Subcategories
Active filters

Restlager: Trådløs PC nøgle
Radiostyret PC-sikkerhedslås til USB-porten
Beskytter PC’en mod at andre kan bruge den.
Radiomodtager til USB-porten og lille sender til lommen.

GSM Doorphone for 6 apartments with shared front door. Calls can be answered anywhere and the owner opens even from the mobile
Beautiful stainless steel door phone with 6 buttons / users
Sale - special price

LPR camera for number plate recognition, IP67 close, H.265, IK10, vandal proof
Reading of license plates with the speed of 0-200 km / h
can register license plates for up to four lanes to 5-Megapixel resolution at 30 fps
Built-in infrared white LED (approximately 60 meters)
RJ45 gigabit port
Sound alarm
ONVIF support
Motion detection
WDR
Micro SD
PoE
12VDC / 24VAC
Extended operating temperature -40 - 60 °

Dual-Lens 4MP People Counting Camera with POE and Digital I/O
Bi-directional people counting
Accuracy Up to 95%
Target height filtering
Recommended installation height is 2 to 6 meters
Alarm trigger for crowd density counting or reverse entry detection
Real-time, daily, weekly, monthly or annual counting reports and graphs
1x Input, dry contact, NO/ NC / 1x Replay Output (30V DC, 1A)
PoE (IEEE 802.3af)
Micro SD card slot (SD/SDHC/SDXC/UHS‐I, Class 10) for local storage
Audio jack for microphone and speaker
IP66
12 languages on Web interface
ONVIF (Profile G, S, T) conformant

4G SMS alarm with 8 x Digital input, 6 x Analog input, 4 x Relay outputs. Alarms to mobile phone via SMS or call, APP
8 x digital inputs Dry contact/wet contact (Close: 10~30V; Open: 0~3V)
6 x analog inputs. 12 bit resolution
0-5V, 4-20mA or 0-20mA
4 x relay outputs 5A/30VDC, 5A/250VAC
Up to 10 alarm receivers
1 x USB port for setup
GSM 3G 4G mobile network
9-36VDC (12V/300mA)
Backup battery 3.7V 1200mAh
Operating temperature -10- + 70 °C
Setup via USB cable
Customized SMS alert messages
APP for iOS and Android
Supplied WITHOUT SIM CARD
Power supply included
Magnetic antenna included

Outdoor Access System with Bluetooth and RFID
Outdoor Access System
Supports: Smartphone, RFID, PIN (4-8 digits)
1 Administrator and up to 200 Users
Smartphone App: Android 5 and Up, IOS 9.0 and up
Dimensions: 152 (L) x 45 (W) x 23 (D) mm
Temperature: -20ºC - +50ºC
Power: 12VDC/24VDC

Outdoor vandal-proof 5MP IP domecam with video analyse, PoE, IP66
Tampering Alarm, Object Counting, Intrusion Detection, Alarm Detection
Advanced Motion Detection (5 areas)
5MP/3MP@ 30 fps, 2MP@60fps
Resolution: 2592 x 1944
IR distance 35m
IP66 Weatherproof
-20°C to 55°C
PoE 8.3W max.
Micro SDHC support up to 64GB
ONVIF

110dB outdoor siren with light
Accessories for burglar alarm ALARM-GSM-WKEY
Loud outdoor siren
Volume 110dB
Battery DC15V 200mA

Electronic door magnet for 12VDC for embedding in frame. Up to 136kg holding power
Electronic door magnet for sliding door etc.
Holding power up to 136 kg
Aluminum housing and vandal-proof
Supply voltage for team: 12VDC
No holding power when de-energized
Operating temperature: -10 - 55°C
Humidity: 0-95% non-condensing
Magnet: 200 x 32 x 24 mm
Door plate: 152 x 32 x 10 mm
Weight: approx. 1.5 kg
Bond sensor NO/COM
Additional access system - see Accessories

Cabinet lock with touch, One-time password function
AA1.5Vx4pcs (not included)
Emergency power via USB
Temporary password
Touch key pad
Public mode or private mode
Fits: wooden and steel cabinets

