RS232 / RS422 / RS485 / LPT Parallel

MOXA 

8 pcs. External COM ports via Ethernet and Internet

Virtual-Com Port, Pair-Mode - Back to Back
Socket Modes: TCP Server / TCP Client / UDP
easy to configure
cables Not included (RJ45 for DB9)
Supports Win10 and earlier us, Linux

4 COM ports via optical fiber cable
point to point or pount to 4 points
4 x RS232 ports up to 2km with multi mode cable
4 x RS232 ports up to 20km with single mode cable
Buy 100Mbit SFP Module (Multi Mode or Single Mode)
1 x 100 Mbit SFP for LC Duplex Fiber cable
4 x RS232 DB9 male connector
Setup via built-in Web server
62 x 50 x 120 mm
DIN fittings
Display 3 LEDs Displays TX / RX, Network and System Status
Supply voltage: 9 - 32VDC Redundant (not supplied)

4 x RS485/422 COM ports over fiber, fiber network
Extender over fiber with 4 x RS422 / 485
1 x 100 Mbit fiber
Screw terminal block (5 pole)
SFP slot for 100mbit Multi Mode LC Fiber
62 x 50 x 120 mm
Display 3 LEDs Displays TX / RX, Network and System Status
Supply 9 - 32 VDC (not supplied)

RS-422 Serial to Fiber Media Converter

MOXA Converter RS232 / RS422 / RS485 Fiber MultiMode, TCF-142-M-ST

RS232 for USB printer adapter cable
connect USB printer to PC com port
automatic baud rate 
power supply included
DB9 female and USB B
Supply voltage: 5VDC 100mA
GDI printers (without own emulation) are not supported 
See list of supported printers under Downloads

USB-32COM-RM - 32-Port RS-232 USB-to-Serial Adapter, Metal Case, Rack-Mountable.

• High speed
• 128 byte transmit FIFO & 384 byte receive FIFO
• Serial port protected with surge protection of 10KV
• Built-in switching power supply of 100V~240V
• Standard 19-inch, 1U rackmount chassis

USB til 4 ports konverter med DB9 stil til DIN skinne montering.

• Med USB kabel og strømforsyning.
• Metal kabinet.
• 4 X RS422/485 porte
• Hastighed: optil 921.6 Kbpz
• 4 X DB9 hanstik

4-Port RS-232/422/485 USB tilSeriel Adapter, metal kabinet med forlængerkabel. Til DIN skinne montering.

• Plug & Play
• DB37 forlængerkabel til 4 DB9 serielporte
• Metal kabinet.
• 4 X RS232/422/485 porte
• High speed serielport baud rate optil 921.6K bps
• 128 byte transmit FIFO & 384 byte receive FIFO

MOXA, 1-port RS-232 USB to serial adapter.

Compatible with USB 2.0 and 12 Mbps USB data rate
921.6 Kbps maximum baud rate for super fast data transfer
Drivers are provided for Windows, WinCE and Linux
DB9 male. USB2.0 with 80cm cable
LEDs for displaying USB and TxD / RxD activity
15 KV ESD protection for all serial ports
OS support: Windows 11, 10, 8.1, 8, 7, Vista, ME, and XP Windows Server 2022, 2019, 2016, 2012 R2, 2012, 2008 R2, 2008, 2003, 2000, and NT

MOXA USB to RS422/485 converter
Galvanically isolated.
1-port RS-422/485 USB-to-serial converter
Compatible with USB 2.0
12 Mbps USB data rate
921.6 kbps maximum baud rate for super fast data transmission
Drivers provided for Windows, Windows Server, WinCE, and Linux
Mini DB9 female to terminal block adapter for easy wiring
LEDs for indicating USB and TxD/RxD activity
15 kV ESD protection for all serial ports
2 kV electrical isolation
Supports Windows 11

Få en COM-port på PC via USB porten

MOXA USB to RS232/422/485 converter.
Kompatibel med USB 2.0
Software selectable RS232, RS422, 4-wire RS485 and 2-wire RS485
Certified drivers for Windows, WinCE 5.0 and Linux
15 KV ESD protection

Supporting Win10

MOXA USB til RS232/422/485 konverter, isoleret.

• Port powered USB to RS232 / RS485 / RS422 converter
• Optically isolated up to 2KV
• High performance and reliability MOXA brand
• 15N high retention USB type B connector
• Texas Instruments processor chip
• Supports 2-wire and 4-wire RS485
• Indication LED lights for all handshake lines
• WHQL compliant COM drivers included
• Auto detection of data speed
• Automatic Data Direction Control
• Built-in 15 KV ESD electrostatic protection
• DB9 terminal header block included
• USB cable included

Get a RS485 / RS422 port on the PC via the USB port
Software for choosing a fixed COM port - very useful
Compatible with USB 2.0
12 Mbps USB data rate
921.6 kbps maximum baud rate
Driver for Windows, WinCE, and Linux
Mini DB9 male for terminal block adapter
LED for indication of USB and TxD / RxD activity
15 kV ESD protection for 2 kV optical isolation

Moxa MGATE 3180 1port RS232/422/485 Modbus TCP to serial.

