Network products / Wifi / PoE / RJ45-Fiber

Please note this product is EOL and of older vintage. We only recommend it to users who have experience with old analogue model/telephone technology.

If you don't have experience with the older technology, don't jump into it, that's our recommendation.

5 x 10/100 / 1000Mbps Ethernet ports + 2 x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane ( Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature Range: -40 to 75 ° C

5 x 10 / 100Tx RJ45 Fast Ethernet
M12 (D-coded female) Connector IP67 Protected
IP67 Plastic Case Design
RJ45 Port Support Auto MDI / MDI-X
Auto Negotiation Speed, Half / Full Duplex
Store-and-Forward Switching Architecture
Supply Voltage: 12 ~ 48VDC
Power Polarity Reverse Protection
Overload Current Protection
DIN Rail or Wall Mounting
Dimensions: 37.13 x 215.73 x 32.8 mm (W x H x D)
Operating temperature: STD: -10 ° C to 70 ° C

16 RJ45 Ethernet ports
10/100/1000 Mbps with auto-adjusting MDI/MDI-X
DIN-rail and wall-mounting
Metal enclosure rated at IP30
Dual power input for redundancy
8K MAC address table
Working tempeture -40 to 75 C degrees
12 to 48VDC input

2 x 10/100 / 1000BASE-T RJ45 IEEE 802.3bt PoE ++ output
2 x SFP slot 1000BASE-X and 100BASE-FX TC-dual mode
SFP module is as standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase 100Mbit / Gigabit SFP modules.
PoE++ power up to 95 watts of PoE
Provides 54VDC of the RJ45 Ethernet cable for devices with Ethernet PoE port
Automatic detection of IEEE 802.3bt equipment - does not protect PoE equipment at damage
IEEE 802.3af / at / bt splitter devices compatible
DIP switch: Selecting the standard / Legacy mode
DIN rail and wall mounting
12 - 56V DC redundant power with reverse polarity protection Power supply
purchased
Dimensions: 153 x 85 x 55 mm
Operating temperature -40 to +75°C

Modbus over the Ethernet or Internet
MODBUS server with 1 x RS232 and 1 x 422/485
Can run Device to Device
0/100 Mbps Ethernet port, auto MDI / MDIX, 10/100 auto, 1500V magnetic insulation only on
RS485 RS232 Modbus ASCII / RTU port, 1 RS422 / 485 Modbus ASCII / RTU port, 16V / 400W TVS isolated, RS485 automatic line control
9 ~ 30VDC power input, IP30 enclosure , DIN rail mounting structure, USB port (Modbus serial port expansion and capture of memory)

CAN Bus to USB Tester
Interface: Open 6
2 x CAN Channels
CAN Standard: ISO 11898, Can 2.0a, Can2.0b
CAN Baudrate: 5K - 1Mbps and most widely used Baud Rate
Isolation: 1500V
USB: 1.1, 2.0
Support Software: _CAN Tools, CAN Test, CAN Pro.
Operating System: Windows 2000 / XP / 2003/7/8/10
Supports VC, VB, C #, LabVIEW, LabWindows, Delphi7 OA
Operating temperature: -40 - + 85 ℃
Measure: 103 x 64 x 23 mm

Managed Gigabit switch 2 x RJ45, 2 x Fiber
4 x RJ45 10/100/1000Mbps
2 x SFP 100/1000Mbps
Support ERPS (Ring protection) 
IGMP/MLD Snooping (IPv4, IPv6)
Up to 256 VLAN groups
Support Cisco ether-channel (Static Trunk)
Port mirroring - up to 4 sessions
Supply voltage: 9 - 48VDC, 24VAC
Size: 135 x 88 x 32 mm
Temperature: -40 to +75°C
DIN-mounting

Chipset: Intel®I350AM4
PCI Express * 2.1 (5GT / s), operable in x4 slots or greater to 4 x RJ45, Cat 5e or more
10/100/1000 Mbps
VLAN filtering, PXE remote boot, IPMI pass-through
Os Support: Win 7 / Win 8 / Win 8.1 / Win 10 32/64Bit, Spain DOS, Linux, FreeBSD, Novell UnixWare / OpenUnix 8
Operating temperature: 0 ~ 55 ℃