Outdoor keyboard with RFID/chip reader. Stand-alone access control. 12 - 24VDC
Stand-alone access control in IP68 sealed housing
ADGANG20-RFID is a stand-alone access control that can control an electronic door lock.
Identification: Via keyboard or RFID EM card/chip.
User capacity: Max. 2000 users.
Identification time: < 20 ms.
RFID Reader: EM type for 125 kHz.
Checking the door lock:
Relay output with make and break function 12VDC or 24VDC / 6Watt
Housing: IP68 sealed stainless metal housing
Technically demanding product - Support hours can be purchased additionally

Electronic door lock for 12 or 24 volts, with no voltage Open
Electric door lock that is open without voltage.
Holding force 1000 KG
supply: 12 / 24V DC 130 / 65mA when activated
Suitable for Scandinavian types
Operating temperature: -20 ° C to + 40 ° C
Multi voltage 12-24V AC / DC
approved for use in fire-resistant doors E120 / A120 / EI120
Fail secure (PTO): SL 620
Fail safe (PTL): SL 621
Latch bolt adjustable left / right
Built in "By status" sensor
Status monitoring: latch, anti-thrust bolt live handle
Mechanical key override

Electric door lock for 12 or 24 volts
Electric door lock that is locked without tension.
Holding force 1000 KG
supply: 12 / 24V DC 130 / 65mA when activated
Suitable for Scandinavian types
Operating temperature: -20 ° C to + 40 ° C
Multi voltage 12-24V AC / DC
approved for use in fire-resistant doors E120 / A120 / EI120
Fail secure (PTO): SL 510
Fail safe (PTL): SL 511
Latch bolt adjustable left / right
Built in "By status" sensor
Status monitoring: latch, anti-thrust bolt & amp; live handle
Mechanical key override

Stand-alone access control in IP68 close cabinet
stand-alone adgangskontroller Mifare

Info kommer snarest
Tilbehør: Strømforsyning til IRISID-7111-U1

Timesheet Software. Add-on module for ACCESS RFID KEY and ACCESS RFID WIFI
Timestamp TNA software module for ACCESS RFID KEY and ACCESS RFID WIFI

Trådløs indendørs sirene
Tilbehør til tyverialarm ALARM-GSM-BASE
Forbindes trådløst til alarmsystem
Trådløs sirene med nem stik kontakt montering

Electronic lock, for mounting on cabinets and doors, closing control, holding force of 50kg, 12VDC
Compact motor-controlled lock with separate pawl
Control voltage - 12VDC
With door-closed status
Holding force: 50 kg
Operating temp. -10 ° C - + 55 ° C
Dimensions: 41 x 35 x 19mm
Pal: ø9mm, 18mm
Weight: 0.11kg
Can be used on wood, aluminum and metal

Mini RFID Mifare reader 13.56MHz with memory. Stand-alone access control with relay output. 12vdc.
Compact Access Control for Mifare RFID
40mm in diameter, 30.2mm long
Thread is 28 mm
Can hold up to 1000 Mifare TAGs/cards
Relay output COM, NO, NC (changeover switch)
Adjustable hold timer - (potmeter) 0.5 - 100 sec.
Users are created with "master card"
Users are removed with "master card"
No software, no PC or terminal
3 different LED colors
Makes sound when programming
IP54 sealed front
Supply voltage: 12VDC / 70mA
No physical interface

Outdoor RFID reader with PoE, IP65, IP67 with 1 x relay. 125khz em, 13.56MHz Mifare
Outdoor RFID reader 125kHz EM 13.56 Hz
MIFARE, MIFARE Plus, DESFire / EV1 Felica
IP65, IP67
Vandal safe IK08
Supporter up to 200,000 users
1 GHz CPU to 4 GB flash + 64MB RAM
Multi buzzer
Driftstempereatur: -35 - 65 C
Weight: 144g
Dimensions: 48 x 145 x 27 mm | RS-485 Master or slave
10/100 Mbps ethernet
1 x Relay
PoE
Supply voltage: 12V DC

Waterproof protection case for outdoor access control, RFID, finger scans, face recognition
Waterproof and sunscreens
black | Material: ABS plastic
Dimensions: 15cm x 10.4cm x 9cm
Simple to install and good quality

