Network products / Wifi / PoE / RJ45-Fiber

4G LTE gateway to old analog telephone
also for Dect Wireless phone with analogue Base
1 x SIM card slot (full size)
2 x RJ11 Connector for 2 phone appliances
Power supply: DC 5V -12V 0.5W (power supply included)
Operating temperature: -10 ~ + 40 ℃
Dimensions: 120 x 85 x 28 mm
exclusive mobile subscription and SIM card

100 Mbit PCI-Express fibernetkort med SC-stik

LoRaWan transceiver with digital inputs
LoRaWan transceiver with relay output (SPDT)
Supporter LoRa Class C Protocol
Serial Port: RS232 or RS485 (Transparent data)
Collects data to be transmitted to LoRa-Gateway Controller
Frequency: 868MHz - Range Up to 10 km
1 x Antenna 2dBi - SMA male connector
Configuration Port: Micro USB
Operating temperature: -40 - +70°C
Supply voltage: 5 - 24VDC
Dim: 79 x 60 x 24 mm

WiFi 802.11a / b / g / n / ac
Dual Band 2.4GHz / 5GHz
2 X USB3.0
4 X LAN 1Gbit/s
1 X WAN 1Gbit/s
4 X External antennas 5dBi (removable)
supply voltage 12V 3A 31W

Master, med Ethernet port og 1Kb buffer

Cisco MGBSX1 Gigabit SX
ini-GBIC SFP Transceiver

Top class media converter with 2 fiber ports and 2 RJ45 ports
for redundant network or as Node in networks
suitable where Single Mode must be connected to Multi Mode
full managed with many features
RJ45 10/100/1000Mbit
Modbus TCP - Real Time Monitoring
IEEE1588V2 - Precision Time Protocol - Transparent Time
IEEE 802.1 Spanking Tree Protocol
Port Mirroring - more to one
Loop Protection - Avoid Broadcast Loop
Supports IGMP Snooping
IP Source Guard - Protects against Spoofing
SMTP, Sylog, Trap
with LFP and LLCF - Link Forward Carry Through.
Supply voltage: 9 - 48VDC, 24VAC
Operating temperature: -40 - + 75 ° C
DIN bracket
SFP modules and power supply are to be purchased

10/100/1000Base-TX til 1000Base-LX, 1550 nm, Single Mode, 50 km
Kun til 1000Mbit fiber, Single Mode

Industrielt 2,4/5GHz trådløst Access Point
1200Mbps 802.11ac
Dual Band
LAN Gigabit Ethernet 
1 x 10/100/1000BASE-TX RJ45 port med PoE
2 x 2.4GHz 5dBi SMA antenne, 2 x 5GHz 5dBi SMA antenne med RP-SMA-stik 
802.3at PoE, 48-56V DC input
IP30 tæt kabinet
Driftstemperatur -10 til +60°
Til vægmontering

WiFi booster 1W, 11/54 for outdoor use

2-way Wifi amplifier. NOTE: maximum radiated power must be 100 mW

NOTE: Cable not included

DNV GL Certified marine network switch
Non-managed 5 port network switch approved to vessels
5 x 10 / 100Mbit Auto-MDI / MDIX
Supply voltage: 18 - 30VDC polarity
Surge, surge protector DC input
Throughput: 148,880 pps at 100Mbit
Dimensions: 110 x 74 x 24 mm
Weight: 145g
Operating temperature: -40 - + 75 ° C
Moisture: 10-90% RH ( no condensation)
DIN fittings, metal enclosure

Radio link for serial transfer on the 2.4GHz band
one for a (P2P) or one for more (P2M)
Range Up to 700 meters with whip-antenna
Range Improves panel antenna < Br> Serial port: RS232 or RS485
supply and COM port is with shed terminals
antenna: R/SMA female
Simple Setup with Turn and Dip Switche
2.4GHz, 16 channels
Supply 10 to 30 VDC

PoE++ power supply via Ethernet cable, up to 95 Watt
LAN without PoE in, gives LAN with PoE out
PoE++ 54VDC/95W
Mid-span and End-span give 95 Watts
For 100/1000/2500/5000Mbit networks.
PoE power output DC 24V~54V input: Max. 89.5W@1m cable, Max. 75W@100m cable
PoE power output DC 12V input: Max. 60W@1m cable, Max. 52W@100m cable
Temperature range: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
DIN installation
Powersupply input from 12 - 54VDC

