Network products / Wifi / PoE / RJ45-Fiber

1 x 10/100/1000Mbit RJ45
1 x 1000Mbit SFP (only for Gigabit SFP modules)
up to 80km with Single Mode fiber
up to 550m with Multi Mode fiber
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
BIDI with LC or with SC (Simplex fiber)
Purchase additional Gigabit SFP modules.
up to 100m with Cat.5e or Cat.6
5% to 95% humidity
5VDC power supply included
-0°C to +70°C

WLAN up to 150Mbps (Single radio 2.4GHz)
Industrial 1x1 Single Input Single Output (SISO)
IEEE 802.11 b / g
2 x 10 / 100Base-TX WAN / LAN Port
Chipset: Qualcomm / Atheros AR9331 SoC
Tx Power (EIRP) 21 dB for 2.4GHz
5 dBi dipole antenna
WPA, WPA2, TKIP, AES
Power Input: 9 - 48VDC / 2W , & nbsp; 4-pin Terminal Block
Reverse Polarity Protection
IP30 Dense Housing & DIN Rail & nbsp; and Wall Mounting
Operating Temperature: 0 ° C to 60 ° C
Weight: 1 kg Dimensions: 26 x 95 x 75 mm

WLAN up to 150MBps (Single radio 2.4GHz)
Industrial 1x1 Single Input Single Output (SISO)
IEEE 802.11 b / g
2 * 10 / 100Base-TX WAN / LAN Port < br> Chipset: Qualcomm / Atheros AR9331 SoC
Tx Power (EIRP) 21 dB for 2.4GHz
WPA, WPA2, TKIP, AES
Power Input: 9 ~ 48VDC in 4-Pin Terminal Block
Reverse Polarity Protection
IP30 Protection
DIN Rail & Wall Mounting
Operating Temperature: -40 ° to 75 ° C & nbsp;
Weight: 1.0 lbs (approx. 1 kg)
Dimensions: 26 x 95 x 75 mm

Industrial access point with Atheros XSPAN chipset
IEEE 802.11 a / b / g / n
2 x 10 / 100Base-TX WAN / LAN Ports
2 x external antennas
WLAN single radio
Tx Power 21 dB for 2.4GHz
Tx Power 18BB for 5GHz
WPA, WPA2, TKIP, AES
Power Input: 9 ~ 48VDC in 6-Pin Terminal Block
Reverse Polarity Protection > IP30 Density
DIN rail or wall mounting
Operating temperature: 0 ° C to 60 ° C
Dimensions: 30 x 140 x 95mm
Weight: about 1 KG (0.60 lbs)

5GHz, 900Mbps AP, Gateway, Repeater, Bridge, WISP
802.11 b/g/n/ac
2T2R architecture with dual-polarizing 14dBi antennas built-in
Transmission power: 100mW
2 x 10/100/1000Mbps RJ45 Ethernet
For pipe mounting and wall mounting - clamping band included
Supports WAN connection in DHCP, Static IP, PPPoE
WPA/WPA2, WPA-PSK/WPA2-PSK and 802.1X RADIUS authentication
IP55
Power supply: PoE+ (48Vdc) or 12VDC 1A (via DC jack)
Operating temperature: -20 - +70°C
Dimensions: 260 x 87 x 38 mm

Outdoor point two point / bridge
Buy 2 pcs. For a Bridge (Link)
2.4GHz,
Range: Up to 3km (Bridge)
IEEE 802.11b / g / n
11 DBI Directional antennas - X-polarized
Power supplies Via 24V / 1a passive poe

4 x 10/100 / 1000Tx IEEE 802.3at PoE + Compliant with 30W per Port
1 x 10/100 / 1000Tx & nbsp;
2 x 100/1000 SFP
Auto MDI / MDI-X Function < br> 14Gbps Back-Plane (Switching Fabric)
8K MAC Address
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Power Supply: 12 ~ 36VDC
Built-in 1 x Relay Output for Power Failure Detection
IP30 Rugged Metal Case Design
Your rail and wall mounting
Operating temperature -40 ° to 75 ° C
Dimensions: 46 x 99 x 142mm
Weight : 1.4 Lb

