Network products

Bluetooth from PC to the adapter provides RS232 port
External antenna.
Bluetooth 2.0.
With 2 pcs. as back-to-back link
provides connection between 2 COM ports
Wireless transfer of data between serial ports
Up to 100 meters
Antenna connector is RSMA female
Setup via AT commands
Must be powered from 5 - 40VDC via screw terminal
USB mini cable to A male - for power from 5VDC
2 x screw terminal for any external power supply
Is not battery-powered
Use Putty for testing/setup
Help with setup can be purchased additionally

8 port 10/100/1000Mbit unmanaged switch in mini format.
Powered from PoE or 5VDC (PSU not included).
Additional purchases, if any DC5V/2A-RQ power supply.
Does NOT have PoE out.
Dimensions: 155 x 86 x 26 mm
Weight: 378g

Rest storage

2 Ports Repeater to 10 Base2 and 10 Base5 Network
BNC / Aui Ethernet
can convert between Aui and BNC networks.

100 Mbit PCI fibernetkort med SC-stik

1000 Mbps PCI-Express Net Card for SFP
Buy 1000Mbit SFP Module Single Mode or Multi Mode
Driver For: XP / 2003, Vista / 2008, Win 7, Linux 64-bit, Mac OS X
PCI Express, 1 Lane
SFP module can be 62.5/125my or 50/125my
Operating temperature: 0 - +65°C
Dim: 121.4 x 119.5 mm

10/100 / 1000Mbit PoE Network Extender
Extend the network cable with PoE over the magic 100 meters
4 pieces. Extenders provide a maximum distance of 500 meters
Extenders are powered from PoE and pass PoE on to the next Extender
Dimensions: 94 x 70 x 26 mm

PoE In: Max 30.8 Watts

PoE Out: Max 26 Watts
Weight: 189g

Switches without PoE can with this Injector "upgraded" to PoE switch
24 ports PoE full power supply

Per port DC 52V 30.8/15.4 watts
LAN without PoE in, LAN with PoE out
10 / 100 / 1000Mbit network

Max PoE 440 Watts

Passive PoE Injector with 12 / 19 / 24 VDC 0.7A output
From Active to Passive PoE converter
PoE input port: IEEE 802.3af/at RJ-45 STP / PD. Supplied from an active PoE switch
Passive PoE output port: non-802.3af/at RJ-45 STP / PSE. For equipment that is NOT for active PoE.

AUI converter for UTP cable, external supply
1 x DB15 AUI female 10 Base-5 (AUI)
1 x RJ45 female 10 Base-T
Max cable length: 500m max per (Thick Ethernet), 100m max per UTP cable
LED: POWER, COL, LINK, TP / RCV
IEEE 802.3 10Base-T / AUI Ethernet
IEEE 802.2 10Base-T/10Base-2
FCC Class A Subpart B or Part15 Requirement

Ethernet over phone cable 1 x twisted pair
Up to 100Mbps at 300meter
Up to 1km - automatic speed adjustment
Break the 100 meter limit with VDSL connection
Transparent data connection to 8-port VDSL2 switch with 2 shared RJ45 / SFP ports
Use 2 VDSL devices to a bridge / connection

Rest storage

Vdsl2 router with 4 x RJ45 and WiFi
Network connection up to 1.4 km above 2-wire telephone cables
point to point federal
2 pcs. Eth-VDSL2ROUTER for a connection

Beslag til montage af WiFi antenner

Industrielt 2,4/5GHz trådløst Access Point
1200Mbps 802.11ac
Dual Band
LAN Gigabit Ethernet 
1 x 10/100/1000BASE-TX RJ45 port med PoE
2 x 2.4GHz 5dBi SMA antenne, 2 x 5GHz 5dBi SMA antenne med RP-SMA-stik 
802.3at PoE, 48-56V DC input
IP30 tæt kabinet
Driftstemperatur -10 til +60°
Til vægmontering

Wifi Access Point, Bridge, Client. DIN mount
2,4GHz or 5GHz, 300Mbit
MIMO antenna, 2 x RSMA female
9 - 48VDC, 6Watt
Temperature: -10 - +60°C 
Size: 47 x 110 x 90mm

2.4GHz indoor omnidirectional antenna 0 dBi
Antenna for short-range applications
RSMA male connector for AP - (circumferential + hole)
Robust, suitable for industrial machine

