Network products / Wifi / PoE / RJ45-Fiber

95W input
2 x 33W output
2 x RJ45 Gigabit ethernet (10/100/1000)
10K Jumb frames
1M Packet Buffer
8K MAC address table
Surge protection
Metal cabinet & nbsp; with IP67 density
9% - 95% humidity
-40°C ~ 75°C working temperature
With wall mount

5 x 10 / 100Mbps Ethernet ports + 2 & nbsp; x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric )
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature Range: 0 - 70 ° C

5 x 10 / 100Mbps Ethernet ports + 2 x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric )
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature Range: -40 - 70 ° C

5 x 10/100 / 1000Mbps Ethernet ports + 2 x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane ( Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature Range: -10 - 70 ° C

5 x 10/100 / 1000Mbps Ethernet ports + 2 x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane ( Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature Range: -40 to 75 ° C

8 ports 10/100/1000Mbps Fast Ethernet switch
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
16Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -10° to 70°C

8 ports 10/100/1000Mbps Fast Ethernet switch
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
16Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -40° til 75°C

8 ports 10/100 / 1000Mbps Fast Ethernet switch + 2 100 / 1000Mbps SFP slot
Auto MDI / MDI-X Function
Store and Forward Switching Architecture
20Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum housing
DIN-Rail and Wall Mount
Temperature range: -10 ° to & nbsp; 70 ° C

8 & nbsp; ports 10/100 / 1000Mbps Fast Ethernet switch + 2 100 / 1000Mbps SFP slot
Auto MDI / MDI-X Function
Store and Forward Switching Architecture
20Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum housing
DIN-Rail and Wall Mount
Temperature range: -40 ° to 75 ° C

10 ports 10/100/1000Mbps Fast Ethernet switch + 2 100/1000Mbps SFP slot
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -10° til 70°C

10 ports 10/100/1000Mbps Fast Ethernet switch + 2 x 100/1000Mbps SFP slot
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -40° til 75°C

8 ports 10/100/1000Mbps Fast Ethernet switch + 4 x 100/1000Mbps SFP slot
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -10° til 70°C

8 ports 10/100/1000Mbps Fast Ethernet switch + 4 x 100/1000Mbps SFP slot
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Udvidet temperaturområde: -40° til 75°C

16 ports 10/100Mbit + 2 ports 10/100/1000Mbit/mini-GBIC Combo
7.2 Gbps Back-Plane (Switching Fabric)
Store-and-Forward Switching Architecture
1 Mbits Packet Buffer
8K MAC Address Table
Wide-Range Redundant Power Design 12 - 48VDC
Transientbeskyttelse 3.000 VDC på Power Line
6.000 VDC Ethernet ESD Protection
IP30 rpbust aluminum kabinet
DIN-Rail eller Panel monterbar

16 ports 10/100Mbit + 2 ports 100/1000Mbit/mini-GBIC Combo
7.2 Gbps Back-Plane (Switching Fabric)
Store-and-Forward Switching Architecture
1 Mbits Packet Buffer
8K MAC Address Table
Wide-Range Redundant Power Design 12 - 48VDC
Transientbeskyttelse 3.000 VDC på Power Line
6.000 VDC Ethernet ESD Protection
IP30 rpbust aluminum kabinet
DIN-Rail eller Panel monterbar

12 x 10/100/1000Mbps + 4 x 100/1000Mbps SFP porte
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
8K MAC Address tabel
Jumbo Frame Support: 12.2K
Surge Protection: 2,000 VDC Support
ESD Protection: 6,000 VDC Support
Redundant Power Input Design: 12~48VDC
1 Relay Output til Power Failure Warning
IP30 Rugged Metal Case Design
DIN-Rail and Wall Mount Support
Temperaturområde: -10° to 70° C

12 x 10/100/1000Mbps + 4 x 100/1000Mbps SFP porte
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
8K MAC Address tabel
Jumbo Frame Support: 12.2K
Surge Protection: 2,000 VDC Support
ESD Protection: 6,000 VDC Support
Redundant Power Input Design: 12~48VDC
1 Relay Output til Power Failure Warning
IP30 Rugged Metal Case Design
DIN-Rail and Wall Mount Support
Udvidet temperaturområde: -40° to 75° C

5 x 10/100 / 1000Mbps Ethernet Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature range: -10 ° to 70 ° C

5 x 10/100 / 1000Mbps Ethernet Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature range: -40 ° to & nbsp; 75 ° C

