Video extender, AV splitter, AV/ converter, Video Wall

HDMI, HDCP and DVI compatible 32 x 32 MATRIX
Modular - input and output modules
Input and output modules can be mixed and added to 8 × 8 input module and output module
4 input and 4 output modules with HDMI, DVI
VGA module is only input
Supports a wide range of PC and HDTV resolutions from VGA to WUXGA
480i to 1080p and 4K2K @ 24/25/30 Hz
Control of the matrix via the front panel, RS-232, Telnet, WebGUI controls
10 available preset settings
3 EDID modes: Standard, Dynamic and Manuel
Power supply with redundancy
HDMI cable up to 15 m
HDbaset 5Play ™ convergence support HD video, HD audio, PoC
Ethernet and IR / RS-232 control

Controller / video wall / splitter
Input: 1x Display Port, 1x HDMI + 1 Loopout, 1x DVI
Output: 4x HDMI
Supports HDMI, DVI, Display Port, VGA and YPbPr signals
4K / 2K HDMI
4K image split in 4 x HDMI outputs
PIP (picture in picture) and POP (side by side) multi function
HDMI audio
Supports YPbPr video via VGA input port as well as DVI-D, VGA & amp; HDMI by DVI-I input port
High end 3D motion
Managing via remote or RS232port

DVI-D og USB2.0 KVM-extender over netværkskabel
Punkt-til-punkt DVI-video og USB
Op til 100 meter over et enkelt CAT 5e / 6 / 7-kabel
Ukomprimeret HD-video med 1920 x 1200 opløsning
24-bit farvedybde
USB 2.0 op til 40 Mbps
ExtremeUSB® extender
Transparant USB overførsel
Maks. forsinkelse er op til 1ms
Plug and Play; ingen softwaredrivere kræves
Fungerer med operativsystemer fra: Windows®, OS X® og Linux®
Monteringskit: gør det muligt at montere enheder på vægge, skriveborde eller 19″ stativer.

4 x HDMI inputs to 4 x HDMI outputs
Viewing the screens 4 are summarized on a screen
display screen 1 distributed over 4 skærme
Can used with DVI adapters

Video Bandwidth: 225 MHz / 6.75 Gbps to 8 x HDMI female 
Resolutions: 480i to 1080p
Audio: LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
Sampling frequency of audio: 32 ~ 192 kHz
Outputs 8 x HDMI
8 x uncompressed AV and data

DisplayPort KVM extender, 4K@30Hz and HD
100 - 150 meters with Cat. 6a patch cable (need good quality cable!)
4 x USB 2.0 ports on remote module
1 x USB B on local module
Transparent USB for K/M, USB drive, HDD etc.
4K@30Hz, 1080p@60Hz etc.
Independent two-way audio transmission
HDCP Compliant and Blu-Ray
Point-to-point cable connection
HDBaseT 2.0: Good EMI immunity
Supply voltage: 5VDC / 2A PSUs included
Dimensions: 110 x 110 x 30 mm
Operating temperature: -10 - + 45°C

HDMI KVM transmitter / receiver over networks
set with 1 x Transmitter and 1 x Receiver
with USB - Works with Touch screen
4K UHD HDMI over IP connection
Networkswitch must be with IGMP Snooping
Up to 120m Via Single RJ45 Cat 6 - Point to Point
Up to 60km (Single Mode) via Fiber Cable - Buying SFP Module
USB2.0 - Keyboard, Mouse and Touch screen, USB Memory, etc.
a transmitter to multiple recipients, multiple transmitters for multiple recipients
The devices can be used for Video Wall (8 x 16)
HDCP 1.4 Compatible
2 x 5VDC 1A Power Supply included

Display of 4 screens assembled on one screen
More image combinations
Remote control
4 x HDMI inputs
1 x HDMI output 1080p
PIP and POP functions
hot-Preset keys, IR remote
Can be controlled from the RS232, Telnet and push buttons on the front

8 channel HDMI input module for Video MATRIX 
Video bandwidth: 225 MHz / 6.75 Gbps
Input ports: 8 x HDMI
video resolutions: 480i to 1080p @ 60Hz
Audio LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
Sampling frequency of audio: 32 ~ 192 kHz
integration module - plug-in

