higher priority to multimedia transmission
Coverage threshold to limit the weak signal from clients on the line
Real-time Wi-Fi channel analysis graph and client limit control for better performance
Supports Terminal Fast Roaming with 802.11k, 802.11v and 802.11r

EU standard frequency band network FDD-LTE/UMTS
SMS--Send/Receive/Delete
Wi-Fi 2.4Ghz 802.11g
Up to 10 users have access to WiFi
Nano SIM
5VDC 1A
Up to 150 Mbps MAX download speed
88mm x 28mm x 12.3mm / 25g

Serial device server with RS232 / RS485

RS232 via DB9

RS485 via screw terminal - 2-wire

Transient protection for 10/100/1000 Mbit networks

10kV to ground.

2 x RJ45 female.

Ground wire should be connected. 

Device server til multimode fiber med RS232/422/485 serieport

Directional antenna - yagi type
9 dBi outdoor logperiodisk
20 cm coaxial cable with N-type he
two bands 800-960 / 1700-2500MHz
Mast bracket with angle adjustment included

MiniGBIC/SFP optical transceiver

LC fiber cables

1310 nm

Up to 10 km, single mode

MiniGBIC / SFP optical transceiver
LC
1310nm
Up to 40 km Single Mode

External COM port via Ethernet and Internet - for fiber cable
SerialportServer 1 x RS232 / 422/485
Fiber is 100Mbit SFP (Single Mode or Multi Mode)

External COM port via Ethernet and Internet.

1-port RS-232 serial device servers

External COM port via Ethernet and Internet

Nport RS232 serielportserver 12-48VDC with extended temperature.

Netværkskort, Mini PCI Express Gigabit Ethernet Module

5 ports Unmanaged switch - MOXA EDS-205
10/100Mbit RJ45
Broadcast storm protection
DIN-skinne
-10 to 60°C driftstemperatur

8 x 10/100 / 1000Tx RJ45 (30W / port)
2 x 10/100 / 1000Tx RJ45
2 x 100/1000 SFP Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC > UL Class I, Division 2 Certified
Power Supply: 48 ~ 55VDC
Built-in Relay Output for Power Failure
IP30 Rugged Metal Case Design
DIN Rail and Wall Mounting
Operating Temperature STD: -40 ° to 75 ° C

Gigabit SFP USB 3.0 network adapter
SFP female and USB-A male
Powered by USB
OS Support: Windows XP / Vista / 7/8 / 8.1 / 10 32 / 64- Bit, Mac OS 10.6 ~ 10.13, Linux

Chipset: Intel®I350AM4
PCI Express * 2.1 (5GT / s), operable in x4 slots or greater to 4 x RJ45, Cat 5e or more
10/100/1000 Mbps
VLAN filtering, PXE remote boot, IPMI pass-through
Os Support: Win 7 / Win 8 / Win 8.1 / Win 10 32/64Bit, Spain DOS, Linux, FreeBSD, Novell UnixWare / OpenUnix 8
Operating temperature: 0 ~ 55 ℃

4 Port SATA PCIE Cards for each port up to 500MB / S to 4 individual ports (no raid)
Processor. Marvell 88SE9215
SATA up to 6.0 GB / S
Non-Raid

Compliant with Serial ATA 3.0
Marvel 88SE9230 processor to 4 x internal SATA connector
communication speed: 6/3 / 1.5 Gbit
Raid 0, 1, 10, Hyper duo
OS support : windoes XP / vista / server03 / server08 / win7 / 8/10 / dos / linux
Mirror data from SSD mechanical hard drives for databeskyttelske

Managed switch with Gigabit ports
8 x 10/100 / 1000BASE-T RJ45 ports with PoE +
Up to 36 watts for each PoE port
Total PoE power is 240Watt
2 x 100 / 1000BASE-X mini-GBIC / SFP
IGMP Snooping (Multicast)
Operating temperature: -20°C to 70°C
Can be wall mounted, magnetic wall mounted or DIN rail mounted
Supply voltage: 48-58DCV 5.7A max input (PSU not included)
Dimensions: 180 x 140 x 24.4mm
Weight: 686 grams