Wireless WIFI 3G / 4G Router.
Built-directional antenna to 3G/4G.
Built-in WiFi antennas.
2 x cable entry IP tight.
2 x LAN 10/100/1000 Mbps Ethernet
Power supply: 12V ~ 24V Passive PoE (POC)
18VDC / 1A Passive PoE adapter included
Downlink of 150 Mbps Uplink of 50Mbps
Mast clamp / wall
Temperature: -30 ° ~ +70°C

10Gbit fiber the RJ45 Media converter
For Single Mode or Multi Mode SFP module
Extended temperature range
1 x RJ45 10G/5G/2.5G/1G/100M BASE-T
1 x 10GBASE-SR/LR SFP slot
The SFP module is standard with an LC connector
Additional SFP module
Supply voltage: 12 - 48VDC
PSU not included
Operating temperature -40 to +75°C
YOUR bracket

Unmanaged Gigabit industriswitch med 4 x RJ45 10/100/1000
2 x SFP - 100/1000Mbit
12 - 48VDC, 7,2Watt

Outdoor Robust Dual Band Access Point etc.
AP, Gateway, Repeater, WDS, Wisp
2.4GHz and 5GHz, 600 / 1200Mbit (1800Mbit)
Max. 8 SSID (4 per radio), 150 (100) Clients
1 x RJ45 Gigabit Port PoE+ PD
IEEE 802.11ac 2T2R - Wave 2
Up to 20dBm (EIRP)
4 x N-female connector
IP67 Molded aluminum cabinet for mast mounting
Operating temperature: -40 - +70°C
real-time WiFi channel Analyzer
Dim: 295 x 231 x 80 mm
Weight: 2.5kg
Supply: POE, 48V / 0.5A (PoE+)

5 x 10/100 / 1000Mbps Ethernet ports + 1 x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store and Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature range: -40 ° to 75 ° C

Wifi CAN converter. CAN CAN bridge. CAN PC
two CAN channels
AP mode and station mode
Compatible with Socket (TCP Server, TCP Client, UDP)
Support: Ethernet, ARP, IP, ICMP, UDP, DHCP, DNS TCP)
DIP switch for terminating
Isolation: 1500VDC
CAN baud rate: 5kbit / s to 1Mbit / s
Wifi: 2.4GHz IEEE802.11a / b / g
Supply voltage: 9 - 30VDC
Consumption: 80mA @ 24VDC
Dimensions: 118 x 94 x 23 mm
Operating temperature: -40 - + 85 ° C

Dual-band 802.11 b/g/n/ac WiFi
4 x Gigabit LAN
2 x Redundant SIM slots
Operating temperature: -30 ~ 75 ℃
DC +7.5~32V
Cloud M2M Management Platform
DIN Rail Mounting
Shock and vibration resistant
VPN, Firewall

4 x 10/100 / 1000Mbps Ethernet ports + 1 x 100 / 1000Mbps SFP slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric )
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature range: -40 ° to 75 ° C

1 x 10/100 / 1000BASE-T RJ45 IEEE 802.3bt PoE ++ output
2 x SFP slot 1000BASE-X and 100BASE-FX TC-dual mode
PoE Power up to 95 watts to PoE port
Provides 54VDC of the RJ45 Ethernet cable for devices with Ethernet PoE port
Automatic detection of IEEE 802.3bt-equipment United Protects devices from being damaged by incorrect installation
Remove Power supply up to 100 meters
IEEE 802.3af / at / bt splitter devices compatible
Layer 2 features
DIP switch: Selecting the standard / Legacy mode
IP30 metal housing
DIN rail and wall mounting
12 - 56V DC redundant power with reverse polarity protection
power supply not included
Operating Temperature -40 to 75 ° C,

5 x 10/100 / 1000Mbps Ethernet ports + 2 x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane ( Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature Range: -10 - 70 ° C