Udendørs 2,4GHz rundstråleantenne 15 dBi
Vertikal spredning er 6 grader
Horisontal spredning er 360 grader
N hun stik
Højde 1,6meter
Mastebeslag medfølger

Indoor 2,4GHz Whip antenna 5 DBI
Removable Rubber antenna
RSMA Han connector
Height 25cm
Cable length: 1.5m

Indoor 2,4GHz Whip antenna 5 DBI
Rubber antenna with Flex-joint
RSMA male connector
Height 20cm

Outdoor Dual Band 5.8 / 2,4GHz Renary Antense
Passive gaint: 6 DBI
Vertical Proliferation is 25 degrees
Horizontal Spread is 360 degrees
n She connector
Length is 54cm
Maste fittings included - with flance

Outdoor directional parabola antenna 19dBi
Vertical spread is 7 degrees
Horizontal spread is 8 degrees
Mast bracket - adjustable - included
N she stick
1070 x 610mm

Outdoor / indoor 2.4GHz omnidirectional antenna 7 dBi
Vertical spread is 18 degrees
Horizontal spread is 360 degrees
With RSMA he plugs into the bottom of the antenna
Height 24cm
Mast mounting with strips

Udendørs retningsbestemt YAGI-antenne 7 dBi
Vertikal spredning er 40 grader
Horisontal spredning er 45 grader
Mastebeslag medfølger
N hun stik
300 x 100mm

ZigBee modul med 14 indgange

ZigBee module with 6 inputs and 4 relay outputs

ZigBee modul med 8 indgange

Master, med Ethernet port og 1Kb buffer

Slavemodul med Ethernet til ZIG-MST-E-I

ISM 2.4 GHz Operating Frequency
Fully Compliant with 2.4 G (IEEE802.15.4/ ZigBee Specifications)
Fully Compliant with ZigBee Pro (ZigBee 2007)
Wireless Transmission Range up to 700 m (Default)
Adjustable RF Transmission Output Power
Supports AES-128 Encryption for the Wireless Communication
GUI Configuration Software (Windows Version)
RS-232/RS-485 Interface Supported
Source Identification for the non-address Device Data Transmission
Supports Broadcast Transmission for the Redundancy Transmission Path
Supports Unicast Transmission to Reduce Network Loading
Supports Topology Utility for Network Monitoring and Improvement
DIN-Rail Mountable

Unmanaged 5 ports industriswitch
4 x RJ45 10/100Mbit
1 x ST fiber 100Mbit Multi Mode
IP50

8 port 10/100/1000Mbit unmanaged switch in mini format.
Metal chassis.
100 - 240VAC. 9.6 Watts.
AC plug on the back.
VLAN Isolation
Temp: -10 - +70°C
Dimensions: 168 x 93 x 32 mm

For the interconnection of single mode and multimode fiber networks
1000Base-SX to 1000Base-LX, SM, 850/1310 nm
only to Gigabit fiber networks.

Use 2 pcs. Eth-VDSL2 + for an Ethernet connection (Bridge)

up to 1.4 km Ethernet connection with 2 pcs. VDSL devices
Poe over 2-wire connection
1 x LAN 10/100 / 1000Base-T RJ45 Auto-MDI / MDI-X Port
1 x VDSL2 RJ11 She
Splitter for analogously Telephone connection included
Power supply: 54V / 0.74A included
POE + (30W) for eg. Access Point, IP camera.
Prepared for your mounting, wall mounting
Your fittings are purchased

Use VDSL connection over 2-thread cable where WiFi is an unstable connection

up to 1.4 km above eg. Conducted phone cable with 2 pcs. VDSL modules
Use 2 pcs. ETH-VDSL2+4+ or ETH-VDSL2+A and ETH-VDSL2+4+
Ethernet over 2-wire connection with VDSL
Ideal solution When the network distance is over 100 meters of border
ideal solution when a WiFi Link is an unstable connection
providing a transparent data connection
supply: 5VDC, 2A power supply included
DIP switch: VDSL connection must be set to CPE and the other for CO.
Prepared for your Montage, wall assembly. Your fittings are purchased
Order 2 pcs for a set.

External COM ports via Ethernet and Internet

Serial device server to RS232/422/485 with WIFI

Your rail bracket 2 pcs.