Perfect table box to the meeting room for viewing on a large screen
can be mounted under the table
6 x video inputs selected for 1 x output
4 x HDMI input
1 x DisplayPort
1 x VGA + audio
1 x HDMI output for local monitor
1 x RJ45 for remote receiver with HDMI out (extras)
Sending of CAT6a cable up to 100m in HD 1080p
4K UHD (3840 x 2160) up to 70m
Front panel push button and IR remote control or serial or GUI control
EDID and HDCP function
USB 2.0 port for Pass Through
Size: 135 x 100 x 40 mm

Suitable for the service technician
For Servers, embedded PCs that are not connected to KVM
A laptop will now be screen, keyboard and mouse.
Box has input for VGA
Box has USB output for emulation of keyboard and mouse.

High End DisplayPort Extender
Resolution Up to UHD 4K, 3840 x 2160 @ 30Hz
single cable, CAT 6A up to 100 m
point-to-point connection
Plug and Play; No software drivers required
with Edid
supply voltage: 12VDC - Both TX and RX
can power the other device over the patch cable
Dim: 102 x 66 x 30 mm

Sender and receiver for the transfer of DVI signal up to 1.2 km via fiber optics
SC Multi Mode fiber cable PC and monitor
Also transmits audio signals to microphone and speaker
REMAINING STOCK - limited quantity

16 port 4K HDMI Multi-Viewer
16 x HDMI in with 1080p
1 x HDMI out 4K @ 30Hz
HDMI 1.4, HDCP 1.4, DVI 1.0
PIP, PAP, Full Screen, Dual Mode and Quad Mode
Change via pushbutton or IR

4K HDMI Extender over the patch cable
PoC (Power Over Cable) - Power supply to be one party TX or RX
2.0b HDMI / HDCP 2.2 / 1.4
up to 120 meters
4096 x 2160 @ 60Hz (120m), 1920 x 1080 @ 60 Hz (150m)
4K @ 50 / 60Hz 4:4:4
1080p @ 120Hz
Remote-IR in both directions
TX: HDMI in, HDMI out, IR Input + out (3.5mm jack), DC in, RJ45, RS232
RX: HDMI out, audio out, IR Input + out (3.5mm jack), RJ45, RS232
Plug and Play
Power supply: 24V 1A (1 pc included)
Dimensions: 157 x 90 x 20 mm | Weight: 333g
Operating temperature: 0 - + 40 ° C
Humidity: 20 - 90% RH (no condensation)

4K HDMI / USB video transmitter PoE over LAN
Suitable for Video wall
Use Multi casting switch (IGMP Snooping)
1080p power. 4K (3840 x 2160) HDMI Resolution
HDMI 1.4a - approx 0.5 sec Transmitter and Receiver Slow
1 x RJ45, 1 x DB-9 female, 1 x HDMI female, 1 x VGA DB-15 female
1 x USB 2.0 Type B (PC / Server)
Can be packed up to 8 x 16 video wall
Send and Receive Choices - 16 Channels (DIP)
Supply: IEEE 802.3af / at PoE +; 12V DC 2A (not supplied)
Range up to 100m over direct Cat. 5e / 6 UTP cables
EDID emulation and & nbsp; IR transfer
As receiver, use HDMI-MULTI4K-R

Transmits DVI video and audio signals up to 120m over a single CAT6 cable
Supports resolutions up to 1920*1080@60Hz
Supports keyboard and mouse signal transmission
A cable can transmit several signals simultaneously
Transmission distance: CAT 6 120m or TCP/IP
LAN diode flash at link
Plug and play support without any settings
Including DC12V/1A power supply
Size: 164 x 85 x 25 mm
Weight: 2 x 220g
Temperature: 0 - +50°C

4K HDMI/USB video receiver PoE over LAN
Suitable for Video wall
Use Multi casting switch (IGMP Snooping)
1080p or 4K (3840 x 2160) HDMI resolution
HDMI 1.4a - approx. 0.1 second delay between transmitter and receiver
1 x RJ45, 1 x DB-9 female, 1 x HDMI female
4 x USB 2.0 type A (mouse/keyboard/USB touch)
Can be fitted up to 8 x 16 video wall
Transmitter/receiver selector - 16 channels (DIP)
Supply: IEEE 802.3af/at PoE+; 12V DC 3A (not included)
Range up to 100m over direct Cat. 5e/6 UTP cables
EDID emulation and IR transfer
As transmitter, use HDMI-MULTI4K-T