24-ports PoE strømforsyning 30 W, 10/100 Mbit

Moxa Industrial Managed Switch ED6008

Wireless Com Port - Can Peer-to-Peer connection
IEEE 802.11 a/b/g/n
2.4 GHz, 5 GHz Dual Band
1 Port RS232 or RS422 or 2-wire RS485
Max.Baud Rate: 921.6 Kbps
Operating temperature: -40 - +85°C
with COM Port Re-Director, TestView
± 15KV IEC ESD protection
Supply voltage: 5 - 12VDC / 2W
infrastructure, Soft AP, Roaming
sWifi config Mobile App for Android

Outdoor robust Dual Band Access Point etc..
AP, Gateway, Repeater, WDS, Wisp
2.4GHz and 5GHz, 300 / 867Mbit (1200Mbit)
Max. 8 SSID (4 per radio), 64 clients
1 x RJ45 Gigabit Port PoE PD
IEEE 802.11ac 2T2R - Wave 2
Up to 20dBm (EIRP)
4 x N-hona plug
IP67 Diecast aluminum cabinet for mast mounting
Operating temperature: -40 - + 70 ° C
Real-time WiFi channel Analyzer
Dim: 295 x 231 x 80 mm
Weight: 2.3kg
supply : PoE, 48V / 0.5a (PoE+)

5 x 10 / 100Mbps Ethernet ports + 2 x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric )
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature Range: -40 - 70 ° C

5 x 10/100 / 1000Mbps Ethernet ports + 1 x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature range: -10 ° to 70 ° C

1000 meter - network extender over coax cable.
Poe transferred in cable
1 x 10 / 100mbit base-TX RJ45
Auto-Negotiation / Auto-MDI / MDI-X
Poe Standard: IEEE 802.3AT / BY
PoE Output: 48-56VDC Max. 25 Watt
PoE Mode: End-Span, RJ45 Pin 1/2 (+), 3/6 (-)
1 x BNC Hun - RG59 Coax
Max. Distance: 200m w / Poe +, 1000m w / Poe, 1600m without Poe
Power supplied from 48-56VDC min. 2amp

8 x 10/100/1000Mbit - RJ45 med auto MDI/MDI-X
2 x SFP slot 100/1000Mbit fiber port
IP30 metalkabinet 
DIN rail og vægmontering
Redundant Power input
12 til 48VDC, redundant, med polaritetsbeskyttelse
AC input 24VAC power input er mulig
6000VDC Ethernet ESD beskyttelse
Udvidet temperatur -40 til 75°C
IEEE 802.3az

4-port 10/100 / 1000BASE-T RJ45 with IEEE 802.3af / 802.3at PoE injector
1-port 10/100 / 1000BASE-T RJ45 WAN port or LAN port interface (router mode or switch mode )
1 x USB 3.0 port for backing up and restoring configuration file
PoE power is 36Watt per port - automatically Detect PD
PoE monitoring, status, strømbudg PoE port enable / disable, PD live check
IP30 metal housing, DIN bracket
Dimensions: 180 x 140 x 25 mm | Operating temperature: -10 - + 60 ° C
Supply voltage: 48V ~ 56V DC (PSU purchased)
Supports IEEE 802.1Q / D
Security: port filter, MAC filter, IP source protection, anti-DoS

8 x RJ45 PoE + 36W Gigabit
2 x SFP 100/1000 Mbit
10K Jumb frames
2M Packet Buffer
16K MAC address table
-40 to + 75 ° C

4 x 10/100/1G/2.5G/5GBASE-T Gbit RJ45 data input
4 x 10/100/1G/2.5G/5GBASE-T Gbit RJ45 data + PoE output
100~240VAC, 3.33Amp PSU with DC 52V~54V power output
Complies with 802.3bt PoE Plus Plus end-span and mid-span PSE
Backward compatible with IEEE 802.3at PoE Plus end-span/mid-span PSE
Up to 4 IEEE 802.3at/IEEE 802.3bt PoE devices powered
4 x PoE ports with 90-watt 802.3bt PoE++ type 4 PSE or 95-watt PoH PoE injector function
4 x PoE ports support 802.3at end-span/mid-span PoE+ 36-watt injector function
DIP switch for 802.3bt, PoH and Force mode selection
Auto detects if devices can be PoE powered (PD)
Circuit protection prevents power interference between ports
Forwards both Ethernet data and PoE power to remote device over a 100-meter distance
EEE 802.3 Ethernet, IEEE 802.3u Fast Ethernet., IEEE 802.3ab Gigabit Ethernet
IEEE 802.3bz 2.5G/5GBASE-T, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
Dimensions: 94 x 70.3 x 39.2 mm
Weight: 275g
Enclosure: Metal case