1800 Mbit/s Access Point, Gateway, Repeater, WPA3, Dual Band, Wall / Ceiling Mounting
Support 802.1Q VLAN and SSID for VLAN Mapping
Ofdma (Orthogonal Frequency Division Multiple Access)
Support WiFi Multimedia (WMM), IGMP
Seamless Roaming
2.4GHz (600Mbps) and 5GHz (1200Mbps)
High transmission power, adjustable
4 built-in 5 dBi antennas
8 x SSID, up to 250 Clients
1 x RJ45 with PoE + input
1 x RJ45 LAN
supply voltage at non-PoE: 12VDC / 2A (5.5 / 2.1mm)
Dim: 186 x 186 x 36 mm
Operating temperature : 0 - +55°C

Slavemodul med Ethernet til ZIG-MST-E-I

ISM 2.4 GHz Operating Frequency
Fully Compliant with 2.4 G (IEEE802.15.4/ ZigBee Specifications)
Fully Compliant with ZigBee Pro (ZigBee 2007)
Wireless Transmission Range up to 700 m (Default)
Adjustable RF Transmission Output Power
Supports AES-128 Encryption for the Wireless Communication
GUI Configuration Software (Windows Version)
RS-232/RS-485 Interface Supported
Source Identification for the non-address Device Data Transmission
Supports Broadcast Transmission for the Redundancy Transmission Path
Supports Unicast Transmission to Reduce Network Loading
Supports Topology Utility for Network Monitoring and Improvement
DIN-Rail Mountable

Use 2 pcs. Eth-VDSL2 + for an Ethernet connection (Bridge)

up to 1.4 km Ethernet connection with 2 pcs. VDSL devices
Poe over 2-wire connection
1 x LAN 10/100 / 1000Base-T RJ45 Auto-MDI / MDI-X Port
1 x VDSL2 RJ11 She
Splitter for analogously Telephone connection included
Power supply: 54V / 0.74A included
POE + (30W) for eg. Access Point, IP camera.
Prepared for your mounting, wall mounting
Your fittings are purchased

REMAINDER SALE

MiniGBIC / SFP optical transceiver
LC
1310 nm
Up to 50 km single mode

Connect Multimode fiber network with single mode fiber network
1 x 100Mbit Single Mode SC
1 x 100Mbit Multimode SC
Wavelength: 1310 / 1310nm
100Base-SX / LX fiber network
5VDC / 2A adapter included

Gigabit PoE and data Extender PoE splitter
1 x RJ45 Data + PoE ++ input
2 x RJ45 Data + PoE + outputs
Standard: IEEE 802.3bt and 802.3at
from injector to Extender up to 100 meters
from Extender to PD Devices Up to 100 meters
IP67 Aluminum Molded cabinet
Temperature range: -40 - + 75 ° C
Plug Play
Wall fittings
Size: 170 X 44 x 73 mm with cable gland

8-port Unmanaged 10 / 100M + 2-port Gigabit RJ45
2 x 1000BASE-X mini-GBIC SFP combo interface
PoE + is 32 Watt
Total PoE power is 120 watts
IEEE 802.3af / to End-span
Each port provides 52VDC to PoE equipment
Auto deteketere PoE equipment
Provides power to the max. 100meter
Extended mode without PoE, the distance up to 250meter
Equipped with smart LCD
Normal, VLAN, Extend
Supply voltage: 100 - 240VAC
Dimensions: 280 x 180 x 44 mm (1U)

Ethernet 10Base-T / FL Multi-Mode converter
850 nm
Only for 10Mbit fiber - older network systems
RJ45 to Fiber ST
Max. cable length: 2km
Power is supplied from 12VDC 1A

4x 30W 56VDC IEEE802.3at PoE port
1x 56/24VDC PoE port
1x SFP Port
2x 48-56VDC Indgang
Driftstemperatur -40°C - 75°C
10/100/1000Mbps Data Rates
Total Power Budget 120W

4 x RJ45 port with PoE ++ (Ultra PoE)
1 x RJ 45 Uplink port (not PoE).
60W for every PoE-Port
Power Budget is 120 watts
IEEE 802.3at / by PoE.
Dip on / off PoE 
Power supply: 100 - 240VAC 
Operating temperature: 0 - +40°C
Size: 119 x 88 x 27 mm
Weight: 1.3 kg