8 & nbsp; port 10/100 / 1000Mbps switch and 2 port 10Gbps SFP + fiber slots
Store-and-Forward Switching Architecture
16K MAC Address Table
9,216 bytes Jumbo Frame Support
Surge Protection: 2,000 VDC Support
ESD Protection: 6,000 VDC Support
Redundant Power Input Design: 12 - 48VDC
1 Relay Output for Power Failure Warning
IP30 Rugged Metal Case Design
DIN Rail and Wall Mount Support
Temperature range: -40 ° to 60 ° C

4 x 10/100 / 1000Mbit, PoE + (30W) IEEE 802.3at
1 x 10/100 / 1000Mbit
2 x 100 / 1000Mbit SFP slot
14Gbps Back Plane
8K MAC Address Table
10.0 Kbytes Jumbo Frame
Overvoltage 2kV DC
ESD Protection 6kV DC
Redundant Power Input Design: 48 - 55VDC
1 Relay Output for Power Error Alarm
IP30 Rugged Metal Cabinet
DIN-Rail and Wall Mount including
Operating temperature: -10 - + 70 ° C

4 x 10/100 / 1000Mbit, PoE + (30W) IEEE 802.3at
1 x 10/100 / 1000Mbit
2 x 100 / 1000Mbit SFP slot
14Gbps Back Plane
8K MAC Address Table
10.0 Kbytes Jumbo Frame
Overvoltage 2kV DC
ESD Protection 6kV DC
Redundant Power Input Design: 48 - 55VDC
1 Relay Output for Power Error Alarm
IP30 Rugged Metal Cabinet
DIN-Rail and Wall Mount including
Extended operating temperature: -40 - + 85 ° C

4 x 10/100 / 1000Mbit, PoE + (30W) IEEE 802.3at
1 x 10/100 / 1000Mbit
2 x 100 / 1000Mbit SFP slot
14Gbps Back Plane
8K MAC Address Table
10.0 Kbytes Jumbo Frame
Overvoltage 2kV DC
ESD Protection 6kV DC
Redundant Power Input Design: 12 - 36VDC
1 Relay Output for Power Error Alarm
IP30 Rugged Metal Cabinet
DIN-Rail and Wall Mount including
Extended operating temperature: -10 - + 70 ° C

OEM Bluethooth

Omni antenna
360 degree horizontal signal
6 degree vertical signal
N-type female
outdoor use
high Operating temperature -40 ~ 70 ° C
for wall and pipe assembly
35 (diameter) x 420 mm
including bracket

Radio link for serial transfer on the 2.4GHz band
one for a (P2P) or one for more (P2M)
Range Up to 700 meters with whip-antenna
Range Improves panel antenna < Br> Serial port: RS232 or RS485
supply and COM port is with shed terminals
antenna: R/SMA female
Simple Setup with Turn and Dip Switche
2.4GHz, 16 channels
Supply 10 to 30 VDC

24 x 10/100 / 1000Tx IEEE 802.3 Off / On, PoE + Gigabit Ports (30W / Port) + 4 x Gigabit Copper / SFP Combi Ports
4 x 10/100 / 1000Tx RJ45 + 4 x 100/1000 SFP Slots
Management: SNMP v1 / v2c / v3, WEB, Telnet, Standard MIB
Security: 802.1x (Port Based, MD5 / TLS / TTLS / PEAP Encryption), HTTPS, SSH and SNMPv3
Redundant : Proprietary Ring (Ultra-High-Speed ​​Recovery Time <20 ms), RSTP / STP (802.1w / 1D), MSTP
48VDC Power Input (46-57 VDC for PoE off, 53-57 VDC recommended for PoE at) 2 Relay Outputs
Temperature: -40 ° - 75 ° C - Polarity Protection
Overload Protector
1U Rack Mount Design
IP30 Close

16 x 10/100Mbps RJ45
2 x 10/100/1000Mbit RJ45 (combi)
2 x 100/1000Mbps SFP slot (combi)
7.2 Gbps Back-Plane (Switching Fabric)
Ethernet Ring Redundancy (Recovery Time <20ms)
IEEE 802.1w Rapid Spanning Tree & IEEE 802.1d Spanning Tree Protocol
IEEE 802.1x RADIUS
IEEE 802.1p Class or Service for Traffic Classification & Prioritization
QoS (Quality of Service)
Port Based VLAN & IEEE 802.1Q Tag VLAN
IGMP med Query Mode for Multi-Media applikationer
Port Mirroring for Traffic Monitoring
IP Address Security Management
IP30 robust aluminum kabinet
DIN-Rail eller vægmontering