4 x HDMI inputs to 1 HDMI output
The four inputs can be combined into 10 variants
Seamless switching of HDMI signal
Supports Audio switching
Resolution: up to 4K @ 30Hz input
supports IR remote control
Buttons on the front to output mode selection
Bandwidth: 6.75Gbps
Operating temperature: 0 - + 40 ° C
Supply voltage: 12VDC PSU included
Consumption: 8Watt
Cable Distances, max .: 8m Input, output 10m
Dimensions: 191 x113 x 17 mm
Weight: 480g

HDMI Matrix over IP.
Video Wall configuration
Setup with DIP switches (TX-RX Pair)
Max 24 transmitters and 96 receivers (contact us for buying TX or RX units separately.) < br> HDMI 1.3, HDCP 1.3.
HDMI loop out to the local monitor
Resolution 1080p @ 60/50/30/25 / 24Hz, 720p @ 60 / 50Hz.
point to point over Cat 6. Maximum . 100meter. Point to many Hotels can be supplied via PoE (802.3af) or 12VDC 1A (PSU included).
Power Consumption: 2.5W.
Switch must support protocol: IGMP Snooping or IFMP.
Delay: 120ms
Operating temperature: 0 ~ 40 ° C.

Convert from CGA or EGA or MDA-DB9 male - to VGA
Use a PS2 keyboard for video adjustment - Not included
Equipment with CGA and EGA does not always meet the standards
Purchase DC12V / 5A-RQ power supply

MUST be configured !!

Opløsning op til 1080p@60Hz.
Signaldistribution op til 70M.
Der kræves ingen ekstern strøm til RX -enheden.
Indbygget HDMI loop out-port på TX-enhed til en ekstra HDMI-skærm.
Kan stakkes til en anden TX for 1 in 8/12 out.
Understøtter RS232, CEC, EDID -styring.
Understøtter RS232 -kontrol.

Indgange: DVI-I, VGA, Composite eller Component
Udgang: DVI-I (DVI-D og VGA) med specialkabel
2 indgangssignaler vises på 1 skærm.
Fjernbetjening medfølger med flere billede-funktioner
Flip, zoom, pan, resize etc.

VGA to DVI-D (Digital)
Component for DVI-D
Analog input: 1920 x 1200 @ 60Hz
DVI-D output HD: 1920 x 1080p
With EDID

Playback of photo, video and music files
Autoplay function
Storage media: SD (HC) or USB connector (not supplied)
Connectivity for up to 6 buttons
Connection to motion sensor
1 HDMI cable included standard
Power consumption 12V / 1.5A
1920 * 1080P (HD)

Composite Video, BNC, over Single Mode 9/125my fiber cable
Set consists of transmitter and receiver module
Only single fiber (simplex) is used for digital transmission
Feel free to use normal duplex fiber cable, where one fiber is not used
Up to 10km between transmitter and receiver
Stand-alone or rack mounting

Max. 1920 x 1200 pixels
1 x KVM Extender Console Unit - Remote module
1 x KVM Extender Computer Unit - Local module
1 x 12V DC Power supply included for remote module
1 x KVM cable ( VGA)
USB (2 on Console Unit, 2 on PC Unit)
Only VGA and USB Mouse / Keyboard Transfer
Does Not Transmit Touch from Monitor
USB is only for mouse and keyboard
For point RJ45 network cable up to 200 meters
with Edid Emulation
2 controls for the same PC
Video adjustment

Fordel: Velegnet til Digital Signage.
Med VGA-NDSP-WLAN fortsætter info-tavlen med at virke, selv om netværksforbindelsen fejler.

8 x HDMI inputs to 1 HDMI output
The 8 inputs can be combined into 10 variants
Seamless switching of HDMI signal
RJ45 output for remote HDMI receiver
Supports Audio switching
Resolution: up to 4K @ 30Hz input
IR remote control for output mode selection
Bandwidth: 6.75Gbps
Operating temperature: 0 - + 40 ° C
Supply voltage: 12VDC PSU included
Consumption: 12Watt
Cable Distances, max .: 8m Input, output 10m
Dimensions: 367 x113 x 17 mm | Weight: 680g