• Convert between Modbus TCP and Modbus RTU/ASCII 
• 1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports 
• Supports 16 simultaneous TCP masters with up to 32 simultaneous requests per master 
• Easy hardware setup and configuration

External COM port via Ethernet and Internet
Can also provide Pair connection (back-to-back)
Small size for easy installation
Genuine COM / TTY drivers for Windows and Linux
Standard TCP/IP interface and versatile operating modes
Easy-to-use Windows multi-device server configuration tool
Built-in 15 KV ESD protection for all serial signals
SNMP MIB-II for network management
Configure via Telnet or web browser
Power supply included

External COM ports via Ethernet and Internet
3-in-1 Serial Port: RS-232, RS-422, OR RS-485
Modes: TCP Server, TCP Client, UDP
Ethernet Modem
Pair Connection
Real Com / Tty Drivers for Windows and Linux
2-wire RS-485 with Patented Automatic Data Direction Control (Addc®)
Built-in 15 kV ESD Protection for All Serial Signal

Serielportserver 2 x RS232 / 422 /485 MOXA Nport 5210
Compact design for easy installation
Socket modes: TCP server/TCP client/UDP
Easy-to-use Windows utility for configuring multiple device servers
Supports 10/100M Ethernet
Patented ADDC® (Automatic Data Direction Control) for 2-wire and 4-wire RS-485
SNMP MIB-II for network management

External COM ports via Ethernet and Internet
Compact and but finding room for
Socket Modes: TCP Server / TCP Client / UDP
Windows Utility for Configuring Multiple Device Servers
Supports 10 / 100m Ethernet
2 x DB9 male
SNMP MIB-II for Network Management
Power supply included

2-port RS422/485 serial device servers, MOXA NP5232I
Compact design for easy installation
Socket modes: TCP server/TCP client/UDP
Easy-to-use Windows utility for configuring multiple device servers
Supports 10/100M Ethernet
Patented ADDC® (Automatic Data Direction Control) for 2-wire and 4-wire RS-485
SNMP MIB-II for network management

Fast Ethernet Fiber NIC with PCI Express.

• High bandwidth 100Mbps Network Speed
• Supports Full-Duplex Mode
• Supports IEEE 802.3x Full-Duplex Flow Control
• Supports PCI e x1 bus
• Compliant with PCIe Rev.1.1 Interface
• Supports Jumbo Frame
• Supports High Level VLAN Filtering Function
• Supports IP headers and TCP / UDP checksums offload
• Supports on-board screening of VLAN tagged Ethernet frames
• Supports Wake on LAN
• Supports ASF 2.0

MOXA:

1-port RS422/485 serial device server, MOXA NPort 5110A

Only 1 W power consumption
Speedy 3-step web-based configuration
Surge protection for serial, Ethernet, and power lines
COM port grouping and UDP multicast applications
Screw connectors for secure installation
Real COM/TTY drivers for Windows and Linux
Standard TCP/IP interface and versatile TCP and UDP operation modes
Connect up to 8 TCP hosts

Industrial RS232 to 422/RS485 Serial Converter/ Repeater with 2 KV Isolation, MOXA TCC-100i

RS-232 to RS-422 conversion with RTS/CTS support 
RS-232 to 2-wire or 4-wire RS-485 conversion 
2 KV isolation protection (TCC-100I/TCC-100I-T) 
Wall and DIN-rail mounting 
Plug-in terminal block for easy RS-422/485 wiring 
LED indicators for power, Tx, Rx 
-20 to 60°C operating temperature

Industrial RS422/RS485 Serial Converter/Repeater with 2 KV Isolation, MOXA TCC-120i

Boost serial signal to extend transmission distance
Boost RS422 or RS485 signal, or convert RS422 to RS485
2 KV optical isolation protection
15 KV serial ESD protection

Wall or DIN-rail mounting

Terminal block for easy wiring

Power input from terminal block
DIP switch setting for built-in terminator (120 ohms)

2 ports Mechanical COM port switch, DB9 female / male
1 x DB9 female - I / O
2 x DB9 male - A and B
signal direction (I / O to A or B or A or B to I / O)
All 9 connections Switches
Good quality, but recommended for test use only
120 x 90 x 30mm

High-hanging (MOXA CP-132U-I V2)
Replacement for CP-132IS

Windows Windows 95/98 / ME / NT / 2000
Windows XP / 2003 / Vista / 2008/7/8 / 8.1 / 10 (x86 / x64)
Windows Server 2008 R2 / 2012/2012 R2 / 2016 (x64)
DOS, Windows Embedded CE 5.0 / 6.0, Windows XP Embedded