8 x 10/100/1000Mbps RJ45 med PoE+ (30W)
4 x 100/1000Mbps SFP slot
Netværk redundancy: STP/RSTP/MSTP, og G.8032 ERPS (Recovery Time <50ms)
IPv4/IPv6, og DHCP option 66/67/82
Modbus/TCP protocol for Device Management og monitoring
Konfiguration: Web Console, Telnet, CLI Command
PoE, ping alarm funktion for PoE porte
IGMP v1/v2 for Multicast Traffic Filtering
Udvidet netværk security med IEEE802.1X, SNMP v1/v2c/v3, HTTPS, og SSH/SSL
Port lock function for unauthoriserede address blokering
Automatisk advarsel via e-mail og via relæudgang
Temperatur: -40 - +75°C

8 x 10/100/1000Mbit - RJ45 med auto MDI/MDI-X
2 x SFP slot 100/1000Mbit fiber port
IP30 metalkabinet 
DIN rail og vægmontering
Redundant Power input
12 til 48VDC, redundant, med polaritetsbeskyttelse
AC input 24VAC power input er mulig
6000VDC Ethernet ESD beskyttelse
Udvidet temperatur -40 til 75°C
IEEE 802.3az

Media converter for 100/1000Base-X SFP transceiver
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase 100Mbit / Gigabit SFP modules.
10/100/1000Base-TX
24V / 48V DC power input for PoE
Supply voltage can be 24VAC
Mid-span PoE (PSE) (4.5/7.8)
PoE power out is max. 30 Watt
Alarm in case of link failure
For DIN rail mounting

Access Point Antenna to 2.4 / 5 / 5,8GHz
Dual Band
Hard plastic - black
50 ohm
RSMA type Han (brass) Connector
Length: 160mm
8 DBI High Gain - 6dB gain

Please note this product is EOL and of older vintage. We only recommend it to users who have experience with old analogue model/telephone technology.

If you don't have experience with the older technology, don't jump into it, that's our recommendation.

LTE 3G 2G GSM antenna on magnetic base
3.5 dBi
Waterproof - IP65 tight
SMA male connector (sleeve + pin)
3.5m cable
600 - 900 / 1700 - 2600
Dimensions: height 110 mm, foot diameter 30 mm

Access Point antenna for 2.4 / 5.8GHz
9 dBi High Gain
Indoors
Dual Band
Hard plastic - black
50 ohms
RP SMA male (brass) connector
Length: 39cm
Cracked joint

In-Wall Dual Band Access Point / Bridge / Client
1200Mbps - 100mW
4 x 2dBi Internal Antennas
1 x RJ45 PoE + PD port Internal access - Gigabit
2 x RJ45 port, external Access - Gigabit
1 x RJ11 Port
Max. SSID 8
Max. Clients 128
IGMP proxy
SSID for VLAN Mapping (4 SSID)
Power: PoE + 48VDC
Temp -20 - + 55 ° C
Goal: 86 x 86 x 45 mm
In-Wall Back piece: 86 x 86 x 45 mm

1000 meter - network extender over coax cable.
Poe transferred in cable
1 x 10 / 100mbit base-TX RJ45
Auto-Negotiation / Auto-MDI / MDI-X
Poe Standard: IEEE 802.3AT / BY
PoE Output: 48-56VDC Max. 25 Watt
PoE Mode: End-Span, RJ45 Pin 1/2 (+), 3/6 (-)
1 x BNC Hun - RG59 Coax
Max. Distance: 200m w / Poe +, 1000m w / Poe, 1600m without Poe
Power supplied from 48-56VDC min. 2amp

MPCIE WLAN modul
fra 2.412 til 2.462 GHz
802.11b/g
Power output 177 mW

PCI-Express micro card
IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n
Bluetooth 4.0
Wireless 2.4GHz + 5GHz

RJ45 two RJ45 Thunder Protector (IP only)
Thunder Protector protect two lightning over-voltage
Surge Over-voltage and electrostatic discharge.
Maximum discharge current 10KA
Aluminum Case with two RJ45 Port

For harsh industrial and outdoor environments.
Voltage over Ethernet - PoE - no external voltage source
Extend a PoE voltage and data signal up to 100m
PoE output power: up to 22Watt
Over a single CAT 6 cable (STP cables are recommended).
Cascade: Maximum 4 ETH-BOOST-POE-1G-U units in extension
Extends the distance up to 500m
IP66