Copy a DP video input to 4 DisplayPort outputs
DisplayPort Up to 4K 60Hz, QHD (2560x1440) and FHD (1920 x 1080)
Output Port Support DP ++ (Dual-mode DisplayPort)
DP ++ can broadcast HDMI signals using passive adapter
Automatic EDID configuration
Incorporate EDID and HDCP handling procedures for continuous video output
support over 100 solutions
HDCP 1.4 compatible
DP 1.3 
Dim: 108 x 87 x 20 mm

VGA Extender over TCP / IP or Point to Point.
Up to 200 meters over CAT 5e / 6 patch cable.
1920 x 1080 @ 60Hz
3.5mm Audio
USB for keyboard and mouse only!
Audio frequency: 32kHz, 44.1kHz, 48kHz
Sound format: DTS-HD / Dolby true HD / LPCM7.1 / DTS / DSD
Operating temperature: -5 ~ 70 ° C
Dimensions: 104 x 92 5 x 24 mm

300 MHz (-3 dB) RGB video bandwidth
Compatible with VGA-QXGA and HDTV component video signals
Buffered throughput for input 1
ID bits from inputs 1 and 2 are routed to the output
Auto-input switching
Contact closing of remote control
REFURBISHED!

Sends audio/video wirelessly to the recipients

Use: Computer, screen, DVD player, television, TV box, camera

Function 1: Wireless transmitter and receiver

Function 2: Wireless extender

Feature 3: Video Converter

Feature 4: Screen Share mirroring

Transmitter HDMI ports: 1x local output (female), 1x input (female)

Receiver HDMI ports: 1x output (female)

Infrared remote control

Contains a transmitter and a receiver

Supports up to 4 receivers (reduces the range per increased number of receivers)

For additional receivers, see product number: "HDMI-WIFI-MULTI+R"

DisplayPort booster up to 70 meters
Via RJ45 CAT5e / 6
4K @ 30Hz / 4: 4: 4 at 40 meters
1080p @ 60Hz 16bits at 70 meters
Audio: up to 7.1 LPCM 192KHz / Dolby TrueHD / DTS-HD MA
1 x DisplayPort
1 x RJ45
1 x DC 5V 2A to each unit 
Operating temperature: -10 to 45 ℃
Dimensions: 92 x 69 x 25 (mm)
Weight: 160g (Sender)
Weight: 180g (receiver)

Video Encoding: Supports HEVC/H.265 and MPEG-4/H.264 AVC.
High Resolution: Maximum of 1920x1080P at 60fps.
Input: HDMI with built-in audio and external audio via a 3.5mm jack.
Multi-streaming: Outputs up to 4 video streams simultaneously.
Protocols: Compatible with HTTP, RTSP, RTMP(S), SRT, HLS, ONVIF, UDP, and RTP.
Remote Management: User-friendly web page control for wide-area network access.
OSD Settings: Add logos and text to the displayed video.
Build: Durable aluminum shell for longevity.
Audio Encoding: Supports AAC and G.711 standards.
Upgradable: Supports firmware upgrades for enhanced features.

HDMI video transmitter PoE
Suitable for video wall
With HDMI Loop Out
Delay of approx. 1 second from transmitter to receiver
HDMI 1.4a - H.264
By IP multicast use switch with IGMP Snooping
Range up to 100m
Cables Kat. 5th / 6
EDID Emulation
IR Transfer
1 x RJ45, 1 x DB-9, 1 x HDMI Input, 1 x HDMI Output
Supply IEEE 802.3af / at PoE +; 5V DC, 2A (not supplied)
As receiver, use HDMI-MULTI-HD-M

From 1 SDI port to 3 SDI outputs
Same picture on the 4 monitors
Compatible with SD-SDI, HD-SDI and 3D-SDI
5 x BNC female
1 x BNC - SDI input
4 x BNC - SDI output
Input: up to 1920 x 1080 points
Power supply included 5VDC / 2.6A

Duplicate one DVI-DL+ Audio input to multiple DVI-DL+Audio outputs
Support up to 2560 x 1600 resolution
Automatic power-saving when DVI input is lost
EDID Copy function ensures accurate output display
Read and store the EDID from the connecting display to the video extension system
Compatible with most of the popular screen resolution to XGA, SXGA, UXGA, WSXGA ….Full HD, WUXGA system.
Simple LED indicatior makes operation userfriendly
Plug-n-Play system configuration
Alternatively perform the default or the copied EDID for the connected display device
Unique DVI-SL / DVI-DL Switch for accurate EDID configuration