Supporter 6-Port 10 / 100Tx and 2 x Gigabit Combo Ports
2 x 10/100 / 1000Tx RJ45
2 x 100/1000 SFP Slots
Supporter Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
8K MAC Address Table
Surge Protection: 2,000 VDC Support
ESD Protection: 6,000 VDC Support
UL Class I, Division 2 Certified
Redundant Power Input Design: 12 ~ 48VDC
Built-in 1 x Relay Output for Power Failure Warning
IP30 Rugged Metal
Wall and DIN Rail Mounting
Operating Temperature EOT: -40 ° to 75 ° C

Supporter 6-Port 10 / 100Tx and 2 x Gigabit Combo Ports
2 x 10/100 / 1000Tx RJ45
2 x 100/1000 SFP Slots
Supporter Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
8K MAC Address Table
Surge Protection: 2,000 VDC Support
ESD Protection: 6,000 VDC Support
UL Class I, Division 2 Certified
Redundant Power Input Design: 12 ~ 48VDC
Built-in 1 x Relay Output for Power Failure Warning
IP30 Rugged Metal
Wall and DIN Rail Mounting
Operating Temperature EOT: -40 ° to 75 ° C

Supporter 8-Port 10 / 100Tx
2 Gigabit Combo Ports
6 x RJ45 Port 10 / 100Tx
2 x 10/100/100 RJ45
2 x 100/1000 SFP Slots
Supporter Auto MDI / MDI-X
Non-Blocking Switching Fabric
8K MAC Address
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
UL Class I, Division 2 Certified
Redundant Power Input Design: 12 ~ 48VDC
1 x built-in relay Output for Power Failure warning
IP30 Rugged Metal Case Design
DIN rail and wall mounting
Operating temperature STD: -10 ° to 70 ° C

Supporter 8-Port 10 / 100Tx
2 Gigabit Combo Ports
6 x RJ45 Port 10 / 100Tx
2 x 10/100/100 RJ45
2 x 100/1000 SFP Slots
Supporter Auto MDI / MDI-X
Non-Blocking Switching Fabric
8K MAC Address
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
UL Class I, Division 2 Certified
Redundant Power Input Design: 12 ~ 48VDC
1 x Built-in Relay Output for Power Failure Warning
IP30 Rugged Metal Case Design
DIN Rail and Wall Mounting
Operating Temperature EOT: -40 ° to 75 ° C

5 x 10 / 100Tx RJ45 Fast Ethernet
M12 (D-coded female) Connector IP67 Protected
IP67 Plastic Case Design
RJ45 Port Support Auto MDI / MDI-X
Auto Negotiation Speed, Half / Full Duplex
Store-and-Forward Switching Architecture
Supply Voltage: 12 ~ 48VDC
Power Polarity Reverse Protection
Overload Current Protection
DIN Rail or Wall Mounting
Dimensions: 37.13 x 215.73 x 32.8 mm (W x H x D)
Operating temperature: STD: -10 ° C to 70 ° C

5 x 10 / 100Tx RJ45 fast Ethernet
M12 (D-coded female) Connector IP67 protected
IP67 Plastic Case Design
RJ45 Port Support Auto MDI / MDI-X
Auto Negotiation speed, Half / Full Duplex
Store-and-Forward Switching Architecture
Power Supply: 12 ~ 48VDC
Power Polarity Reverse Protection
Overload Current Protection
DIN-Rail or Wall Mounting
Dimensions: 37.13 x 215.73 x 32.8 mm (W x H x D)
Operating temperature: EOT: -40 ° C to 75 ° C

8 x 10/100 / 1000Base-T (X) RJ45
PoE (P.S.E.) Ports
IEEE 802.3at
Up to 30 Watts Per Port
9.6Kbytes Jumbo Frame
Supply Voltage, Dual Wide Range 12 ~ 36VDC
Auto-Negotiation & amp; Auto-MDI / MDI-X
Store-and-Forward Transmission, Flow Control, IP-30 Housing Design
DIN Rail and Wall Mounting for UL Class I, Division 2 Certified