WiFi Booster 500mW, 11/54 for indoor use

2-way WiFi amplifier. NOTE: max. Radiated power may be 100 mW

Ethernet Adapter for USB2.0
RJ45 female and USB micro B
Supplied via USB port
OS support WIN2000, XP, VISTA, 7, 8, 10
White
20cm cable

Media converter for 100Mbit Multi Mode Fiber SC
RJ45 10/100Mbit
Fiber 100Mbit 62.5/125my and 50/125my
-40 to +75°C
12 - 48 VDC Redundant PSU input

2 Way Power Splitter / Combiner
Kan splitte radiosignalet til 2 antenner
Ofte anvendt til Panel-antenner
1 dB insertion loss

Ethernet Adapter for USB3.1C
RJ45 female and USB 3.1C male Supports USB 3.0, 2.0, and 1.1 
Full duplex 10/100 / 1000Mbit
Supplied via USB port
OS support WIN2000, XP, VISTA, 7, 8 , 10
10 cm cable

8-ports managed switch

Unmanaged 10/100Mbps switch

Strømforsyning af Access Point eller webkamera via Ethernetkablet.

External COM ports via Ethernet and Internet
3-in-1 Serial Port: RS-232, RS-422, OR RS-485
Modes: TCP Server, TCP Client, UDP
Ethernet Modem
Pair Connection
Real Com / Tty Drivers for Windows and Linux
2-wire RS-485 with Patented Automatic Data Direction Control (Addc®)
Built-in 15 kV ESD Protection for All Serial Signal

Good for mounting directly on the AP
Omnidirectional antenna with N male for outdoor Access Point - dual band
Gain: 4.5 dBi at 2.4 GHz and 7 dBi at 5 GHz
Vertical: 2.4GHz 80°, 5GHz 55°
Horizontal: 360°
Hard ABS plastic - white
50 ohms
N type male Brass
Temperature -20 - +65℃
Dimensions: ø 23 x L 180 mm
Weight: 65g

95W input
2 x 33W output
2 x RJ45 Gigabit ethernet (10/100/1000)
10K Jumb frames
1M Packet Buffer
8K MAC address table
Surge protection
Metal cabinet & nbsp; with IP67 density
9% - 95% humidity
-40°C ~ 75°C working temperature
With wall mount

Udendørs 2,4/5 GHz trådløs Access Point / Bridge / Router
2000Mbps ved brug af Dual Stack
IPv4 / IPv6 dual-stack management
Mulighed for flere SSID
Firewall og DoS Preventing & Packet Filtering
QoS Control
1 x RJ45
Mulighed for simkort
Inklusiv 2 x 2,4GHz antenner
Inklusiv 4 x 5GHz antenner
Høj driftstemperatur -40 ~ 60 grader celsius
Op til 16 SSIDs på hvert frekvensbånd
128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK(TKIP/AES) security, & 802.1x authentication
Inklusiv strømforsyning og mulighed for PoE
Nem at opsætte

24 x 10/100 / 1000Tx IEEE 802.3 Off / On, PoE + Gigabit Ports (30W / Port) + 4 x Gigabit Copper / SFP Combi Ports
4 x 10/100 / 1000Tx RJ45 + 4 x 100/1000 SFP Slots
Management: SNMP v1 / v2c / v3, WEB, Telnet, Standard MIB
Security: 802.1x (Port Based, MD5 / TLS / TTLS / PEAP Encryption), HTTPS, SSH and SNMPv3
Redundant : Proprietary Ring (Ultra-High-Speed ​​Recovery Time <20 ms), RSTP / STP (802.1w / 1D), MSTP
48VDC Power Input (46-57 VDC for PoE off, 53-57 VDC recommended for PoE at) 2 Relay Outputs
Temperature: -40 ° - 75 ° C - Polarity Protection
Overload Protector
1U Rack Mount Design
IP30 Close

16 x 10/100Mbps RJ45
2 x 10/100/1000Mbit RJ45 (combi)
2 x 100/1000Mbps SFP slot (combi)
7.2 Gbps Back-Plane (Switching Fabric)
Ethernet Ring Redundancy (Recovery Time <20ms)
IEEE 802.1w Rapid Spanning Tree & IEEE 802.1d Spanning Tree Protocol
IEEE 802.1x RADIUS
IEEE 802.1p Class or Service for Traffic Classification & Prioritization
QoS (Quality of Service)
Port Based VLAN & IEEE 802.1Q Tag VLAN
IGMP med Query Mode for Multi-Media applikationer
Port Mirroring for Traffic Monitoring
IP Address Security Management
IP30 robust aluminum kabinet
DIN-Rail eller vægmontering