HDMI to SDI converter up to 300 meters depending on resolution
SDI standards: SD-SDI, HD-SDI and 3G-SDI
Power supplied 5VDC / 2.6A
Can also be used from DVI D for SDI (no sound)
When DVI-D is used kable with DVI and HDMI connectors

DisplayPort (DP) Cable
perfect alternative to HDMI Extender
Ultra solution 8K, 60Hz
AOC (Active Optical Cable) to 4-core optical fiber
Plug and Play
HDR RGB 4: 4: 4 (high Dynamic Range)
32.4Gbps bandwidth up to 100m
Supports 3D visual effects
Cable thickness: 5mm
70 meter
black
24K Gold plated
Non isolated

Splitter, fra 1 til 3 Mini DisplayPort enheder

HDMI Multi Viewer (HD in, 4K out)
Support 8 HDMI inputs, one HDMI output
Support 8 HDMI signal screen segmentation
Support 8 HDMI single picture signal seamless switching
Support IR control
The input resolution support up to 1080P,720P,1080i,1024x768,1360x768 etc.
The output resolution support up to 1080P@60HZz 3840x2160@30Hz
Support audio and video superposition
HDMI input and output transmission distance:high speed HDMI cable can reach 15Mm
Power Adapter : DC12V/1A
Net weight:approx. 792 g
Size: 252mm x 105mm x 25mm

KVM extender for VGA, USB K/M over Cat 5/5e/6 UTP
Up to 300 meters distance from a computer
1920 x 1440 @ 60Hz
2 users can share 1 computer, locally and remotely
Ideal for professional video applications
Only supports the standard USB HID keys
USB ONLY for keyboard and mouse (not touch)
No drivers needed or software required
Rotary knob adjustment of brightness and contrast (color)
Dimensions: 95 x 97 x 28mm
Supply voltage: 9~12VDC, PSU included

Skærmsplitter til 4 skærme med DVI-I tilslutning

KVM receiver to create several operating positions for one PC sends
KVM Extender up to 150 meters point to point Cat 6 cable
KVM Extender over TCP / IP.
A BOOST HDMI150-D LO transmitter supports up to 253 recipients
up to 1920 x 1080p @ 60Hz
Audio Format: DTS-HD / Dolby true HD / LPCM7.1 / DTS / DSD
USB KVM feature: Keyboard and mouse (HID signal) remote
USB 2.0 up to 480Mbps
Over router / switch with IGMP snooping
H.264 video.komprimering
Video standard: HDMI 1.3 and HDCP 1.2 standard
EDID emulation via PC's graphics card

REMAINDER SALE

HDMI Booster, point to point, point to multipoint
Cascade coupling from receiver to next receiver
Set with 1 x transmitter and 1 x receiver - VDSL communication
Up to 3800 meters
Full HD 1080p
HDMI 1.4
With IR return for HDMI player
DC 12V 2A power supply

AHD Analog cameras are not to composite video converter converts
AHD video signal into Composite, VGA, HDMI
With AHD looping
Input: BNC to AHD
output 1: BNC to AHD loop out
output 2: Composite with BNC to recorder / monitor
output 3 and 4: VGA and HDMI up to 1080p
up to 300 meters of coaxial cable
Supports cascade coupling
Supply voltage : 12VDC

2-port KVM switch
1 x DVI 1.0 inch (from each PC)
1 x USB BM 2.0 (from each PC)
3 x USB 2.0 for mouse and keyboard on the control side
Sound in and out
EDID support
Resolution up to 3840x2160 @ 30HZ (NOTE 30HZ!)
Change from button on the front
Cables must be purchased, available in several lengths
Can function as a DVI or USB switch, requires supplied power supply

Transmits uncompressed HD video and audio over CAT6a / 7 cable up to 100 meters
Can be powered monitors or receivers with hdbaset with PSE
PSE is the equipment that sends PoE out on RJ45 port
Power from mini-USB with no PSE connected
Map HDMI cable, eliminating the need for extra cables
Resolution up to UHD (3840 x 2160), Deep Color and HD Audio formats
4K @ 60Hz 4: 2 : 0
4K @ 30Hz 4: 4: 4
HDCP compliant and Blu-ray ready
Plug and Play no software installation
Compact size.
Easy to install
REQUIRE THE BEST QUALITY CABLE! No support if the cord is from Danbit