Access System with Bluetooth for electronic door lock with a request button. Auto open short distance to the door. 1,000 users.
Access is controlled by Smartphones via BT
Equipped with call button to request access
United pushbutton with light
Built in sounder
Up to 1000 users
Different user rights
3 functions: access with BT APP, access via query Exit
one administrator
BT: BLE4.2 (Low Energy)
BT range: up to 50 meters, depending on conditions
Compatibility: Android 5.0 and up, iOS9.0 and up
relay contact: NO / COM / NC (switching relay)
Supply voltage: 12 to 24VDC 1A
Operating temperature: -20 - + 70 ° C
Dimensions: 86 x 86 x 38 mm | material: plastic housing

Dørautomatik to the revolving door of connection for NON-TOUCH automatic door opening. Accessories indadgående- and outward
Door machine with switch-box for swing-door
Supplied switch box for function selection
With connection for access control
With connection for NON-TOUCH access switches
Connection for emergency battery
Approved according to EN 61000 standards for safety
Supply voltage: 100 - 240VAC
Built-in motor: 60VDC, 2Amp
Power consumption: approx. 77 Watt
Connection for 24VDC backup battery
Dimensions: 125 x 79 x 34 mm
Door opening angle 80 - 120 °
Door width: 750 - 1200 mm
Door height: 2800 mm
Door weight: 50 - 150 kg
230VAC

IR safety probe-to-door automatics. Prevents the door closing when crossing. 0 to 2.5 m viewing distance. IP54. Relay output
IR safety sensor for automatic doors prevent property damage and personal injury
Mounted above the frame or on the door
Relay output connected dørautomatikstyringen
Length: 360 mm | IR beam adjustment: 5-25 °
6 measuring points
detector distance: 0 to 2.5 meters
Max. installation height: 2.6 meters
Relay Output is continuously active when the thing or person is detected
Dimensions: 360 x 45 x 45 mm
Weight: 350g
Supply voltage: 12 - 24VDC or 12 - 24VAC
IP54
EU standard: EN16005

Access control door opening via mobile phone Bluetooth, RFID reader and PIN. With the event logs
Bluetooth BLE 4.2 (Low Energy)
Up to 200 user
With user rights
Up to 1000 event logs in memory
access with RFID tag (EM, 125kHz)
access by PIN code (4-8 digits)
with keypad backlighting
app for the iPhone and Android
Range up to 50 meters
Can be set to open at pressures in the APP or automatically once inside the selected range
With solid state relay - no wear
With vandal alarm
Supply voltage: 12 to 24VDC
Dimensions: 152 x 45 x 23 mm

Electric lock box for single and double-acting swing door 272 kg. 24mm housing, 25mm face plate. 28mm post tin, steel, 12/24VDC
Electric lock box for single / double acting swing doors
Smal frames - 25 mm Front plate
Brushed stainless steel
272 kg Pressure strength
Latch Status Output: 1A / 125VAC
Supply voltage: 12VDC 280MA / 24VDC 180MA
Operating voltage: 12 - 24VAC / DC
Operating cycle: 250,000 (factory tested)
Size: 24 x 160 mm House, 25 x 210 mm Front plate
Pole plate: 28 x 210 x 2 mm

Exit contact in heavy plastic house with No, NC contact. Steel plate for mounting on surface. Wide button. Contact up to 3 amp
Output contact for access control with cunduct / breaking function
robust plastic house with steel Back plate
Contact: NO / NC / COM
Momentary Contact press
Contact: Max 3A
Size: 86 x 86 x 42 mm
Passive Exit Button

Push button with Green LED 12VDC
For 19mm mounting hole
12VDC
IP65
NO/COM/NC
Momentary reset
Metal

Access control with QR code and RFID reader
13.56MHz Mifare RFID and QR code
Free SDK available
Power supply: DC 12V
Operating temperature: -20℃ ~ 70℃
Possible in 8 digits ID for time attendance recording.
High capacity with 8 digits card number.
Programmable Password 4 digits PIN for each person.
16*2 rows of LCD display with 8 digits for displaying year, month, day, week, time events counter.