Wifi antenna, dual band
2.4/5GHz
For mounting on a car window or window
3 meter cable
RP-SMA Male

Original Intel antenna
2.5 / 5GHz
2 x RSMA male, 1.2 meter cable
Suitable for wall mounting

> Ø54 x 24mm, M12 thread, 19mm
Bandwidth ± 90/280 MHz
Gain 3dBi
Vertical vertical
Max wind speed 200km / h

Omni antenna for 4G, LTE, vandal-proof
Screw Mounting, M12 Thread
3 meter Cable
Temperature: -40 ℃ ~ + 85 ℃
Connector: SMA Male

& nbsp; Antenna to GSM, GPS, FM, AM
5MHz Bandwidth
Screw Mounting
4m Cable
Temperature: -40 ℃ ~ + 85 ℃
Full IP67 Waterproof

Antenna for GPS, 2.4GHz WIFI, 4G, LTE
5MHz bandwidth
Screw mounting
4 meter cable
Temperature: -40 - +85℃
Full IP67 Waterproof

8-port Unmanaged 10 / 100M + 2-port Gigabit RJ45
2 x 1000BASE-X mini-GBIC SFP combo interface
PoE + is 32 Watt
Total PoE power is 120 watts
IEEE 802.3af / to End-span
Each port provides 52VDC to PoE equipment
Auto deteketere PoE equipment
Provides power to the max. 100meter
Extended mode without PoE, the distance up to 250meter
Equipped with smart LCD
Normal, VLAN, Extend
Supply voltage: 100 - 240VAC
Dimensions: 280 x 180 x 44 mm (1U)

The 16-port 10/100Mbit + 2 Gigabit RJ45
2 x 1000BASE-X mini-GBIC SFP combo interface.
PoE + is 32 Watt
Max. PoE power is 300 watts
IEEE 802.3af / at End-span.
Each port provides 54VDC to PoE equipment.
Auto deteketere PoE equipment.
Provides PoE power to the max. 100meters.
extended mode without PoE, the distance up to 250meter.
Equipped with smart LCD.
Dimensions: 440 x 233 x 44 mm (1U)
Operating temperature: -10 - + 60 ° C
Supply voltage: 100 - 240VAC, 5A

Managed Industrial Switch. 24 x RJ45, 4 x SFP
24 x 10/100/1000Mbit RJ45 Porte PoE++
IEEE 802.3at / af / bt - Ultra Poe (90Watt) End / Mid-Span
Total PoE effect is 720W
4 x 100/1000Mbit mini-GBIC / SFP slots, combo with 4 Gbit RJ45 SFP
VLAN - IEEE 802.1Q brand VLAN
VLAN (Q-in-Q) - IEEE 802.1ad
Protocol VLAN , Voice VLAN, Private VLAN, Management VLAN, GVRP
IGMP Snooping V2 and V3
MLD Snooping V1, V2
Port Security for Source Mac Address Filtering
DHCP Snooping To filter unwanted DHCP messages
Dim: 440 x 300 x 44.5 mm (1U)
Weight: 5kg
supply voltage: 100 - 240vac

16 x 10/100/1000Mbit RJ45
16 porte med PoE Ultra (75W per port)
4 100/1000BASE-X mini-GBIC/SFP slot
2 10Gbit SFP+ slot
RJ45 console interface til management og opsætning
PoE maks. er 400Watt, end-span og mid-span.
PoE power feeding op til 100 meter
Total PoE management
IGMP Snooping
MLD Snooping
Maks. 8 VLAN interface

5 x 10/100 / 1000Mbit RJ-45 with 4 ports with PoE +
PoE + is 30.8 Watt. PoE max 134 watts, end-span
Auto detects PoE equipment and protects against damage by non-PoE equipment
PoE up to 100 meters
Layer 2 switch with auto-negotiation
IP30 aluminum metal cabinet, DIN Fittings
DIN Rail and Wall Mount
48V DC Redundant Power Input
EFT Protection Up to 6kV for Power Line
6kV Protection on Ethernet Port
-40 to + 75 ° C & nbsp;

Ethernet adapter. USB-C 3.1, 2 x RJ45 10/100/1000 & nbsp; Full Duplex
USB-C 3.1 Male connector for IEEE 802.3i/u/ab
Power supply via USB
OS support: Windows & nbsp; 7 /8/8.1/10 (32/64-Bit), Mac OS X 10.6 / 10.7 / 10.8 / 10.9 / 10.10, Linux 2.6.27 and later