HDMI Video Receiver with PoE
Transmitter Module is purchased: HDMI-Multi-HD-T
Video Wall with a maximum of 64 units
H.264 Video Encoder / Decoder, IR transfer
Delay of approximately 1 second from transmitter to receiver
HDMI 1.4a
Connection over IP - Use switch with IGMP Snooping
Max. 64 Groups
Range Up to 100m - Point to Switch or to Transmitter
Cables Cat 6a. Good quality
Edid Emulation - possibly not on all screens, then buy it from Danbit
1 x RJ45, 1 x DB-9, 1 x HDMI exits
Supply IEEE 802.3AF / to POE + or 5V DC, 2a (not included)
Requires quality switch When used over IP
Dim: 130 x 82 x 30 mm

4K DP 1:3 splitter/extender
3840 x 2160@60Hz
Dual Mode DP++
Multi Stream HUB MST
Supports HDR and HDCP 1.4/2.2
Cable length 12cm
Dimensions: 105 x 43 x 14
Supply voltage 5VDC (USB cable included)

Composite Video Switch
8 Input BNC Hier to 1 Output BNC He
Supports lower power consumption at full load below 500 mA
AC / DC Adapter- 12 VDC, 300 mA
Video Distortion: 0 .5 DB
Remote control IR
for wall mounting
175 x 81 x 25 mm

4K 60HZ up to 60m (HDMI 2.0)
4K 30HZ up to 120m (HDMI 1.4)
HDMI2.0/HDCP2.2
Point-to-Point
CAT6 cable recommended (at least CAT5e required)
IR transmition
5VDC Transmiter and Receiver

Mix HDMI video from 2 sources of 1 screen
PIP image in image
PBP image in picture
Screen layout (lock) function
Multi-format 2 in 1 out-switch
2-channel HDMI Video Swappable
Scales Resolution Up or Down
Up to 4K UHD (3840 x 2160 @ 30Hz, 4: 4: 4)
Audio out as Analog and Toslink SPDIF
Supports more than 40 Presets
Complete Video Control of Brightness, Contrast, Saturation, Tint, etc
OSD / IR / Button / Serial Interface
HDCP Compatible, 3D Video and Blu-Ray
Plug-N Play - System, No Software Installation
Supply: 12VDC

DisplayPort (DP) Cable
perfect alternative to HDMI Extender
Ultra solution 8K, 60Hz
AOC (Active Optical Cable) to 4-core optical fiber
Plug and Play
HDR RGB 4: 4: 4 (high Dynamic Range)
32.4Gbps bandwidth up to 100m
Supports 3D visual effects
Cable thickness: 5mm
50 meter
black
24K Gold plated
Non isolated

Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
15 meters
non-galvanically isolated
Supply From HDMI Source

Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel) Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
10 meters
non-galvanically isolated
Supply From HDMI Source

Media plays from external memory
Remote control included
Full HD up to 1080p
HDMI output.
AV (analog video)
Compact design
Auto Play when Power ON
Video loop
SD/MMC card up to 32 GB
USB2.0 disk drive / stick
FAT/FAT32/NTFS
Dimensions: 8.0 cm x 6.0 cm x 1.5 cm
DC5.2V, 2A PSU included

4K HDMI Extender Over Patch Cable
HDMI 1.4 / HDCP 1.2
Up to 120 meters
4K @ 30 Hz
One-to-One or One-To-Many
Max 12 RX Can be connected one TX (Daisy Chain)
120m Cat 6 / 100m Cat 5e
remote control IR from RX to TX
Plug and Play
Power supply: 5V 1A to USB port (2 pcs supplied)
Dimensions: 100 x 85 x 25 mm
Operating temperature: -15 - + 55 ° C
Extra receivers can be purchased BOOST-HDMI120-4K30RX

4K HDMI Extender Over IP
HDMI 1.4 / HDCP 1.4
Up to 120 meters (point-to-points)
4K @ 30 Hz
2 x USB-A 2.0 (HID emulation)
One-to-One or One-To-Many
Max 32 RX Can be connected One TX (Via Ethernet Switch)
Remote-IR from TX to RX
Plug and Play
Power Supply: 5V 1A (2 included)
Dimensions: 107 x 105 x 27 mm
Operating temperature: -15 - + 55 ° C
Weight: TX 499G, RX 494G
acquisition: K-USB4AM-AM -Fe to connect the USB-A port to PC