Electronic lock for cabinets and doors. Locked without excitement. Trigger voltage 12vdc, 180mA. Holding power of 150kg.
Cabinet lock - 150kg. Locked without voltage
trigger voltage: 12VDC / 180MA
Holding force: 150kg
Size: 50 x 31 x 27 mm
Weight: 0.18kg

Electronic lock for cabinets and doors. Holding power of 150kg. Locked with excitement. Hold voltage 12VDC, 180mA
Cabinet lock - 150kg. Locked with voltage
Voltage: 12VDC / 180MA
Holding force: 150kg
Size: 50 x 31 x 27 mm
Weight: 0.18kg

Electronic door magnet for 12 / 24VDC 420 / 210MA, anodized alu. With Bond-Alarm relay. Hours. Holding power up to 350 kg
Lock force Up to 350 kg
Dim: 260 x 58 x 30 mm
Face plate: 190 x 45 x 13 mm
Voltage: 12VDC / 24VDC
Power consumption: 12V / 500mA / 24V / 250MA
Signal Output NO / NC / COM Lock Status Relay Output
Timer (Delay): 3 / 6 / 9 seconds
Good for wooden door, glass door, metal door, fireproof door
Surface temp: +20℃
Operating temperature -20 - +55℃
humidity 0 ~ 95% (non-condensing)
Surfaces: House Anodized Aluminum
Surfaces Magnet: Zinc
Surfaces Face Plate: Zinc
Weight: 2.7 kg

Electronic door magnet for 12 / 24VDC 420 / 210MA, anodized alu. With Bond-Alarm relay. Buzzer. Holding power up to 500 kg
Holding power Up to 500 kg
Dim: 282 x 74.8 x 38.8 mm
Face plate: 185 x 60 x 13.2 mm
Voltage: 12VDC / 24VDC
Power consumption: 12V / 420MA / 24V / 210mA
Signal output NO / NC / COM Lock Status Relay output
LED Red Indicates that the door is unlocked, green indicates that the door is locked
Buzzer - Summer 5/10/20/30 SEK
Suitable For wooden door, glass door, metal door, fireproof door
Surface temp: + 20 ℃
Operating temperature -20 - + 55 ℃
Humidity 0 ~ 95% (non-condensing) Surfaces: House anodized aluminum
Surfaces Magnet: Zinc
Surface plate: zinc
Weight 4.5 kg

Z-bracket for door magnet DOOR-MAGNET+ if it is to be mounted on inward door
Accessories for DOOR-MAGNET+
z-angle fittings for inward door (Inswing)
The kit consists of 3 parts
heavy aluminum profiles
target: See drawing

Double electronic door magnet for 12 / 24VDC with switching. Indoor double doors. Holding force up to 2 x 545 kg
Electronic door magnet for double-doors, whop door etc.
Holding power up to 545 kg for each door
Aluminum House and Vandalsproof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6 watts
Automatic switching between 12 and 24VDC
No holding power at voltageless
Operating temperature: -10 - 55 ° C
humidity: 0-95% non-condensing
double magnet: 533 x 71 x 40 mm
Door plates: 185 x 61 x 16 mm
Double mounting plate: 533 x 40 x 8 mm
Weight: approx. 5.6 kg
Buy access system - see accessories

Powerful electronic door magnet, 12 / 24VDC switching. With LED. Aluminum, IP65. Holding force up to 540kg
Door magnet with holding force up to 545 kg
Aluminum House and vandal safe
Supply voltage for holding: 12VDC or 24VDC, 6 Watt
automatic switching between 12 and 24VDC
No holding power at voltageless
Operating temperature: - 10 to + 55 ° C
Magnet: 254 x 67 x 40 mm
Door plate: 185 x 61 x 16 mm
Mounting plate for frame: 254 x 40 x 6 mm
Anti magnetic function
Weight: 4.9 kg

18500 3.7V 2040mAh Lithium-Ion battery. 3.8A. +10 ~ + 45 ° C
18500 Lithium-Ion battery
Rated voltage: 3.7V
Capacity: 2040mAh
Max. load: 3.8A
Operating temperature: +10 ~ + 45 ° C
Charging method: CC-CV
Dimensions: 18.5 x 49.5 mm
Weight: 36.5g
Without protection circuit