100 Mbit PCI fibernetkort med SC-stik

2.4GHz, 300Mbps AP, Gateway, Repeater, Bridge, WISP
802.11 b/g/n
Includes 2 pcs. 8dBi antennas
2 x N female
Transmission power: max. 500mW
1 x 10/100Mbps RJ45
For pipe mounting and wall mounting
WPA/WPA2, WPA-PSK
IP65
Power supply: PoC or PoE+ 48VDC (injector included)
Pin 4/5 +, 7/8 - PoE input.
Operating temperature: -20 - +70°C
Dimensions: 880 x 200 x 80mm
Weight 1.7kg

Insulator for up to 80mbit network speed
1 Port
1 x RJ45 female
1 pc ½meter cable with RJ45 male
12kv isolation voltage.
Unable to transfer PoE

10 Gbit PCI-Express netkort med SFP+

AUI converter to UTP cable
1 x DB15 male to 10 Base-5 (AUI)
1 x RJ45 jack for 10 Base-T
Max cable length: 100m max per UTP cables
LED: POWER, COL, LINK, TP/RCV
IEEE 802.3 10Base-T/AUI Ethernet
FCC Class A Subpart B of Part15 Requirement
No need for external power supply

5 x 10/100 / 1000Mbps Ethernet Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature range: -40 ° to & nbsp; 75 ° C

5 ports 10/100/1000Mbps Fast Ethernet switch
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Udvidet temperaturområde: -40° to +80°C

Top class media converts. Up to 2.6Gbit Fiber SFP
Full Managed with Many Features
RJ45 10/100/1000Mbit
Modbus TCP - Real Time Monitoring
IEEE1588v2 - Precision Time Protocol - Transparent Time
IEEE 802.1 Spank Tree Protocol
Port Mirroring - More to a
Loop Protection - Avoid Broadcast Loop
Supports Igmp Snooping
IP Sourcs Guard - Protects against Spoofing
SMTP, Sylog, Trap
with LFP and LLCF - Link Forward Carry Through.
Supply Voltage: 9 - 48VDC, 24VAC
Operating temperature: -40 - +75°C
DIN bracket
SFP module and power supply is to be purchased

1-port RS422/485 serial device server, MOXA NPort 5110A

Only 1 W power consumption
Speedy 3-step web-based configuration
Surge protection for serial, Ethernet, and power lines
COM port grouping and UDP multicast applications
Screw connectors for secure installation
Real COM/TTY drivers for Windows and Linux
Standard TCP/IP interface and versatile TCP and UDP operation modes
Connect up to 8 TCP hosts

PoE injector
2 x 10/100 / 1000Mbit RJ45 (PoE)
UTP / TCP Cat.5e or over
Rugged Aluminum, IP30 protection
Maximum POE 95watts at 56VDC input
Dust temperature: -40 ° C ~ 75 ° C
humidity: 5% to 95% (Non-condensing)
Dimensions: 103.5 x 32 x 81.5 mm & nbsp;
Metal housing with IP30 density
DIN rail and Wall Mount

1000Mbit Multi Mode Media Converter with SC connector to RJ45
1000BASE-SX / LX to 10/100/1000BASE-T 802.3at PoE
1 x RJ45 10/100/1000base-T with PoE+ (30W)
1 x 1000base-SX/LX Fiber - SC connector Multi Mode
Multi Mode 62.5/125my / 50/125my
IEEE 802.3/802.3u/802.3ab/802.3z/802.3x Ethernet standard
DIN rail mounting
Supply voltages: 12 - 48VDC or 24VAC with PoE out
PSU not included
IP30
Operating temperature: -40°C to +75°C

External COM port via Ethernet and Internet
Can also provide Pair connection (back-to-back)
Small size for easy installation
Genuine COM / TTY drivers for Windows and Linux
Standard TCP/IP interface and versatile operating modes
Easy-to-use Windows multi-device server configuration tool
Built-in 15 KV ESD protection for all serial signals
SNMP MIB-II for network management
Configure via Telnet or web browser
Power supply included

External COM port via Ethernet and Internet

Nport RS232 serielportserver 12-48VDC with extended temperature.