Cyper Security VPN Router with dual WAN failover
Managed
10/100/1000Mbit
3 x RJ45 LAN
1 x RJ45 LAN / WAN
1 x WAN
1 x USB 3.0
Auto Reboot for 5 seconds
VPN tunnels: max 60
VPN throughput: max 100Mbps
Encryption: DES, 3DES, AES, AES-128/192/256
Authen: MD5 / SHA-1/256/384/512
IPSec (Host to Host) / GRE / PPTP server / L2TP / SSL
Operating temperature: -40 - + 75 ° C
Dimensions: 135 x 88 x 50 mm
Weight: 530g
Supply voltage: 9 - 48VDC, 9Watt
DIN bracket, wall mounting

4-port 10/100 / 1000BASE-T RJ45 with IEEE 802.3af / 802.3at PoE injector
1-port 10/100 / 1000BASE-T RJ45 WAN port or LAN port interface (router mode or switch mode )
1 x USB 3.0 port for backing up and restoring configuration file
PoE power is 36Watt per port - automatically Detect PD
PoE monitoring, status, strømbudg PoE port enable / disable, PD live check
IP30 metal housing, DIN bracket
Operating temperature: -10 - + 60 ° C
Supply voltage: 48V ~ 56V DC (PSU purchased)
Supports IEEE 802.1Q / D
Security: port filter, MAC filter, IP source protection, anti-DoS
LCD touch display - field management, maintenance etc.

Top Grade Managed Poe++ switch - for large scale network
Managed switch, 24 x RJ45 with PoE++ (95W) on all ports simultaneously.
PoE power budget of 2280Watt. No compromise
Double plug-in power supplies
24 x RJ45 10/100 / 1000Mbit with PoE++
PoE extended to 200meter
2 x 10GBase-T slot for 10Gbit / 1 Gbit SFP Module Single Mode or Multimode
2 x 10GBase-SR / LR SFP + slots (combo with 2 x SFP / RJ45)
Layer 3 managed switch - Professional Grade
multi cast support
ERPS to Ring IP monitoring - recovery time less than 10ms
DHCP relay / DHCP Server
Supports Cisco ether-channel (static trunk)
Dimensions: 440 x 300 x 44 mm (1U)
Weight: 5,5kg
Operating temperature: 0 - +50°C

24 x 10/100/1000Mbit RJ45
4 x RJ45 1000Mbit shared with Port-1 to Port 4
4 x 10Gbit BASE-SR / LR SFP+ slots SFP
IP Stacking up to 6 units
Gigabit TP SFP and 10G SFP + interfaces
Hardware stacking up to 6 units
Switch series stacked in a logical unit
Stacking architecture supports redundant Ring mode 
IPv4 IGMP / IPv6 MLD snooping v1, v2 and v3
MVR (Multicast VLAN registration)
Ethernet Ring Protection Switching
Supply voltage: 100 - 240VAC, 21Watt
Dimensions: 440 x 280 x 44 mm (1U)
Operating temperature: 0 - + 50 ° C
DIN bracket

DNV GL Certified marine network switch
Non-managed 5 port network switch approved to vessels
5 x 10 / 100Mbit Auto-MDI / MDIX
Supply voltage: 18 - 30VDC polarity
Surge, surge protector DC input
Throughput: 148,880 pps at 100Mbit
Dimensions: 110 x 74 x 24 mm
Weight: 145g
Operating temperature: -40 - + 75 ° C
Moisture: 10-90% RH ( no condensation)
DIN fittings, metal enclosure

Det Norske Veritas Certified marine network switch DNV GL
Non-managed 5 port network switch approved for ships
5 x 10 / 100/1000Mbit Auto-MDI / MDIX
Supply voltage: 9 - 48VDC, 4Watt, polarity protected 
Transient, surge protector DC input
Throughput: 1,488,000 pps at 1 Gigabit
Dimensions: 110 x 74 x 24 mm
Weight: 160g
Operating temperature: -40 - + 75°C
Humidity: 10 - 90% RH (non-condensing)
DIN fittings, metal enclosure