24VDC Coil Low Level Trigger 2 Channel Power Relay Module Board
number of channels 2
Coil Voltage 24Vdc
Load 10A, AC 250/125V, DC30V/28V
4.3 x 4.3 x 2cm/1.7" x 1.7" x 0.78"(L*W*H)

GSM Controller with 2 x current relay, 2 x Power MOS output, 2 x AI, 4 x DI, 8 x Temp. Bat backup. 230 VAC
2 x 230VAC power relay /16A – resistive load.
2 x DC switched outputs up to 40VDC/6A, also as PWM for LED, FAN, etc.
2 x independent inputs: 230VAC and up to 24VAC/24VDC, SMS alerts for power failure
SIM card and SD card
Backup battery (not included) as an option – Li-Ion 3.7V (14500)
Switch appliances on and off with SMS messages
GPRS M2M function, TCP/IP Get to directly send input status to Server
Get XML status from server to set device outputs.
Scheduled automatic switching on and off of appliances
Sends power failure warning and recovery.
Restarting appliances, such as servers.
Monitoring of 2 x A/D inputs AC/DC voltages with autodetect
4 x digital inputs DIN1, DIN2, DIN3, DIN4 for DC voltage.
Universal bus (1-wire) for temperature and humidity sensors.
Thermostat function.
Alarm function: Temperature alarm, Humidity alarm, A/D limits, DI change
Alarm in case of jamming of a GSM signal.
Up to 12 alarm numbers, each can be set for different events
Up to 1000 authorized users and 2 administrator numbers.
Bluetooth
All inputs are SO compatible

Access control control of electric door lock via Bluetooth APP, Has RFID reader. 200 users. Event log. IP65.
Bluetooth BLE 4.2 (low energy)
Up to 200 users
With user rights
Up to 1000 event logs in memory
Export to Excel spreadsheet
Access with RFID chip (EM, 125kHz)
With LED indicator
APP for iPhone and Android
APP is Easiprox
Range up to 50 meters
Can be set to open by pressing in the APP or automatically when you are within range
With solid state relay - no wear and tear
Adjustable re-lock time 1 - 1800 seconds
3 lock mode: Re-lock, always open, always locked.
Vandal alarm
Supply voltage: 12 to 24VDC
Dimensions: 88 x 44 x 23 mm

AI Face recognition terminal. Smart facial recognition, ID and temperature alarm access system. IP65 display
8" smart access control system, face and ID QR, RFID
Measures body temperature
Interface: LAN, Wiegand, USB2.0
Relay output for electric lock on door/gate
Offline dynamic portrait mode
Face database: 50,000+
Recognition distance: 0.5 - 3 meters
Dual-eye recognition mode
Speed: better than 0.3 second
99.9% accuracy
Thermal IR meter: 32 - 45°C with alarm
Supply voltage: 12VDC /2.5A
Dimensions: 248 x 138 x 30 mm
Weight: 1.5 kg
IP65 sealed
Free management software (English)

Nayax CCI Protocol Cable For Coffemachines
Designed for Nayax payment terminals and CCI coffee machines
RS232 Male DB9 connector for interface with coffee machines.
Power(DC), ethernet(RJ45) and external reader(RJ11) ports.
Eliminates the need for CCI to MDB converters

Wireless access control with relay output with selectable time. Can be controlled from 15 remote controls. 12-24VDC
Access control with learning function
Supported from a maximum of 15 wireless remote controls
Frequency band: 433MHz
Range: up to 50 meters (LOS)
Relay output for electric door lock (24V/3A)
Entry to Exit button
Selectable timers: 1, 3, 5, 10 seconds
Wall mountable with flanges
Dimensions: 83 x 62 x 30 mm
Plastic housing

Remote control (Keyfob) for ADGANG15-RF4 access control, range up to 50 meters
Remote control for ADGANG15-RF4
Battery: 12VDC (23A)
Battery operation for approx. 13,000 keystrokes
IP65 sealed
Keychain
1 button for door opening
Dimensions: 55 x 30 x 13 mm