8 x 10/100 / 1000Tx RJ45 for PoE + (30W / port) IEEE 802.3at for 2 x 100/1000 SFP ports for Auto MDI / MDI-X Function for Store-and- Forward Switching Architecture
20Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC for UL Class I , Division 2 Certified
Supply Voltage: 48 ~ 55VDC
Built-in Relay Output for Power Failure for IP30 Rugged Metal Case Design for DIN Rail and Wall Mounting - Operating Temperature: -40 ° to 75 ° C

8 x 10/100 / 1000Tx RJ45 for PoE + (30W / port) IEEE 802.3at PoE for 2 x 100/1000 SFP ports for Auto MDI / MDI-X Function
Store -and-Forward Switching Architecture
20Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
UL Class I, Division 2 Certified
Supply Voltage: 48 ~ 55VDC
Built-in Relay Output for Power Failure for IP30 Rugged Metal Case Design for DIN Rail and Wall Mounting at Operating Temperature STD: -10 ° to 70 DEG C

8 x 10/100 / 1000Tx RJ45 (30W / port)
2 x 10/100 / 1000Tx RJ45
2 x 100/1000 SFP Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC > UL Class I, Division 2 Certified
Power supply: 48 ~ 55VDC
Built-in relay Output for Power Failure
IP30 Rugged Metal Case Design
DIN rail and Wall mounting
Operating temperature STD: -10 ° to 70 ° C

8 x 10/100 / 1000Tx RJ45 (30W / port)
2 x 10/100 / 1000Tx RJ45
2 x 100/1000 SFP Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC > UL Class I, Division 2 Certified
Power Supply: 48 ~ 55VDC
Built-in Relay Output for Power Failure
IP30 Rugged Metal Case Design
DIN Rail and Wall Mounting
Operating Temperature STD: -40 ° to 75 ° C

8 x 10/100 / 1000Tx RJ45 (30W / port)
4 x 100/1000 SFP Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Supply Voltage: 48 ~ 55VDC
Built-in Relay Output to Power Failure
IP30 Rugged Metal Case Design
DIN Rail and Wall Mounting
Operating Temperature STD: -10 ° to 70 ° C

8 x 10/100 / 1000Tx RJ45
PoE+ (30W / port)
4 x 100/1000 SFP Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Supply Voltage: 48 ~ 55VDC
Built-in Relay Output for Power Failure
IP30 Rugged Metal Case Design
DIN Rail and Wall Mounting
Operating Temperature: -40 ° to 75 ° C

12 x 10/100 / 1000Tx RJ45 (30W / port) IEEE 802.3at PoE + 4 x 100/1000 SFP Ports
Store-and-Forward Switching Architecture
8K MAC Address Table
12.2Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Power Supply: 48 ~ 55VDC
Built-in Relay Output for Power Failure
IP30 Rugged Metal Case Design
DIN- Rail and Wall Mounting
Operating Temperature STD: -10 ° to 70 ° C

12 x 10/100 / 1000Tx RJ45
PoE+ (30W / port) IEEE 802.3at
4 x 100/1000 SFP Ports
Store-and-Forward Switching Architecture
8K MAC Address Table
12.2Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Supply Voltage: 48 ~ 55VDC
Built-in Relay Output for Power Failure
IP30 Rugged Metal Case Design
DIN- Rail and Wall Mounting
Operating Temperature: -40 ° to 75 ° C

24 x 10/100/1000Tx RJ45 (30W/port) IEEE 802.3at PoE+
2 x Gigabit combo (2 x RJ45, 2 x FTP)
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Power supply: 48~55VDC
Built-in relay Output for Power Failure
1U 19" Rackmount design
Operating temperature STD: -10° to 70° C

24 x 10/100 / 1000Tx RJ45 (30W / port) IEEE 802.3at PoE + 2 x Gigabit Combo (2 x RJ45, 2 x FTP)
Auto MDI / MDI-X Function
Store -and-Forward Switching Architecture
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Power Supply: 48 ~ 55VDC
Built-in Relay Output for Power Failure
1U 19 "Rackmount design
Operating temperature STD: 40 ° to 75 ° C