Det Norske Veritas Certified marine network switch DNV GL
Managed 8 port network switch approved for ships
8 x 10/100 / 1000Mbit Auto-MDI / MDIX to 4 x 1000Mbit SFP single mode or multimode
Supply voltage: 12 - 60VDC, 18Watt
Surge rotection, over voltage protection DC input
Dimensions: 162 x 122 x 50 mm
Weight: 860g
Operating temperature: -40 - +75°C
Humidity: 10 - 90% RH (non-condensing)
DIN fittings, metal enclosure

Network Extender of RJ45 UTP patch cable
PoE transmitted in the cable from the PSE to the PD
1 x 10 / 100Mbit BASE-TX RJ45
Data rate: 94 - 30Mbps auto-optimization
Auto -negotiation / auto-MDI / MDI-X
PoE Standard: IEEE 802.3at / PoE of
Output: 48-56VDC max. 38 Watt
1 x RJ45 to VDSL + PoE
PoE pin: Pin 1/3/5/7 (+ ) 2/4/6/8 (-)
Distance: 100m m / PoE +, 500m w / PoE, without PoE 1000m
Powered by the 48-56VDC min. 2Amp

4-port 10/100 / 1000BASE-T RJ45 with IEEE 802.3af / 802.3at PoE injector
1-port 10/100 / 1000BASE-T RJ45 WAN port or LAN port interface (router mode or switch mode )
1 x USB 3.0 port for backing up and restoring configuration file
PoE power is 36Watt per port - automatically Detect PD
PoE monitoring, status, strømbudg PoE port enable / disable, PD live check
IP30 metal housing, DIN bracket
Dimensions: 180 x 140 x 25 mm | Operating temperature: -10 - + 60 ° C
Supply voltage: 48V ~ 56V DC (PSU purchased)
Supports IEEE 802.1Q / D
Security: port filter, MAC filter, IP source protection, anti-DoS

IP67 and IK10 Gbit PoE injector for outdoor mounting
PoE++ (60W) injector for PoE equipment
1 x RJ45 port for PoE++ out Data+PoE
1 x RJ45 port Data in
1 x Phoenix connector for the input voltage
DC24V 72W input
DC36V 71W input
DC54V 66W input
PoE standard: IEEE 802.3at/bt (PoE++)
PoE out Mid-span / End-span
Operating temperature: -40 - +75°C
Wall bracket
Dimensions: 170 x 73 x 44 mm
Weight: 425

Gigabit PoE splitter for indoor installation

PoE++ (60W) splitter with optional DC output for non-PoE equipment

DC output: 12VDC/5A or 19VDC/3.2A or 24VDC/2.5A

1 x RJ45 port for PoE++ in from switch or PoE Injector

1 x RJ45 port (data) for non-PoE equipment

1 x DC Jack connector (5.5/2.5mm) for equipment

PoE standard: IEEE 802.3at/bt (PoE++)

IEEE 802.3at (PoE+ Mid-span)

IEEE 802-3bt (PoE++ PoH HDBaseT) - type 4

Operating temperature: 0 - +50°C

Wall bracket

Additional DIN brackets

Dimensions: 94 x 70 x 39 mm

Weight: 265g

Surge Protection for 10/100 / 1000Mbit network
Review voltage: 5V / 300mA
review loss: Less than 0.2dB
2 x RJ45 female (in / out)
Protected Pin: 1 - 8 (data)
Threshold at 15V
Max Transient current: 5 - 15k Amp
Operating temperature: -40 - +70°C
Moisture: less than 90% RH
Size: 112 x 38 x 30 mm
Weight: 150g
Earth cable of more than 2.5kvmm must be shorter than 1 meter
Earth resistance must be less than 4 ohms
Nothing can protect against a direct lightning strike

