5VDC 500mA (2.5W) converter from AC or DC 12 - 30 volts
AC / DC input voltage & nbsp; to 5VDC converter
5VDC 500mA output
Input 12 - 30VAC / VDC screw terminal
Output 5VDC power jack 5.5 / 2.1mm
Subcategories
AC / DC input voltage & nbsp; to 5VDC converter
5VDC 500mA output
Input 12 - 30VAC / VDC screw terminal
Output 5VDC power jack 5.5 / 2.1mm
Stand-alone access control in IP68 sealed housing
ADGANG20-RFID is a stand-alone access control that can control an electronic door lock.
Identification: Via keyboard or RFID EM card/chip.
User capacity: Max. 2000 users.
Identification time: < 20 ms.
RFID Reader: EM type for 125 kHz.
Checking the door lock:
Relay output with make and break function 12VDC or 24VDC / 6Watt
Housing: IP68 sealed stainless metal housing
Technically demanding product - Support hours can be purchased additionally
4 channels, 14 bit PCI Express x1
4 kanaler, 16 bit A/D dataopsamler, PCI Express X1
4 differential indgange - op til +/-10VDC
Sample rate er 500kHz per kanal
68 polet VHDCI hunstik
Terminalkort tilkøbes - TERM68 + kabel
6 AC inputs and f4 relay outputs. AC 110-240V
Supporterer 3.3 V eller 5 V PCI bus
12-bit A/D og sampling rate op til 110kS/s
16-CH single-ended or 8-CH differential inputs
On-board A/D FIFO
Bipolar eller unipolar analog input område
16-CH TTL DI og 16-CH TTL DO
2-CH 12-bit multiplying analog outputs
6 pc. DC / input, 4 relay output, DC 12-24V
Supporterer 32-bit 5 V PCI bus
12-bit A/D resolution (PCI-9111DG)
16-CH single-ended analog inputs
Op til 100 kS/s sampling rate
On-board 1 k-sample A/D FIFO
Programmerbar forstærkning på x1, x2, x4, x8, x16
Bipolar analog input-område
Supporterer 32-bit 5 V PCI bus
16-bit A/D resolution (PCI-9111DG)
16-CH single-ended analog inputs
Op til 100 kS/s sampling rate
On-board 1 k-sample A/D FIFO
Programmerbar forstærkning på x1, x2, x4, x8, x16
Bipolar analog input-område
6 pcs. DC / analog inputs, 4 transistor outputs, DC 12-24V
DC 12-24V, 6 pcs. DC / inputs, 4 transistor outputs
Mini PLC for AC 110-240AC
12 x analog inputs
8 x relay outputs
Mini PLC for DC 12-24V
12 x DC / Analog inputs
8 x relay outputs
PLC to DC 12-24V with 12 DC/ indgange og 8 relæudgange.
Mini PLC for DC 12-24V
12 x DC / Analog inputs
8 x transistor outputs
PLC with 6 analog inputs and 4 relay outputs, DC 12-24V
Local forvarslingslarm to use the fx olietank
Lokal forvarslingslarm til brug til fx olietank med SMS og e-mail
NTP Server - Atomic clock - radio transmitter in Frankfurt DCF77 signal
Standalone NTP time server
Dynamic IP address from DHCP or manual selection of IP address
Antenna is active ferrite root antenna - included
LCD display for date and time
Built-in battery back up RTC
Signal strength display
Configuration via Web browser, Windows or Linux tool
NTP Server - Atomic clock for 19 rack mounting.
Signal from DCF77 in Frankfurt (77.5kHz).
Rod antenna with 5 meter cable with BNC male
Additional antenna cable 50 ohm, BNC male/male
Purchase BNC-SAMLE
With network port and serial port
1U for rack mounting
Power is supplied from 230VAC.
Atomic clock with time from GPS satellites
NTPv4 Stratum-1 GPS Network Time Server.
GPS accurate to 15 nanoseconds (GPS locked).
NTP accurate to 3 microseconds (GPS locked).
Synchronize more than 2 million clients with standard NTP polling frequency.
10/100 Mbit auto-sensing, auto-MDIX Ethernet port.
IPv4 and IPv6 internet protocols.
SNMP v3
Active GPS antenna included
10 meter coax cable included
Dimensions: 144 x 103 x 30 mm
Supply voltage: 7.5VDC / 1A
PSU included
PLC to DC 12-24V with 12v DC / analog inputs and 8 transistor
Standard Cell m / M8 x 1.25 thread; Full load = 10 Kg
Standard cell m / M8 x 1.25 gevind; Full load = 20 Kg
The standard load cell m / M8 x 1.25 thread
S-beam type
Full Load = 5 kg
Maximum load: 7.5kg
Standard Cell m / M8 x 1,25 Anslutningsgänga; Full belastning = 50 kg
1D wireless barcode scanner with USB RF dongle
wireless row side is typically 30 meters
built-in memory for approx. 400 scans
Supports all common 1D barcodes
Radio Technology: Zigbee
Bluetooth from PC to the adapter provides RS232 port
External antenna.