8 x ports 10/100 / 1000Tx, IEEE 802.3at Compliant PoE +
Redundant supply voltage: 24 - 55VDC
Built-in Power Booster Design for PoE / PoE +
Built-in relay output - Power / PoE Failure warning
Bypass Design for Daisy Chain Redundancy
Digital Input / Digital Output
IP67 Rugged Waterproof Metal Design with M12 X-Coded Connection to Ensure Close and Robust Connection
Wall Mounting
Operating Temperature: -10 ° to 60 ° C
Dimensions: 253.57 x 122 x 116.12 mm (W x H x D)

1000Mbit Multimode Media Converter for RJ45
1 x RJ45 10/100 / 1000BaseT
1 x 1000BaseSX / LX with SC connector Multimode
Back-Pressure in Half-Duplex
Auto MDI / MDI -X function in Store-and-forward mechanism
Up to 220m / 550m
Dimensions: 97 x 70 x 26 mm
Operating temperature: 0 - + 50 ° C
Power supply: 5VDC / 2A included

Media converter for 100/1000Base-X SFP transceiver
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase additional Gigabit SFP modules.
1 x RJ45 10/100/1000Base-TX PoE+
1 x SFP 100/1000 Mbit
Power supply: 48-56VDC
PSU not included
End-span PoE (1/2(+), 3/6(-))
PoE power is max. 36 Watt
DIN rail or wall mounting
Temperature: -40 to +75°C
Dimensions: 30 x 70 x 104 mm

Outdoor / Indoor Omni Antenna for 2.4GHz and 5GHz
Frequency Range: 2400 to 6000MHz
Gain: 6 - 7dBi
Vertical Polarization
Half Power Beam Width (-3dB) - Horizontal 360 °
Half Power Beam Width (-3dB) - vertical 30 °
XPD (Cross Polarization Discrimination) & gt; 18d
N female connector
Diameter: ø38 / 62mm
Dimensions: 290 x 26mm
Weight: 0.30kg
IP64
Operating temperature: -40 ° C - 80 ° C

24 x 10/100 / 1000Tx RJ45
2 x Gigabit Combo Ports
2 x 10/100 / 1000Tx RJ45
2 x 100/1000 SFP Slots
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input Design: 90 ~ 264VAC
1 x Built-in Relay Output for Power Failure
IP40 Rugged Metal Case Design
1U 19 "Rackmount Design Support
Operating Temperature: -10 ° to 70 ° C

8 x 10/100 / 1000Tx RJ45 IEEE 802.3at PoE + 2 x 100/1000 SFP Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
20Gbps Back -Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
UL Class I, Division 2 Certified
Power Supply : 48 ~ 55VDC
Built-in relay Output for Power Failure
IP30 Rugged Metal Case Design
DIN-Rail and Wall mounting
Operating temperature STD: -10 ° to 70 ° C

USB 3.2 type-C up to 5Gbit
Powered by USB Bus
IEEE 802.3 / 802 / 3h / 802.3ab
802.3az EEE (Energy Efficient Ethernet)
10/100 / 1000Mbit < br> IEEE 802.3x flow control at full duplex
Jumbo frame up to 4KB
IPv4 / IPv6
MDI / MDIX auto-crossover

Break 100 meter border with VDSL over RG59 Coax cable
1 x RJ45 10/100 / 1000Mbit
Up to 300mbit / s - duplex (automatic speed optimization)
Unroubing Data connection
Temperature: 0-50 ° C
5VDC 2A Power supply included
75Ω cable must be used
Use 2 pcs. Eth-VDSL-RG + G to a connection

2 x Wifi hardware consisting of APs antennas and power supplies
Connect 2 LAN networks between 2 buildings, wireless.
PoE supply (optional).
Lightning transient protection included - placed in the masts

Gigabit SFP USB 3.0 network adapter
SFP female and USB-A male
Powered by USB
OS Support: Windows XP / Vista / 7/8 / 8.1 / 10 32 / 64- Bit, Mac OS 10.6 ~ 10.13, Linux

RJ45 lock
RJ45 lock to stop accidental removal of the plug
Material: PLA (Plastic)
Dimensions: 15.5 x 13.8 x 18.3 mm