From 1 Mini DisplayPort to 3 outputs with VGA, HDMI and DisplayPort
Same picture on the 3 different monitors
Input: up to 2560 x 1600 dots
Power supply retrieved from Mini DisplayPort connector
Cable from DP to Mini DP included

Overfør SDI-signalet op til 200 meter og op til 1200 meter med 5 i serie

VGA + audio Extender set via cat 6A UTP cable.
A transmitter with VGA in and VGA out to local screen
1 x RJ45 connector to point to point cable to receiver
Receiver (remote- Unit) with 2 x VGA output
No software or drivers
Gain (Equalization) Control selector for optimal image
2 sets can provide a total distance of 250m
resolution: 1280 x 1024 with cat 6A cable of high quality.
Ideal for exhibitions, shops, courtroom, bus station, etc.
Support sound AUX
Do not connect to network switch

KVM extender over single-mode fiber
simplex fiber (1 fiber) with SC connector
set with transmitter (TX) and receiver (RX)
HDMI-A 1.3, HDCP 1.2
1920 x 1080 @ 60Hz
HDMI Exit to local screen on transmitter
2 x USB-A 2.0 female on receiver for keyboard, mouse
USB 2.0, can accept USB hub to HID devices
Power Supply: 5VDC / 1A (supplied for transmitter and receiver)
Dimensions: 113 x 80 x 28mm
Operating temperature: -5 - + 70 ℃

Analog video to HDMI converter with video scaler
Composite (CVBS) in
Component (YPbPr) in
VGA in 
2 x HDMI in 
2 x USB 2.0 for memory stick with media playing files
1 x HDMI out
Resolution of HDMI output: 480i, 720p, 1080p, 4K2K @ 30Hz.
Remote control setup (incl. but excl. CR2032 battery).
Supply voltage: 5VDC / 1A (PSU included)
Can be powered via the USB port (optional cable).
Dimensions: 172 x 130 x 43 mm (W x D x H)

The same picture on 16 VGA monitors
1 x VGA male - input
16 x VGA female - output
Resolution up to 1920 x 1440 points
Active splitter means that the distance to the VGA monitor up to 65 meters
Use good quality VGA cables - K-DB15HDM-Mxx from DANBIT

8 Port VGA Switch

The same picture on 8 VGA monitors
Copies monitor's EDID information to port 1
1 x VGA male - input to 8 x VGA female - output
Resolution up to 1920 x 1440 points
active splitter means that the distance to the VGA monitor up to 65 meters
Use good quality VGA cables - K-DB15HDM-Mxx from Danbit

With the included software for PC can be DVI-D shared via LAN
DVI-ETH + connect a DVI-D screen where desired and retrieves DVI signal over the network
Multiple DVI-ETH + can be connected to the same network
DVI-ETH + can also act as external graphics card via the PC USB port

VGA and Audio Matrix, 2 in 4 out
2 x VGA inputs to 4 x VGA outputs
All inputs can be routed out of outputs
Possibility of scanning
Remote control included
Can be operated from the front
Resolution up to 1920 x 1440 points
AC adapter included

USB 3.0 til displayport (DP) Adapter - USB3.0 han til DP hun.

USB 3.0 to DisplayPort Graphics Dongle with 4K Ultra-HD Resolution Support. 

1 x Transmitter, 1 x Receiver
Driverless
Up to 8 transmitters for each receiver
Up to 50 meters Point to Point, Wi-Fi up to 10 Meters.
Plug and Play
5Ghz 802.11
1920 x 1080p
Audio
OS Support: Windows, Mac OS, Linus, Android, IOS, NS, PS4/5, Xbox
Protocol: Miracast, DLNA, Airplay

USB3 til DisplayPort Graphis adapter.

USB 3.0 to DisplayPort Graphics Dongle with 4K Ultra-HD Resolution Support 

HDMI BOOSTER HD 1080p
HDMI signal over single CAT 5e/6 cable
Resolution 1920 x 1080 @60Hz
POC: Power Over Cable. Transmitter powers Receiver
HDMI 1.3/HDCP 1.2
Supply voltage: 5VDC