Bluetooth 2.0.
With 2 pcs. as back-to-back link
provides connection between 2 COM ports
Wireless transfer of data between serial ports
Up to 100 meters
Antenna connector is RSMA female
Setup via AT commands
Must be powered from 5 - 40VDC via screw terminal
USB mini cable to A male - for power from 5VDC
2 x screw terminal for any external power supply
Is not battery-powered
Use Putty for testing/setup
Help with setup can be purchased additionally
BNC-ASSEMBLY is a BNC pass-through with 2. BNC socket. For the assembly of RG58 / 59 or RG62 cable.
BNC HD SDI female RCA / phono male Adapter
BNC male connector extends through the two screw clamps.
BNC SDI male to RCA / phono RCA Female Adapter
BNC male to RCA / phono Female Adapter
Sender and receiver for the transfer of DVI signal up to 1.2 km via fiber optics
SC Multi Mode fiber cable PC and monitor
Also transmits audio signals to microphone and speaker
REMAINING STOCK - limited quantity
DVI-D extender with local and remote module up to 50 meters.
Extend DVI-D up to 50 meters via CAT. 6 RJ45 Cable
Do not connect network switch
with built-in EDID (emulate monitor)
Power supplied with 5VDC from the DVI connector on the PCE
External power supply: Buy DC5V / 2A-R-Q
Active HDMI Extender via HDMI cable
Transfer HDMI signal up to 40 meters
PS / 2, CATx extender - extension
Pull a PS / 2 signal up to 100 meters over a CAT5 / 5e / 6/7 UTP network cable
Consists of a transmitter module and a receiver module
Passive, requires no power
Receiver: 2 x PS / 2 and 1 x RJ45 connectors
Transmitter: 2 x PS / 2 and 1 x RJ45 connectors
Extends serial cables up to 1600 meters or printer cables up to 180 meters.
Icron USB extension
With Local extender and the remote extender
Up to 100 meters over UTP / STP.
USB 1.1 up to 12Mbps
USB 2.0 up to 480Mbps
Cat 5e / 6 / 7
5VDC / 3A PSU inck. the remote unit
Supports up to 11 x USB units from 3 USB Hubs
Plug and play, no driver needed
OS Support: Windows, MacOS ™, Linux®, and Chrome OS ™
Icron USB Extension - with LOCAL and remote unit
Up to 100 meters over UTP / STP Cat 5e / 6/7
USB version: USB 1.1 and 2.0
24VDC / 1A PSU incl. the remote unit
Support up to 11 USB devices from three USB Hubs
Icron USB Extension - LOCAL and remote unit
Up to 100 meters over UTP / STP
2 x USB port - Version: USB 1.1 and 2.0
24VDC / 1A PSU incl. the remote unit
PSU kan be connected two LOCAL or remote unit
Support up to 11 USB units from 3 USB Hubs
Icron USB Extension - Local Extender device and Remote Extender device
USB 2.0: Up to 480Mbps
USB 1.1: Up to 12Mbps
1 x USB-B (LEX unit)
1 x RJ45 (LEX unit) to 4 x USB-A (REX device)
1 x RJ45 (REX device)
Dimensions: 100mm x 76mm x 26mm
up to 600mA to each USB port (REX device)
Up to 100 meters above the UTP / STP to 4 x USB - version: USB 1.1 and 2.0
5VDC / 3A PSU (REX device)
Operating temperature: 0 ° C to 50 ° C,
Max. 1920 x 1200 pixels
1 x KVM Extender Console Unit - Remote module
1 x KVM Extender Computer Unit - Local module
1 x 12V DC Power supply included for remote module
1 x KVM cable ( VGA)
USB (2 on Console Unit, 2 on PC Unit)
Only VGA and USB Mouse / Keyboard Transfer
Does Not Transmit Touch from Monitor
USB is only for mouse and keyboard
For point RJ45 network cable up to 200 meters
with Edid Emulation
2 controls for the same PC
Video adjustment
Passive bus card with 1 x PICMG1.3, 4 x PCI, 5 x PCIexpress
Passive bus card with 12x PCI, 1x ISA and 2x PICMG
Passive bus card with 4 x PCI slots, ISA slots 4 x and 6 x PCI-Ex slots
Passive bus card with 2 x PICMG 1.0 slots, 5 x ISA slots 7 x PCI slots, e.g. for S-IND19”OEM+G.
Passive bus card with 12x PCI-X and 2x ePCI-X.
Passive bus card with 12x PCI
6 x ISA and 2 PICMG
Buskort MED 3x PCIE (1x), 1x PCIE (16x), 1x PICMG 1.3