1000 meter - network extender over coax cable.
Poe transferred in cable
1 x 10 / 100mbit base-TX RJ45
Auto-Negotiation / Auto-MDI / MDI-X
Poe Standard: IEEE 802.3AT / BY
PoE Output: 48-56VDC Max. 25 Watt
PoE Mode: End-Span, RJ45 Pin 1/2 (+), 3/6 (-)
1 x BNC Hun - RG59 Coax
Max. Distance: 200m w / Poe +, 1000m w / Poe, 1600m without Poe
Power supplied from 48-56VDC min. 2amp

MPCIE WLAN modul
fra 2.412 til 2.462 GHz
802.11b/g
Power output 177 mW

Wifi antenna, dual band
2.4/5GHz
For mounting on a car window or window
3 meter cable
RP-SMA Male

Embedded high power injector max. 60W for each PoE port
IEEE 802.3at/af PoE compliant
Power Protection: OVP, OCP, SCP
Compact design with wall mounted capability
UL/CB -certified external power adaptor of 120w
Per port PoE(Mode A, Mode B) On-Off Control by DIP Switch

Extended Operating Temperature -40° ~ 80°C
16-Port 10/100TX + 2-Port 10/100/1000T/mini-GBIC Combo
7.2 Gbps Back-Plane (Switching Fabric)
Ethernet Ring Redundancy (Recovery Time <20ms)
IEEE 802.1w Rapid Spanning Tree & IEEE 802.1d Spanning Tree Protocol
IEEE 802.1x RADIUS
IEEE 802.1p Class or Service for Traffic Classification & Prioritization
QoS (Quality of Service)
Supports Port Based VLAN & IEEE 802.1Q Tag VLAN
IGMP with Query Mode for Multi-Media Applications
Port Mirroring for Traffic Monitoring
IP Address Security Management to Prevent Unauthorized Access
UL Class I, Division 2 Certified
IP30 Rugged Aluminum Case Design
DIN-Rail or Panel Mountable

10Gbit fiber the RJ45 Media converter
For Single Mode or Multi Mode SFP module
Extended temperature range
1 x RJ45 10G/5G/2.5G/1G/100M BASE-T
1 x 10GBASE-SR/LR SFP slot
The SFP module is standard with an LC connector
Additional SFP module
Supply voltage: 12 - 48VDC
PSU not included
Operating temperature -40 to +75°C
YOUR bracket

2 pieces. VDSL2 + A can be established network connection over the 2-wire cable

Up to 1.4 Km Ethernet bridge via the 2 pieces. VDSL2 + A
speed depends on cable and length - up to 90Mbps
Automatically adapts speed to highest speed
can also communicate with ETH-VDSL2 + 4 + (4 port switch)
1 x LAN 10/100 BASE-T RJ45 auto-MDI / MDI-X port
1 x VDSL2 + A RJ11 she
supply: 5VDC, 2A power supply included
By 2 pcs. ETH-VDSL2 + A one shall be put to the CPE and the other to CO.
Connect each end of the 2-wire twisted pair cable.
ESD protection: 6KV DC Kirke DIN mounting, wall mounting. Your hardware purchased
SOLD SEPARATELY! Order 2 pieces for one set.

Supporter 6-Port 10 / 100Tx and 2 x Gigabit Combo Ports
2 x 10/100 / 1000Tx RJ45
2 x 100/1000 SFP Slots
Supporter Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
8K MAC Address Table
Surge Protection: 2,000 VDC Support
ESD Protection: 6,000 VDC Support
UL Class I, Division 2 Certified
Redundant Power Input Design: 12 ~ 48VDC
Built-in 1 x Relay Output for Power Failure Warning
IP30 Rugged Metal
Wall and DIN Rail Mounting
Operating Temperature EOT: -40 ° to 75 ° C

Break 100 meter border with VDSL over RG59 Coax cable
1 x RJ45 10/100 / 1000Mbit
Up to 300mbit / s - duplex (automatic speed optimization)
Unroubing Data connection
Temperature: 0-50 ° C
5VDC 2A Power supply included
75Ω cable must be used
Use 2 pcs. Eth-VDSL-RG + G to a connection