IP65 sealed wireless EXIT button for ADGANG15-RF4 controller.
Robust EXIT button for ADGANG15-RF4
Can be used as remote-controlled OUT-PRESSURE
Suitable for industrial environment
The purpose of the EXIT button can be many
Frequency: 433 MHz
Range: up to 50 meters from controls (LOS)
Battery operation: 12VDC (23A)
Operating time: up to 13,000 button presses
Dimensions: 90 x 85 x 58 mm

Wireless EXIT button for ADGANG15-RF4 controller
EXIT button for ADGANG15-RF4
Can be used as remote-controlled OUT-PRESSURE
The purpose of the RXIT button can be many
Frequency band: 433 MHz
Range: up to 50 meters from controls (LOS)
Battery operation: 12VDC (23A)
Operating time: up to 13,000 button presses
Dimensions: 115 x 40 x 32 mm

Nayax VPOS TOUCH and ONYX cable for marshall RS232 communication
Cable designed for the proprietary Marshall protocol from Nayax payment terminals.
It is equipped with an RS232 plug + one additional plug for debugging and power supply plug.
Length 110 cm.

Nayax VPOS Touch/Onyx - Pulse cable
Connect your VPOS Touch or ONYX to a machine using Pulse.
Can be used with coin mechanisms and direct relay outputs(relay is not included).
Perfect solution for car wash systems, paid toilets, and washing machines.

Payment system with 2 units for contactless card, chip, magnetic stripe and MobilePay
Payment system for vending machines, doors etc.
Accepts contactless & nbsp; chip, magnetic stripe and MobilePay
GSM (SMA) and LAN (RJ-45)
2 x digital outputs. & nbsp;
1 x deaktiveringsindgang. Can be configured to deactivate the machine
Can be connected to a vending machine, washing machine, door, etc.
Web-based control panel, can be operated over the Internet
Support for setup can be purchased
Comes with SIM card
User agreement with service provider is required

Pay terminal with touch display for contactless cards and mobilepay, pulse or MDB interface
BEMÆRK: Kontrakt med DANBIT A/S og Brugeraftale med serviceleverandør SKAL etableres før køb!
Betalingssystem med touch display.
All-in-one med POS og Data-kommunikation i samme hus
Accepterer kontaktløse kort og MobilePay.
GSM antennestik MMCX stik
6 digitale OC. pulsudgange til automat/vendingmaskine, maskiner, døre etc.
6 digitale indgange, inhibit, for at stoppe køb ved mangel/fejl
Konfigureres via platform med priser og funktioner
Kan tilkobles en salgsautomat, vaskemaskine, dør, osv
Web-baseret eller MQTT Cloud
Kommunikation: LAN eller 4G
Support til opsætning kan tilkøbes.
Leveres med SIM kort klar til funktioneopsætning
Forsyningsspænding: 10-24VDC, 10-42VAC / 2A (PSU medfølger ikke)

Info kiosk with built-in sanitizer, android, receptionist calls, advertising, max. number of in-store
21.5 "Infostander 1080x1920
Touch Screen
Spritdispenser 4 liters
Low Level Sprit
Adjustable amount of Sprit
Android Based
Wall bracket or foot can be purchased (not included)
Can be used with the Danbit program "Hi Customer"
and for monitoring the number of visitors in store
Call for prices!

Door switch for access control / access system, closing switch 36VDC 3A. With LED indicator
Door switch for access control - EXIT button.
End contact by pressure
Contact: NO/NC/COM
Max. 36VDC 3Amp
Cast aluminum body, steel button
12VDC LED supply
Operating temperature: -20 - +50°C
Dimensions: 80 x 30 x 24 mm

Payment terminal with touch display for contactless cards, chip, magnetic stripe and mobilepay
NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase!
Payment system with touch display.
accept contactless, chip, magnetic stripe and mobilepay.
GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine
can be connected to a vending machine, washing machine, door, etc.
Web-based control panel.
Communications Internet or WiFi or 4G
Support for setup can be purchased.
Supplied with SIM card (4G)
Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)