POE INJECTOR via Ethernet cable, 60 watts
anit interference protected
Overload and supervise protected
Network: 10/100 / 1000Mbps
RJ45 Pin Assignment: 1/2, 7/8 (- ), 3/6, 4/5 (+)
Power Supply: 100 - 240vac
Measure: 168 x 74 x 44 mm

1000Mbit Multi Mode Media Converter with SC connector to RJ45
1000BASE-SX / LX to 10/100/1000BASE-T 802.3at PoE
1 x RJ45 10/100/1000base-T with PoE+ (30W)
1 x 1000base-SX/LX Fiber - SC connector Multi Mode
Multi Mode 62.5/125my / 50/125my
IEEE 802.3/802.3u/802.3ab/802.3z/802.3x Ethernet standard
DIN rail mounting
Supply voltages: 12 - 48VDC or 24VAC with PoE out
PSU not included
IP30
Operating temperature: -40°C to +75°C

Dual-polarized 5GHz MIMO panel antenna provides the best connection to portable devices with Wifi
have both horizontal and vertical polarization in the same antenna
Vertical: 30 degrees
Horizontal: 30 degrees
14dBi high gain antenna
IP55
compact antenna with lightning protection - 2 x N-2 female connector
Dimensions: 228 x 15 x 228mm (excl. connector)
Mast clamp

RJ45 Cat 5e / 6a
Wall installation to 8-conductor (8P8C)
TIA-568A / B colored Heating installation
No tools are needed, easy installation

RJ45 dust cap - blanking
Put into unused RJ45 port Kirke protection
flexible and fits all RJ45 ports.
Sold individually

12 mini slots media converter box / casing
1U rack mounting | 1/10 / 1000M
Dimensions: 485 (W) x 270 (D) x 44.5 (H)
Operating temperature: 0- 50

Quick and Easy PoE tester
IEEE 802.3af / at
UTP Cat 5 or above
100 meters max.
Dimensions: 23 x 70.1 x 22 mm | Operating temperature: -10 ~ 60 C
weight: 20g

5 x 10 / 100TX Ports with Auto MDI / MDI-X
Good size for industrial use
18-32VDC
relay port alerting
Support AC 1.5KV Hi-pot isolation protection IP31 Aluminum
Operating temperature: -25 to 70 degrees
Dimensions: 111.8mm (H) x 30mm (W) x 98.2mm (D)
Weight: 290g box without

Dual data-rate of 1.25Gbps / 1.063Gbps
1310nm FP laser and PIN photodetector for 10km transmission
Compatible with SFP MSA and SFF-8472 with duplex LC receptacle
Compatible with SONET OC-24 LR-1
Switch to switch interface
Router / server interface
+ 3.3V single power supply
Operating temperature: 0 to +70°C

The data rate of 1.25Gbps to fiber cables
1310nm DFB laser and PIN photodetector for 40km transmission
compatible with SFP MSA and SFF-8472 with duplex LC receptacle
Compatible with SONET OC-24 LR 1 and RoHS
Switch to switch inte race
Router / server interface
+ 3.3V single power supply
Operating temperature: 0 to + 70 ° C
product consists of two SFP modules

Bidirectional SFP module
Single Fiber LC
3KM
RX 1310nm
TX 1550nm

Bidirectional SFP module
Single Fiber LC
3KM
TX 1310nm
RX 1550nm

Wifi Uplink or Ethernet WAN connection
1 x LAN port
1 x RS232 / RS485 for Modbus RTU
1 x Digital input / 1 x Digital output
Roaming - field strength controlled
IEEE 802.11a/b/g/n/ac Wi-Fi
Supply voltage: 9 to 48 VDC
DIN rail
Operating temperature -20℃ to +60℃
Dimensions: 131 x 108 x 31 mm

Chipset: Intel®I350AM4
PCI Express * 2.1 (5GT / s), operable in x4 slots or greater to 4 x RJ45, Cat 5e or more
10/100/1000 Mbps
VLAN filtering, PXE remote boot, IPMI pass-through
Os Support: Win 7 / Win 8 / Win 8.1 / Win 10 32/64Bit, Spain DOS, Linux, FreeBSD, Novell UnixWare / OpenUnix 8
Operating temperature: 0 ~ 55 ℃