8 ports 10/100/1000Mbps Fast Ethernet switch
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
16Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -40° til 75°C

Function LTE-based WAN expansion for various IP networks

Applications Enterprise, surveillance, WiFi hotspots

Dual SIM For ISP fail-over

Web-UI Basic settings, CLI and Command Script for advanced settings

Ethernet Ports 1 configurable WAN & 2x Fast Ethernet

Includes WiFi support

Micro-SD Slot for log storage

Power Input DC 5-18V

Operating Temperature -30°C ~ 70°C

Weight 220g

Dimensions 93x90x27mm

5 x 10 / 100Mbps Ethernet ports + 2 & nbsp; x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric )
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature Range: 0 - 70 ° C

2 Way Power Splitter / Combiner
Kan splitte radiosignalet til 2 antenner
Ofte anvendt til Panel-antenner
1 dB insertion loss

4 x 10/100 / 1000Mbps Ethernet ports + 1 x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric )
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature range: -10 ° to 70 ° C

REMAINDER SALE

4 x 10/100Mbit RJ45 Managed switch with PoE+
2 x 10/100Mbit RJ45 redundant uplink ports
DC 48V Power Input (power supply not included)
Up to 25 Watts per port
Max. 80 Watt total power
Multiple Super Ring technology (MSRTM), 5ms recovery time
Dual Homing (RDHTM)
IGMP snooping multicast
Built-in hardware watchdog timer for system auto-reset
-40~60°C operating temperature

100 Mbit PCI-Express Fiber Card with LC connector Low Profile

2 ports 10 Gbit PCI-Express netkort med SFP+ og CX4

10GBase-BX SFP optical transceiver
To 1-Simplex fiber cable
1 x LC Single Mode 1-core cable
0 ~ 60 ° C
Up to 20km
TX: 1270nm , RX: 1330nm
Note: Reverse TX / RX frequencies at the other end of the fiber

10GBase-BX
Single Mode
0 ~ 60°C
Op til 20km
TX: 1330nm, RX: 1270nm

For the interconnection of single mode and multimode fiber networks
1000Base-SX to 1000Base-LX, SM, 850/1310 nm
only to Gigabit fiber networks.

Managed Gigabit switch til rack montering
8 x RJ45 port 10/100/1000
2 x 100/1000X SFP module
RS-232 DB9 interface for management og setup
110-230VAC indbygget

1 x 10/100 / 1000Mbit RJ45
1 x 100 / 1000Mbit SFP
SFP module is as standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase 100Mbit / Gigabit SFP modules.
POE (PSE) up to 95W
48-56 VDC
IP30 rated
-40 ° C to + 75 ° C
5% to 95% humidity
DIN bracket

QR8041

2x Gigabit Ethernet Port
802.11n/ac Wi-Fi
4G/WAN Failover
Cloud M2M Management Platform
Shock and vibration resistance
DC +7.5~32V
Operating temperature :-30~75℃
VPN, Firewall

8 ports 10/100/1000Mbps Fast Ethernet switch
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
16Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -10° to 70°C

Modular design for easy replacement
Supports 10M/100M/1G/2.5Gbps Ethernet
Supports 802.3af / 802.3at / 802.3bt / UPoE
Protects 8 wires of network cable, including PoE
Protects Up to 20KV / 10KA wave
Error indicator LED
Operating temperature from -40°C to 85°C
DIN rail mounting

1000 Mbit/s netkort til lysleder m. SC stik 3,3 V PCI, 64 bit

8 Ports Managed Switch With Fast Recovery and Ring
Erps (Ethernet Ring Protection Switching)
8 x RJ45 10/100/1000Mbit Switch
Store and Forward Architecture, Broadcast Storm Checking
1.5mbits SRAM Packet Buffer
Automatic Address Learning and Address Aging
Supply paging: 12 - 48VDC or 24VAC

8-ports managed switch