10/100/1000Mbit network extender / PoE splitter
1 x PoE input (PD) PoE++ 95W
4 x PoE outputs (PSE) PoE+ 32W
Up to 32W per PoE port, 65W total power budget (see specifications)
Extend the network cable over the maximum 100 meters for PoE solutions
Extenders are powered by PoE and pass PoE on to the next extender
Dimensions: 168 x 93 x 32 mm, Weight: 403g

Embedded high power injector max. 60W for each PoE port
IEEE 802.3at/af PoE compliant
Power Protection: OVP, OCP, SCP
Compact design with wall mounted capability
UL/CB -certified external power adaptor of 120w
Per port PoE(Mode A, Mode B) On-Off Control by DIP Switch

5 port 10/100/1000 Switch with 4 poE ports
4 x PoE RJ45
1 x Uplink RJ45
& lt; 8W per PoE & Ethernet standard: IEEE802.3, IEEE 802.3u , IEEE802.3ab, IEEE802.3af / at
Power Supply: DC48V - 53V

5 Ports & nbsp; Switch with 4 PoE ports
4 x PoE RJ45
1 x Uplink RJ45
1 x SFP
Ethernet standard: IEEE802.3, IEEE 802.3u, IEEE802.3af / at
Power Supply: DC48V - 52V

PASSIVE PoE means that the switch supply voltage is on the 4 PSE ports
only used for PoE 802.3af / at PD equipment but ONLY with 48-55VDC supply voltage to the switch
5 port 10 / 100Mbit Switch with 4 PoE ports
4 x PoE RJ45 PASSIVE PoE
1 x RJ45 Uplink
48Watt per PASSIVE PoE port
Supply voltage: 12V DC - 55V

PoE+ Injector via Ethernet cable, 30Watt
Anit interference protected
OVERLOAD and monitor protected
Network: 10/100 / 1000Mbps
RJ45 Pin Assignment: 1/2 (-), 3/6 (+)
Power Supply: 100 - 240Vac

Power over Ethernet - No Additional Power Source Required
Extend a POE signal max. 100m over a single CAT cable (cat 5 or higher)

PoE splitter with voltage selector for 5, 9.12.18 Volts
Up to max. 30W
IEEE 602.3af/at(POE) IEEE 802.3 (Ethernet)
IEEE 802.3U, IEEE 802.3ab (Gigabit Ethernet)
1 x 10/100/1000 Mbit RJ45 PoE port (data + power input)
1 x 10/100/1000 Mbit RJ45 LAN port (data only)
1 x DC plug 5.5 / 2.1 mm - Output voltage (DC out)
Cat. 5E, 6 UTP
DC voltage from PoE switch or Injector 36 to 57 VDC
2 x RJ45 Note PoE does not go back to the RJ45 output - only data!
ROHS, CE, FCC (FCC Part15, Class B)

Extended Operating Temperature -40° ~ 80°C
16-Port 10/100TX + 2-Port 10/100/1000T/mini-GBIC Combo
7.2 Gbps Back-Plane (Switching Fabric)
Ethernet Ring Redundancy (Recovery Time <20ms)
IEEE 802.1w Rapid Spanning Tree & IEEE 802.1d Spanning Tree Protocol
IEEE 802.1x RADIUS
IEEE 802.1p Class or Service for Traffic Classification & Prioritization
QoS (Quality of Service)
Supports Port Based VLAN & IEEE 802.1Q Tag VLAN
IGMP with Query Mode for Multi-Media Applications
Port Mirroring for Traffic Monitoring
IP Address Security Management to Prevent Unauthorized Access
UL Class I, Division 2 Certified
IP30 Rugged Aluminum Case Design
DIN-Rail or Panel Mountable

4 x RJ45 port with PoE ++ (Ultra PoE)
1 x RJ 45 Uplink port (not PoE).
60W for every PoE-Port
Power Budget is 120 watts
IEEE 802.3at / by PoE.
Dip on / off PoE 
Power supply: 100 - 240VAC 
Operating temperature: 0 - +40°C
Size: 119 x 88 x 27 mm
Weight: 1.3 kg

Dual-Polarized 2.4GHz Panel Antenna Provides Best Connect To Portable Devices With Wifi
Has Both Horizontal And Vertical Polarization In The Same Antenna
14dBi High gain Antenna
Horisontal and vertical: 30°
IP55 Close
Compact Lighting Lighting Antenna to the 2 N-female connector
Ideal for good wireless coverage