Linux Linux 2.4. x, 2.6.x, 3.x

Unix-like Systems QNX 6, SCO OpenServer, UnixWare 7, Solaris 10, FreeBSD

NB: høj bagplade

Moxa 8 port RS232 module with RJ45 connector for rack mounting
460.8 Kbps max baud rate
DB25 female connector on the card. Requires a CPU module with 8 or 16 ports
and one or more expansion modules with 8 or 16 ports for a total of a maximum of 32 ports

Moxa: CP104UL-DB9

Make backboard, incl. cables DB9

2 x RS-232/485, 2 x RS-422/485 multiport serial card.
4 x RS-422/485 interface with ADDC up to 921.6 Kbps
RS-485 communication with range up For 1.2 km
Built-in 15 kv ESD
128-byte FIFO
Universal PCI compatible with 3.3 / 5V PCI and PCI-X
Windows XP / 2003 / Vista / 2008/7 / 8 /8.1/10 (x86 / x64)
Windows 95/98 / Me / NT / 2000
Windows Server 2008 R2 / 2012/2012 R2 / 2016/2019 (x64)
DOS
Windows Embedded CE 5.0 / 6.0, Windows XP Embedded

4-port RS232 PCI/ISA card
Bus: PCI ver. 2.1 (32-bit
Up to 921.6 Kbps

Splitter cable not included!
DB37 can be used for 4xDB9M or 4xDB25

EOL no longer in production! last pcs in stock

MOXA Serial Card
4 Ports
Universal PCI
2KV Isolation
128-byte FIFO
3.3 / 5V PCI and PCI-X Combatable
Port 1 and 2 Supports RS232 / 422/485
Extended Temperature -40 to + 85 °

MOXA:

Moxa:

Både 3,3V og 5V

Printerdeling og "mininetværk" i Windows via printerporten.

External COM ports via Ethernet and Internet

Easy IP Address Configuration with LCD Panel
10 / 100Mbit Auto-Sensing Ethernet
4 Serial Ports, With Support for RS422, and RS485 < Br> Built-in 15 kv ESD Surge Protection for All Serial Signals
Versatile Socket Operation Modes, Including TCP Server, TCP Client, and UDP
Choice of Configuration Methods: Web Console, Telnet Console, and Windows Utility
SNMP MIB-II for Network Management
-40 to 75 ° C Operating Temperature

max baud rate 115kb / s for 56kb / s for signal RI
Up to 1.7km at 62.5um fiber cable.
Fiber Optic line multimode, 820nm
Transmitting: RxD , TxD, DTR, DSR, RTS, CTS, DCD, RI or 5x RxD, TxD
RS232 signal including DCE / DTE
Time multiplex, full duplex
RS232 DB9 male 
Plug fiber ST
overvoltage (soft) protection - supply 600W / 1ms
polarity protected with diodes on DC input
optical indication (LED) red - PWR
Yellow - INPUT signal
Green - OUTPUT signal
Supply voltage 10-30VDC or 9 - 24VAC
power consumption max. 2W
Dimensions: 76 x 55 x 115 mm

Clearance

serialport: RS232, RS422 or RS485
speeds from 1200 to 115 Kbps

Moxa CP-114IS
OS Support Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64)

• Windows 8
• Windows Server 2012
• Windows Server 2008
• Windows 10
• Windows 7

4 x DB9

USB 2.0 to 4 x RS232/422/485
High-Speed serial ports 921.6kbps
Driver for Windows, Linux, Mac OS X
LEDs for Power and TxD/RxD activity
ESD protection on USB and serial ports
2.5kV electrical isolation (ISO version only)
Bus powered (non-ISO), Self powered (ISO version)
Wide range of power input 9 - 54V DC
Metal housing
19-inch rack and wall mounts
Wide range of operating temperatures

16 Ports RS-232 Expansion module with RJ45 connector for the MOXA C320 Turbo Series
add-on module for
C320T/8 ISA Rackmount
C320T/16 ISA Rackmount
C320T/8 PCI Rackmount
C320T/16 PCI Rackmount

RS232-RS422/485 konverter
Hastighed: 230.4 kBit/s
RTS/CTS support
Til DIN og vægmontage
Plug-in terminal block til RS422/485

MOXA CBL-RJ45M9-150 - Serial RS-232 cable - RJ-45 (male) for DB-9 (male) 1.5 m -
For Moxa CN2510, CN2610, CP-104, Opt4, Opt8; NPort 5210, 5610, 5630 asdf

Auto Data Switch MP401B Parallel Printer Sharing Device
4 PCs can share the same parallel printer
Automatic switch to parallel printer
Active line is displayed with LED
Timeout programmable from 3 to 70 sec.
Supplied with 9VDC voltage supply
Plug: 5 pcs. DB25 female connector

Serial to HART Convert
Allows 2 pcs. Hart Masters
Point-to-Point or Multi-Drop Hart Mode
Possibility of connecting 15 HART modules
Point-to-point or multi-drop HART mode
for configuration of modules
Isolated COM 1: RS-232 / 422/485
PWR / RUN / ERR INDICATION LED
Built-in Watchdog
4 kV ESD protection