Multimode version, 850 nm
connector: DB15 Han to Ethernet, ST connector for 10Base-FL
Option Purchase: Aui cable for DB15
Fiber: 62.5 / 125um Multi mode Duplex to 10Base-FL
Max. Length of DB15 Cable of 50m
2 km Max at Multi Mode Cable
0 to 55 degrees (Standard operation)
10 to 90% (non-condensing)
IEEE 10Base-5 / FL Ethernet
sqe on / off

Tilbehør: SMS software til RS232 GSM modem1

External COM port and DI / DO via Ethernet and Internet
built-in web server
3 x Shift relays Expanses Max. 30 VDC 1A
3 x digital contact inputs
1 x RS232 (DB9 Male), RS422 or RS485 (screw terminal)
1 x Ethernet 10 / 100Mbit
Power supply from 9 to 24 VDC

2 Ports SFP PCI Express
10 gigabit ethernet
Interface: SFP fiber optic
Chipset: Intel 82599ES
OS Support: Win 7/8 / 8.1 / 10 / DOS / Linux
Power consumption: 5.5W
Certificates: FCC, CE, RoHS
Operating temperature: 0-55 degrees

Multi-function media converter - has it all!!
Connect 2 fiber networks with different speeds, e.g. 100Mbit with 1000Mbit
Connect 2 fiber networks which are Multi Mode and Single Mode
Media converter with 2 x fiber ports - redundant mode
Media converter with 2 x fiber ports - switch mode
Fiber into port 1 and Fiber on from Port 2 with 1 x RJ45
SFP slot for 100Mbit, 1Gbit, 2.5Gbit SFP transceivers
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Additional SFP modules.
12 - 48VDC redundant and 24VAC
Power consumption: 4.8 Watt
Power supply not included
Dimensions: 135 x 87 x 32 mm
Weight: 505g
IP30
Operating temperature -40 to +75°C
DIN rail and wall mounting

4 port PoE pass through - 10/100/1000Mbit
1 x RJ45 PoE in (data + PoE++) - 95 Watt
Mid-span and End-span
4 x RJ45 PoE out (data + PoE+) - 30 Watt
PoE out pin: +1/2, -3/6
PoE output power, total is max. 75 Watt
PoE input voltage 50 - 57VDC
Temperature: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
Your bracket

Ethernet med PoE over RG59 Coax-kabel - VDSL princip. 
Forlæng PoE-forbindelsen op til 500 m via Coax kabel
Egnet til IP kamera m/Poe over eksisterende Coax-kabler.

Break 100 meter border with VDSL over RG59 Coax cable
1 x RJ45 10/100 / 1000Mbit
Up to 300mbit / s - duplex (automatic speed optimization)
Unroubing Data connection
Temperature: 0-50 ° C
5VDC 2A Power supply included
75Ω cable must be used
Use 2 pcs. Eth-VDSL-RG + G to a connection

1x SIM 4G LTE
1x RJ45 PoE-PSE 802.3at
50-57VDC power input
Cellular & Config, NAT / Bridge Mode
OpenVPN, Packet Filter, MAC Filter, IPS
-30°C ~ 70°C operating tempeture
Optional: DIN-Rail, Wall-Mount, Power Adapter

8-ports Gigabit switch med intern strømforsyning

Embedded high power injector max. 60W for each PoE port
IEEE 802.3at/af PoE compliant
Power Protection: OVP, OCP, SCP
Compact design with wall mounted capability
UL/CB -certified external power adaptor of 120w
Per port PoE(Mode A, Mode B) On-Off Control by DIP Switch

5 x 10/100 / 1000Mbps Ethernet Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature range: -10 ° to 70 ° C

AUI converter for UTP cable, external supply
1 x DB15 AUI female 10 Base-5 (AUI)
1 x RJ45 female 10 Base-T
Max cable length: 500m max per (Thick Ethernet), 100m max per UTP cable
LED: POWER, COL, LINK, TP / RCV
IEEE 802.3 10Base-T / AUI Ethernet
IEEE 802.2 10Base-T/10Base-2
FCC Class A Subpart B or Part15 Requirement

IP67 sealed media converter, ideal for Camcorder, AP etc.
1 port 1000Mbit fiber SFP slot
SFP slot for Single Mode or Multi Mode optical transceiver
1 port 100/100/1000Mbit RJ45
Autodetection of PD equipment (devices that must be powered by PoE)
PoE+ out: 30Watt
End-span: + on 1/2, - on 3/6
IK10 rated for vandal protection
6kV ESD protection
Supply voltage: 24 - 56VDC (Terminal block)
Temperature range: -40 - +75°C
Plug and Play
Dimensions: 170 x 44 x 73 mm
Wall mounting

Unmanaged 8 ports switch
Store-and-forward arkitektur
-40 °C - +75 °C driftstemperatur
8 x 10/100 Mbps speed auto negotiation
+10 ~ +30 VDC power input
DIN-Rail Mounting

PoE++ power supply via Ethernet cable, up to 60 Watt
LAN without PoE in, gives LAN with PoE out
PoE++ 48-53VDC/60W
Mid-span and End-span give 60Watt
For 100/1000/2500/5000Mbit networks.
Power is supplied from 48 - 54VDC
Temperature range: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
DIN mount