Managed Gigabit switch 2 x RJ45, 2 x Fiber
4 x RJ45 10/100/1000Mbps
2 x SFP 100/1000Mbps
Support ERPS (Ring protection) 
IGMP/MLD Snooping (IPv4, IPv6)
Up to 256 VLAN groups
Support Cisco ether-channel (Static Trunk)
Port mirroring - up to 4 sessions
Supply voltage: 9 - 48VDC, 24VAC
Size: 135 x 88 x 32 mm
Temperature: -40 to +75°C
DIN-mounting

Transparent Ethernet connection up to 1200 meters
Medium range from 11 - 80 Mbps up to 1200 meters
Long range from 14 - 89 Mbps up to 700 meters
Range depends on cable quality etc.
Note: 2 pcs. to make a connection.
1 x RJ45 for LAN
1 x RJ45 for Link (RJ11 can also fit in the female connector
DIP switch to select Master or Slave mode
Dimensions: 97 x 70 x 26 mm
Cabinet: Metal
Weight: 189g
Supply voltage: 5VDC/2A
Temperature: 0 - +50°C

4 x 10/100/1G/2.5G/5GBASE-T Gbit RJ45 data input
4 x 10/100/1G/2.5G/5GBASE-T Gbit RJ45 data + PoE output
100~240VAC, 3.33Amp PSU with DC 52V~54V power output
Complies with 802.3bt PoE Plus Plus end-span and mid-span PSE
Backward compatible with IEEE 802.3at PoE Plus end-span/mid-span PSE
Up to 4 IEEE 802.3at/IEEE 802.3bt PoE devices powered
4 x PoE ports with 90-watt 802.3bt PoE++ type 4 PSE or 95-watt PoH PoE injector function
4 x PoE ports support 802.3at end-span/mid-span PoE+ 36-watt injector function
DIP switch for 802.3bt, PoH and Force mode selection
Auto detects if devices can be PoE powered (PD)
Circuit protection prevents power interference between ports
Forwards both Ethernet data and PoE power to remote device over a 100-meter distance
EEE 802.3 Ethernet, IEEE 802.3u Fast Ethernet., IEEE 802.3ab Gigabit Ethernet
IEEE 802.3bz 2.5G/5GBASE-T, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
Dimensions: 94 x 70.3 x 39.2 mm
Weight: 275g
Enclosure: Metal case

PoE++ splitter - separate DC and Data
Data without PoE to equipment
DC voltage output to non-PoE device
Max. 70 Watt
Data is 10/100/1000Mbit/s
PoE 802.3at/bt
End-span + Mid-span
End-span or Mid-span
2  x RJ45 interfaces
1 x RJ45 port Data + Power input
1 x RJ45 port Data output
2 x DC output (4-pin terminal block)
DC output 12VDC or 24VDC w/DIP switch
Size: 135 x 88 x 32 mm
DIN-mount
Weight: 445g

4 x 10/100/1G/2.5GBASE-T RJ45 copper ports
2 x 10GBASE-SR/LR SFP+ slots, compatible with 1G/2.5GBASE-X SFP
1 x RJ45-to-RS232 console interface for basic management and setup
DC 9 to 48V input or AC 24V input
DIN-rail and wall-mountable designs 
IP30 aluminum case
Temperature -40 to +75 degrees C
2 x digital input (DI)
2 x digital output (DO) 
Integrates sensors into auto alarm system
Transfers alarm to IP network via email and SNMP trap
IPv4 dynamic routing protocol supports RIPv2 and OSPFv2 
IPv6 dynamic routing protocol supports OSPFv3
IPv4/IPv6 hardware static routing
Supports G.8032 ERPS (Ethernet Ring Protection Switching)
IEEE 1588v2 PTP (Precision Time Protocol) transparent clock mode
Supports IPv4 IGMP snooping v1, v2 and v3
Supports IPv6 MLD snooping v1 and v2
Switch Management Interfaces
SNMP Management

PoE++ power supply via Ethernet cable, up to 60 Watt
LAN without PoE in, gives LAN with PoE out
PoE++ 48-53VDC/60W
Mid-span and End-span give 60Watt
For 100/1000/2500/5000Mbit networks.
Power is supplied from 48 - 54VDC
Temperature range: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
DIN mount