Intel 82576EB
PCI Express v2.0 (2.5GT / s), X 4, or x8 operable in x16 slots
RJ45 (copper)
10/100/1000 Mbps
IMPI pass-through , PXE remote boot, VLAN filtering
OS support: Win 7 / Win 8 / Win 8.1 / Win 10 3264Bit
3.6W
Operating Temperature: 0 ~ 55 ℃

Cipset: WCH384L
maximum rate: 1.5 Mbps to 4 x RS-232 serial expansion
FIFO: 256-bytes (for each port)
data rate: 115kbps (for each port)
OS support: Windows 98SE / ME / NT 4. 0 / Server 2000
XP / Vista / Server 2003 / Win 7 / Win 8 / Win 10, DOS, Linux

4 Port SATA PCIE Cards for each port up to 500MB / S to 4 individual ports (no raid)
Processor. Marvell 88SE9215
SATA up to 6.0 GB / S
Non-Raid

Compliant with Serial ATA 3.0
Marvel 88SE9230 processor to 4 x internal SATA connector
communication speed: 6/3 / 1.5 Gbit
Raid 0, 1, 10, Hyper duo
OS support : windoes XP / vista / server03 / server08 / win7 / 8/10 / dos / linux
Mirror data from SSD mechanical hard drives for databeskyttelske

Intel X550 chipset
PCIe v3.0 (8.0GT/S)
Automatically negotiation between 1GbE, 2.5GbE, 5GbE and 10GbE
2 x RJ45 ports
Standard Cat 6 network cables
RJ-45 Category-6 up to 55mm, Category-6A up to 100m
Support Windows 64 bit (7, 2008 R2, 8, 2012, 8.1, 2012 R2, 10, 2016
Linux(RHEL6.x/7.x, SUSE11.x/12.x, Ubuntu*14.x/16.X) FreeBSD

2 Ports SFP PCI Express
10 gigabit ethernet
Interface: SFP fiber optic
Chipset: Intel 82599ES
OS Support: Win 7/8 / 8.1 / 10 / DOS / Linux
Power consumption: 5.5W
Certificates: FCC, CE, RoHS
Operating temperature: 0-55 degrees

Fiber network adapter from USB3.0
1 x 1000Mbit SFP slot
Chipset: Realtek RTL8153
USB 3.0
OS/Windows Client: Linux, MAC OS10.6~10.13, Windows XP / Vista / Win 7 / Win 8 / Win 8.1 / Win10 32bit or 64 bit

Up to 1.25Gb / s bi-directional
1/25 Gigabit of cat 5 cable
hot-pluggable SFP with RJ45 she
TX Disable and RX Los / without Los function
Fully metallic enclosure for low EMI
Low power dissipation (1.05 W typical)
Compact RJ-45 connector assembly
Access to physical layer IC via 2-wire serial bus
1000 BASE-T operation in host systems with SERDES interface
Operating Temperature: 0 ° C to + 70 ° C

Built 100-240V AC power supply
POC - Power Over Cable power
Meets NOT PoE specifications.
Constant voltage out.
2 x RJ45 ports - data input and data + voltage output
output voltage: DC 12VDC 1A
DC output: + (4.5) - (7.8)
Data: 1,2,3,6
Dimensions: 82 x 44 x 55 mm (LxWxH )
Weight: 104g

Built 100-240V AC power supply
POC - Power Over Cable power
Meets NOT PoE specifications.
Constant voltage out.
2 x RJ45 ports - data input and data + voltage output
output voltage: DC 24V 1A
DC output: + (4.5) - (7.8)
Data: 1,2,3,6
Dimensions: 82 x 44 x 55 mm (LxWxH )
Weight: 104g

Built 100-240V AC power supply
POC - Power Over Cable power
Meets NOT PoE specifications.
Constant voltage out.
2 x RJ45 ports - data input and data + voltage output
output voltage: DC 48V 0.5A
DC output: + (4.5) - (7.8)
Data: 1,2,3,6
Dimensions: 82 x 44 x 55 mm ( LxWxH)
Weight: 104g