AUI converter for BNC cable, external supply
1 x DB15 Han to 10 Base-5 (AUI)
1 x BNC Jack for 10 Base-2
Max. Cable length: 500m thick coax, 182m thin coax
LED: Power, COL, LINK, TP / RCV
IEEE 802.3 10Base-5/2 Ethernet
0 to 55 ° C
10 to 90% ( Non-condensing)

10Gbit fiber the RJ45 Media converter
For Single Mode or Multi Mode SFP module
Extended temperature range
1 x RJ45 10G/5G/2.5G/1G/100M BASE-T
1 x 10GBASE-SR/LR SFP slot
The SFP module is standard with an LC connector
Additional SFP module
Supply voltage: 12 - 48VDC
PSU not included
Operating temperature -40 to +75°C
YOUR bracket

10GBase-BX SFP optical transceiver
To 1-Simplex fiber cable
1 x LC Single Mode 1-core cable
0 ~ 60 ° C
Up to 20km
TX: 1270nm , RX: 1330nm
Note: Reverse TX / RX frequencies at the other end of the fiber

Crimping pliers for easy and fast production of cables
For RJ45 and RJ11 cable and modular connectors
The new connectors have wiring through for faster and secure mounting
When the cable is crimped on the connector, the cable ends are automatically cut by
Squeezes the conductors down the plug terminals and cuts the ends in the same workflow.

10GBase-BX
Single Mode
0 ~ 60°C
Op til 20km
TX: 1330nm, RX: 1270nm

2 pieces. VDSL2 + A can be established network connection over the 2-wire cable

Up to 1.4 Km Ethernet bridge via the 2 pieces. VDSL2 + A
speed depends on cable and length - up to 90Mbps
Automatically adapts speed to highest speed
can also communicate with ETH-VDSL2 + 4 + (4 port switch)
1 x LAN 10/100 BASE-T RJ45 auto-MDI / MDI-X port
1 x VDSL2 + A RJ11 she
supply: 5VDC, 2A power supply included
By 2 pcs. ETH-VDSL2 + A one shall be put to the CPE and the other to CO.
Connect each end of the 2-wire twisted pair cable.
ESD protection: 6KV DC Kirke DIN mounting, wall mounting. Your hardware purchased
SOLD SEPARATELY! Order 2 pieces for one set.

Unmanaged 8 ports 10/100/1000Mbit switch
1.5Mbits SRAM packet buffer
IP30 metal case
DIN rail and wall-mount
-40 to 75 degrees C operating temperature
12 to 48V DC input (power supply is not included)

Industrial 4 Port Gigabit Ethernet PoE Switch
4 x Copper Ports - 10/100 / 1000Mbit RJ45
Managed Switch
IP30 Cabinet
DIN Rail and Wall Mounting
Supply: 45-57VDC

Operating Temp. -20- 70 ° C

24 x 10/100 / 1000BASE-T Gigabit RJ45 copper ports
4 x 10GBASE-SR / LR SFP + ports, compatible with 1000BASE-SX / LX / BX SFP
RJ45 console port
LCD touch screen
Operating temperature 0 to +50 ° C
Humidity 5 ~ 95% (non-condensing)

24 Ports Managed Ethernet Switch with PoE
PoE + (36Watt). Total PoE power is 600Watt
24 x RJ45 10/100 / 1000Mbit
4 x SFP 10Gbit, 10GBASE-SR / SL SFP + interfaces (Port-25 to Port-28)
128Gbps (non blocking)
Data buffer with 32M bits
IEEE 802.3x pause frame for full-duplex
Dimensions: 440 x 300 x 56 mm, 1.25U high
Weight: 5.4kg
Supply voltage 100-240 VAC
POE standard IEEE 802.3af / 802.3at / 802.3bt
Auto generation of port configuration
VLAN: VLAN edge, 802.1Q, VLAN protocol basseret
MVR (Multicast VLAN Regitration)

8 x 10/100 / 1000BASE-T RJ45 Auto-MDI / MDIX Ports
2 x 1000BASE-SX / LX / BX SFP Interface
8 POE Injector Ports with 802.3ay / of
PoE Standard 802.3at
60GB non-blocking
32Mbits Data buffer
IEEE 802.3X pause frame for duplex
IP30 aluminum
Din rail kit and wall mounting
Alarm relay 1A, 24V DC
2 x Digital output (DI)
2 x Digital output (DO) 24v DC, 100mA max
Dimensions: 72 x 107 x 152mm
Weight: 1684g & nbsp;
Supply: 48-56 V DC