1 x pneumatisk pullert 90cm uden styring og installation
Pneumatisk pullert uden styring til vejspærring/ tyverisikring.
Til udendørs brug
Rustfrit stål
90 cm høj, diameter: 16,8cm
103 Kg
LED indikering
Tyverisikret
OBS: kræver styring

Trådløs PIR sensor til loft montering
Tilbehør til tyverialarm ALARM-GSM-BASE
Indstrålingsbeskyttet
Detektionsafstand 6-8 meter
360 graders vinkel måling
installationshøjde 3-5 meters
Forsynes med 3.6V lithium batteri

PIR alarm med infrarød og bevægelses sensor
Tilbehør til ALARM-GSM-BASE
Tilbehør til ALARM-GSM-REPEATER
Dobbelt sensor med infrarød og bevægelse
Undgår falske alarmer
opdagelses distance 8 til 12 meter

Mini door magnet for 12 or 24VDC, 6 watts, automatic switching, indoors and for outward door. Holding force up to 140kg
door magnet with clamping force up to 140kg
Stainless steel and vandal proof
supply voltage of teams: 12 or 24VDC, 6Watt
Automatic switching between 12 and 24VDC
Active with applied voltage
no holding power by energized
Operating temperature: -10 - 55°C
Magnetic: 200 x 36 x 23 mm
Door-plate: 152 x 32 x 10 mm
Mounting plate for the frame included
weight: 1.2kg

Electronic door magnet with clamping force up to 364KG, 12 / 24V DC,
Electronic door magnet 12 / 24V DC
363 KG holding force
Operating temperature: -10-55 degrees
Fungtighed: 0-96% non-condensing Blue Magnetic: (L) 265 (W) 29, (D) 49mm
A valve plate (L) 185 (W) 45, (D) 14mm
mounting plate (L) 265 (W) 29, (D) 6.5mm
Weight: 2.79 KG

Waterproof Mini Magnetic door Lock, 272 Kg. Holding Force, 12 / 24VDC automatic - High Security.
Designed for face mount on in-swing doors or gates
Operating Temperature: -10 - 55ºC
Armature Plate: 185, 45, 14 mm.
Magnet: 203, 43, 40 mm.
Spike and surge protection.
Holding force up to 272 Kg.
Dual voltage 12 or 24 VDC.
Anti-residual magnetism.
High reliability.
Weight: 3.0 Kg.

Angle bracket for door magnet DOOR-MAGNET-LOCK6 if it is to be mounted on an outward-facing door
Accessories for DOOR-MAGNET-LOCK6
Angle bracket for outswing door
The set consists of 1 part
Strong aluminum profile
Dimensions: See drawing

Powerful electronic door magnet (Waterproof), 12VDC. Stainless steel housing. Holding power up to 816 kg
Door magnet with holding power up to 816 kg
Stainless steel cabinet fully sealed with epoxy
Supply voltage for team: 12VDC 12Watt
No holding power when de-energized
Operating temperature: -10 to +55°C
Magnet: 284 x 72 x 48 mm
Amatur plate: 250 x 61 x 16 mm
Anti magnetic function
Weight: approx. 6 kg

Mini door magnet for 12 or 24VDC, 4 Watt, automatic switching, IP65 and for outward-facing door. Holding power up to 45kg
Door magnet with holding power up to 45 kg
Aluminum + steel and vandal-proof
Supply voltage for team: 12 or 24VDC, 4 Watt
Automatic switching between 12 and 24VDC
The door is locked with applied voltage
No holding power without tension
Operating temperature: -10 - 55°C
Magnet: 70 x 31 x 20 mm
Amatur plate: 60 x 32 x 8 mm
Weight: 300g
Purchase additional access control - see Accessories

Electronic magnetic lock with 110 kg holding force. 12 or 24vdc. Compact design
Electric magnet locksplation for gates and doors
Team power is 110kg
supply voltage 12 or 24vdc, minimum 5watt
consists of electronic magnet and heavy metal plate for door / frame
target: 160 x 28 x 17mm
Plate: 130 x 28 x 8mm
Buying access system - see accessories

Z-angle bracket for Door magnet+E. To inward door. Extreguated aluminimum
Angle bracket consists of 3 angles
mounting the holding magnet for inward door.