Back piece for RJ45-PANEL front
Material: Plastic
Screw holes distance: 60mm
Color: White
Outer depth: 45mm
Inner depth: 43mm
Weight: 65g

1 x 10/100 / 1000BASE-T RJ45 IEEE 802.3bt PoE ++ output
2 x SFP slot 1000BASE-X and 100BASE-FX TC-dual mode
PoE Power up to 95 watts to PoE port
Provides 54VDC of the RJ45 Ethernet cable for devices with Ethernet PoE port
Automatic detection of IEEE 802.3bt-equipment United Protects devices from being damaged by incorrect installation
Remove Power supply up to 100 meters
IEEE 802.3af / at / bt splitter devices compatible
Layer 2 features
DIP switch: Selecting the standard / Legacy mode
IP30 metal housing
DIN rail and wall mounting
12 - 56V DC redundant power with reverse polarity protection
power supply not included
Operating Temperature -40 to 75 ° C,

Single Mode SFP module Duplex.
IEEE 802.3z 1000BASE-LX mini-GBIC.
Fiber Contact: LC / UPC.
Up to 80 km.
Wavelength 1550nm.
Operating temperature : -40 ~ + 75 ° C.

Managed switch with Gigabit ports
8 x 10/100 / 1000BASE-T RJ45 ports with PoE +
Up to 36 watts for each PoE port
Total PoE power is 240Watt
2 x 100 / 1000BASE-X mini-GBIC / SFP
IGMP Snooping (Multicast)
Operating temperature: -20°C to 70°C
Can be wall mounted, magnetic wall mounted or DIN rail mounted
Supply voltage: 48-58DCV 5.7A max input (PSU not included)
Dimensions: 180 x 140 x 24.4mm
Weight: 686 grams

WiFi 802.11a / b / g / n / ac
Dual Band 2.4GHz / 5GHz
2 X USB3.0
4 X LAN 1Gbit/s
1 X WAN 1Gbit/s
4 X External antennas 5dBi (removable)
supply voltage 12V 3A 31W

Industrial robust design and compact metal housing
​High data speed CAT12
ModBus TCP
802.11b/g/n Wi-Fi support, 150Mbps data rate
5xLAN or 4xLAN, 1xWAN
WAN port support PPPoE, static IP, DHCP client
Ultra security, VPN: PPTP, L2TP, GRE, IPSec, and OpenVPN
Power input 7.5 - 32VDC
Dimensions: 176mm x 105mm x 25mm (not including antenna)
Operation temperature: -30 to +70C degree
CE,FCC,RoHS,CCC
4G LTE speed max 300Mbit/s download/upload
4G LTE speed tested max 100Mbit/s download 80Mbit/s upload in DANBIT Køge

Multi-function media converter - has it all!!
Connect 2 fiber networks with different speeds, e.g. 100Mbit with 1000Mbit
Connect 2 fiber networks which are Multi Mode and Single Mode
Media converter with 2 x fiber ports - redundant mode
Media converter with 2 x fiber ports - switch mode
Fiber into port 1 and Fiber on from Port 2 with 1 x RJ45
SFP slot for 100Mbit, 1Gbit, 2.5Gbit SFP transceivers
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Additional SFP modules.
12 - 48VDC redundant and 24VAC
Power consumption: 4.8 Watt
Power supply not included
Dimensions: 135 x 87 x 32 mm
Weight: 505g
IP30
Operating temperature -40 to +75°C
DIN rail and wall mounting

100 / 1000Mbit Media Converter with extended temperature
1 x RJ45 10/100 / 1000BASE-T
1 x SFP slot 100 / 1000Mbit
SFP module is as standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase 100Mbit / Gigabit SFP modules.
Supply voltage: 9 - 48VDC redundant power
Can also be connected to 24VAC
consumption: 2Watt
Power not supplied
Dimensions: 104 x 70 x 30 mm
IP30 metal housing
DIN rail and wall mounting
Weight: 251G
operating temperature -40 to +75°C

SFP Dust Cap - blanking
Used in unused SFP IO
protection against impurities
Flexible
Sold individually