Bidirectional SFP module
Single Fiber LC
3KM
RX 1310nm
TX 1550nm

16 x RJ45 10/100/1000Mbit with PoE+
2 x 10/100/1000Mbit RJ45
2 x Gbit SFP slot
IP-Stacking up to 6 units
Gigabit TP, SFP and 10G SFP+ interfaces
Hardware stacking up to 6 units
Switch series stacked in a logical unit
Stacking architecture supports redundant Ring mode
IPv4 IGMP/ IPv6 MLD snooping v1, v2 and v3
IPv6 MLD snooping v1, v2
MVR (Multicast VLAN Registration)
Ethernet Ring Protection Switching
Supply voltage: 12 - 48VDC, 24VAC Redundant
Dimensions: 152 x 107 x 66 mm
Weight: 829g
Operating temperature: -40 - +75°C
DIN bracket

CAN Bus to USB Tester
Interface: Open 6
2 x CAN Channels
CAN Standard: ISO 11898, Can 2.0a, Can2.0b
CAN Baudrate: 5K - 1Mbps and most widely used Baud Rate
Isolation: 1500V
USB: 1.1, 2.0
Support Software: _CAN Tools, CAN Test, CAN Pro.
Operating System: Windows 2000 / XP / 2003/7/8/10
Supports VC, VB, C #, LabVIEW, LabWindows, Delphi7 OA
Operating temperature: -40 - + 85 ℃
Measure: 103 x 64 x 23 mm

4G LTE gateway to old analog telephone
also for Dect Wireless phone with analogue Base
1 x SIM card slot (full size)
2 x RJ11 Connector for 2 phone appliances
Power supply: DC 5V -12V 0.5W (power supply included)
Operating temperature: -10 ~ + 40 ℃
Dimensions: 120 x 85 x 28 mm
exclusive mobile subscription and SIM card

2.5Gbit SFP optical transceiver Single Mode
Mini GBIC - Small Factor
LC Single Mode fiber cables (9 my)
Estimated range is 20 km
Wavelength: 1310 nm

Surge Protection to Gigabit network
Max. Working voltage on line: 48V
2KV Impulse protection (10/700 Micro sec)
Loss Factor: 0.2dB
Dim: 112 x 38 x 30 mm

Unmanaged Switch
4 x RJ45 PoE++ port 10/100/1000Mbit
2 x 100/1000X SFP-port
Samlet PoE effektbudget: 250W
4x60W PoE ELLER 2x90W PoE+2x30W
PoE standart: IEEE 802.3bt
IP67, IK10
Driftstemperatur: -40°C ~ 65°C
Option: PoH 100W / Managed

Antenna adapter
exterior thread + hole (N type)
exterior thread + pin (RP-TNC)
Impedance: 50 ohm

4x 30W 56VDC IEEE802.3at PoE port
1x 56/24VDC PoE port
1x SFP Port
2x 48-56VDC Indgang
Driftstemperatur -40°C - 75°C
10/100/1000Mbps Data Rates
Total Power Budget 120W

1x SIM 4G LTE
1x RJ45 PoE-PSE 802.3at
50-57VDC power input
Cellular & Config, NAT / Bridge Mode
OpenVPN, Packet Filter, MAC Filter, IPS
-30°C ~ 70°C operating tempeture
Optional: DIN-Rail, Wall-Mount, Power Adapter

Mini GBIC / SFP optical transceiver
LC fiber cables
1310 nm
up to 2 km multimode

MiniGBIC / SFP+
10 Gigabit
LC
850 nm
Up to 300 m multimode

MiniGBIC / SFP+
LC
1310 nm
up to 10 km, single-mode

REMAINDER SALE

MiniGBIC / SFP optical transceiver
LC
1310 nm
Up to 50 km single mode

Managed Gigabit switch. 8 x RJ45, 2 x SFP
8 x 10/100/1000Mbit with RJ45 connectors
2 x 100/1000Mbit to SFP
Supply voltage: 12 - 48VDC redundant
Also accepts 24VAC
Power consumption : max. 10W
DIN rail bracket
1 relay for alerting
Dimensions: 135 x 88 x 56 mm
Operating temperature: -40 - +75°C

Managed switch. 8 x SFP, 2 x RJ45 ports
8 x fiber ports - 100/1000Base-SX / LX mini-GBIC SFP slots
2 x copper ports - 10/100/1000Mbit RJ45
IP30 enclosure
DIN rail and wall mounting
24:02 48V DC, redundant power
Can accept 24VAC
-40 to +75°C operating temperature
Dimensions: 152 x 107 x 72 mm

Unmanaged 5 Ports IndustriSwitch
4 x RJ45 10 / 100mbit
1 x SC Fiber 100Mbit Single Mode
IP30