Z angle bracket for DOOR-MAGNET-DUAL6. For inward-facing door. Extruded aluminium
Vinkelbeslag kit med 3 dele
Til indadgående dør

Angle bracket for DOOR-MAGNET-DUAL8. To outward door. Extruded aluminum
angle bracket for frame
for outward door

Z-angle bracket for DOOR-MAGNET-DUAL8. To inward door. Extruded aluminum
angle bracket kit, 3 parts
bracket for inward door

Powerful electronic door magnet, 540 kg holding force, 12 / 24VDC auto-detect. Aluminum, IP65
door magnet with clamping force up to 545kg
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, 0.5A / 0,25A
No holding power at any voltage
Operating temperature: -10 to + 55°C
Magnetic: 267 x 68 x 40 mm
Door-plate: 185 x 61 x 16 mm
Mounting plate for the frame: 267 x 40 x 8 mm
Anti-magnetic feature
Weight : 4,9kg

Access control for controlling the electronic door lock via the mobile phone Android APP, Bluetooth
Bluetooth
Up to 196 users
APP for Android - e-access E1196
Range up to 50 meters
Can be set to open by pressing in the APP
Can be set to open automatically when you are within range
Built-in buzzer 85dBA can be activated when the door is open.
When you choose to activate Bi-stable function, you can press down the E button on the screen for a few seconds to activate and keep the door unlocked indefinitely.
Does not save events (no log function)

Electronic lock, for mounting on cupboards and doors, holding force approx. 100kg, 12-28VDC
Compact motorized lock with separate pawl
Locked without tension
Releases the locking pawl in case of short-term tension
The pal part has a push-out (5-8mm)
Adjustable delay on relocking 2 to 5 seconds
2 lock inputs
Can be mounted in 2 different ways
Control voltage - 12 - 28VDC / VAC, max. 165mA
Dimensions: 60 x 60 x 22mm

Wireless 433MHz Extender for wired alarm sensors Connected Alarm GSM Base
Tilbehør til ALARM-GSM-BASE
Tilbehør til ALARM-GSM-PIR-UD
Kan blive trådløst tilsluttet til en alarmbase
Til tilslutning af kablede alarmsensorer
Til udendørs brug + stænktæt
Forsyningsspæning: 13.8V 200mA

GSM Alarm controller with alarm via SMS. 6 x analog input v / 0-20mA, 8 x digital input 4 x relay output, APP, 4G
8 x digital inputs NC / NO Type
6 x analog inputs. 12 Bit resolution, 0-5V, 4-20mA or 0 - 20mA
4 x Relay outputs 5A / 30VDC, 5A / 250VAC
1 x USB port
GSM 3G 4G
9-36VDC (12V / 300mA)
Backup Battery 3.7v 1200mAh
Operating temperature -10- + 70 °C
Adapted SMS Alarm Messages
APP for iOS and Android

Access Recognition Access Control, RFID and Fingerprint Reader, Touch Display. Auto height adjustment. Patented anti-fake
Face creation with RFID and fingerprint reader
Advanced fake finger detection
Touch Keypad and Voice Over IP Doorphone
Max Users: 250,000 (Finger) / 10,000 (face)
Up to 10 million logs And up to 20,000 photos
Resolution: 500 dpi
RFID: 125kHz Em, 13.56MHz Mifare, HID prox
supplied via POE or 12VDC
Dimensions: 149.5 x 207.8 x 45.5 mm
Operating temperature: -20 - + 60 ℃
Technical demanding product - Support hours can be purchased

GSM Alarm with 2xDin, 2xain and 2XDO. Alarms for mobile phone via SMS or Call, APP, 4G
2 x digital inputs NC / NO type
2 x analog inputs. 12 Bit resolution, 0-5V, 4-20mA or 0 - 20mA
2 x Relay outputs 5A / 30VDC, 5A / 250VAC
1 x USB port
GSM 3G 4G
9-36VDC (12V / 300mA)
Backup Battery 3.7V 1200mAh
Operating temperature -10- + 70 ° C
Custom SMS Alarm Messages
APP for iOS and Android