Managed PoE Switch with 8 RJ45 and 4 SFP slot
8 x 10/100 / 1000Mbit with PoE ++ (95Watt)
PoE power budget is 360Watt (45Watt per port)
PoE utvidga mode - max. 160 - 200meter
2 x 100 / 1000Mbit SFP slot - for Single- and Multimode SFP module
2 x 10Gbit SFP slot
2 x Digital input
2 x Digital outputs (Open Collector)
IGMP Snooping Seite 128 VLAN interfaces
IEEE 1588v2 Precision Time Protocol (time  syncronising)
Operating temperature: -40 - + 75 ° C
Dimensions: 152 x 108 x 77 mm
Weight: 1, 2kg
Supply voltage: 48 - 56VDC (recommended min. 52VDC) 8amp

Connect switches without PoE for PoE PSE to Equipment
IEEE 802.3bt back compatible to IEEE 802.3at
Supports 10/100 / 1000Mbit speeds
4 x LAN input from the switch without PoE
4 x LAN with up to 95 Watt PoE
Max. PoE power total is 240Watt (PoE power budget)
Auto-detect devices with PoE input for not destroying not PoE
Supply voltage: 48 - 54VDC max. 244 Watt
Setting with DIP switches
DIN bracket for wall mounting and
Operating temperature: -40 - +75°C
Dimensions: 135 x 88 x 50 mm
Weight: 537g

2 x 10/100 / 1000BASE-T RJ45 IEEE 802.3bt PoE ++ output
2 x SFP slot 1000BASE-X and 100BASE-FX TC-dual mode
SFP module is as standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase 100Mbit / Gigabit SFP modules.
PoE++ power up to 95 watts of PoE
Provides 54VDC of the RJ45 Ethernet cable for devices with Ethernet PoE port
Automatic detection of IEEE 802.3bt equipment - does not protect PoE equipment at damage
IEEE 802.3af / at / bt splitter devices compatible
DIP switch: Selecting the standard / Legacy mode
DIN rail and wall mounting
12 - 56V DC redundant power with reverse polarity protection Power supply
purchased
Dimensions: 153 x 85 x 55 mm
Operating temperature -40 to +75°C

2-kanals duplex eller 4-kanals simplex fiber optisk bypass omskifter
Fiberhastigheder 100 Gbps/40 Gbps/10 Gbps/1 Gbps/100 Mbps
Single Mode med LC-stik
Optisk Bypass fall back omskifter
Swiche-tid <8ms
1dB Insertion loss (gennemgangstab)
Meget stor pålidelighed på kritiske netværkslink
IP30 tæt metalhus
Forsyningsspænding 9 ~ 48VDC eller 24VAC, 0,6Watt
DIN-skinne og vægmontering
Relæudgang for advarsel om strømafbrydelse
Driftstemperatur: -40 til +75°C
Industri-grade design
Mål: 135 x 87 x 32 mm

2-kanals duplex eller 4-kanals simplex fiber optisk bypass omskifter
Fiberhastigheder 100 Gbps/40 Gbps/10 Gbps/1 Gbps/100 Mbps
Multi Mode med LC-stik
Optisk Bypass fall back omskifter
Swiche-tid <8ms
1dB Insertion loss (gennemgangstab)
Meget stor pålidelighed på kritiske netværkslink
IP30 tæt metalhus
Forsyningsspænding 9 ~ 48VDC eller 24VAC, 0,6Watt
DIN-skinne og vægmontering
Relæudgang for advarsel om strømafbrydelse
Driftstemperatur: -40 til +75°C
Industri-grade design
Mål: 135 x 87 x 32 mm

2-channel duplex or 4-channel simplex fiber optic bypass switch
Fiber speeds 100 Gbps/40 Gbps/10 Gbps/1 Gbps/100 Mbps
Single Mode with SC connector
Optical Bypass fall back switch
Switch time under 8ms
1dB Insertion loss (through loss)
Very high reliability on critical network links
IP30 sealed metal housing
Supply voltage 9 ~ 48VDC or 24VAC, 0.6Watt
DIN rail and wall mounting
Relay output for power failure warning
Operating temperature: -40 to +75°C
Industrial-grade design
Dimensions: 135 x 87 x 32 mm