PoE++ splitter - separate DC and Data
Data without PoE to equipment
DC voltage output to non-PoE device
Max. 70 Watt
Data is 10/100/1000Mbit/s
PoE 802.3at/bt
End-span + Mid-span
End-span or Mid-span
2  x RJ45 interfaces
1 x RJ45 port Data + Power input
1 x RJ45 port Data output
2 x DC output (4-pin terminal block)
DC output 12VDC or 24VDC w/DIP switch
Size: 135 x 88 x 32 mm
DIN-mount
Weight: 445g

Converter 10Base-T to 10Base-2
1 x RJ45 from Hub / Station select swich
1 x BNC to 10 Base-2
100m max. per UTP cable
185m max. Coax
12V DC, 1 Amp
0 to 55 ° C
10 to 90% (Non-Condensing)
IEEE 802.3 10Base-T / 10Base-2
Network: Star - CSMA / CD

1000Mbit Multimode Media Converter for RJ45
1 x RJ45 10/100 / 1000BaseT
1 x 1000BaseSX / LX with SC connector Multimode
Back-Pressure in Half-Duplex
Auto MDI / MDI -X function in Store-and-forward mechanism
Up to 220m / 550m
Dimensions: 97 x 70 x 26 mm
Operating temperature: 0 - + 50 ° C
Power supply: 5VDC / 2A included

Single-Use RJ45 port lock in plastic to ensure network ports
Physical blockage of port
mounted and dismounted without tools
Serial number on each lock for identification and security

Serial Device Server for RS232 / RS422 / RS485 with WiFi

External COM port over Ethernet and Internet
RS232/422/485
Atop SE5201-DB Serial Device Server
10/100Mbit Ethernet.
Serial port via DB9 male connector
Supports TCP Server/Client, UDP, Virtual COM and Tunneling modes
Power is supplied from 9 - 30VDC or 5VDC (power jack)
Power supply not included
DIN kit (option)
Dimensions: 65 x 78 x 28mm (without wall bracket)
Dimensions: 88.5 x 84 x 27.8mm (with wall bracket and DB9 port)

5 ports 10/100/1000Mbps Fast Ethernet switch
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -10° to 70°C

External COM port via Ethernet and Internet.

1-port RS-232 serial device servers

Rest storage

2 Ports Repeater to 10 Base2 and 10 Base5 Network
BNC / Aui Ethernet
can convert between Aui and BNC networks.

4 ch Network extender over 2-wire, RJ45 or Coax cable
Provides transparent Ethernet connection up to 2000 meters
Range with up to 46Mbps: max. 1200 meters COAX
Range with up to 28Mbps: max. 1000 meters RJ11
Range with up to 73Mbps: max. 699 meters RJ45 UTP
Range depends on cable quality etc.
4 x RJ45 for LAN
1 x RJ45 for Link (RJ11 can also fit in the female connector
1 x BNC Coax 75ohm
DIP switch to select Master or Slave mode
Dimensions: 155 x 86 x 26 mm
Cabinet: Metal
Weight: 347g
Supply voltage: 12VDC/1A
Temperature: 0 - +50°C

PoE injector
2 x 10/100 / 1000Mbit RJ45 (PoE)
UTP / TCP Cat.5e or over
Rugged Aluminum, IP30 protection
Maximum POE 95watts at 56VDC input
Operating Temperature: -40 ° C ~ 75 ° C
Humidity: 5% to 95% (Non-condensing)
Dimensions: 103.5 x 32 x 81.5 mm & nbsp;
Compliant with 95W Power over HDBaseT (PoH) Standard
Metal housing with IP30 density
DIN rail and wall bracket

Unmanaged 5 ports industriswitch
4 x RJ45 10/100Mbit
1 x SC fiber 100Mbit Single Mode
IP50

Isolator for 1000 Mbit network, one port
Insulation on all 4 pairs.
Transient protector - Remember the earth connection (screw)
2 x RJ45 female
Max. Discharge current (fine LL): 40A (8/20 microSec)
Max. Discharge current (coarse LE): 2.5 kA (8/20 microSec)
Residual voltage: <5V (1.2/50 microSec)
Hi-Pot (Pri to Sec) isolation: 1500Vrms, 1mA, 60 seconds
Cannot transmit PoE
Dimensions: 72 x 50 x 25 mm

Unmanaged 5 Ports Industriswitch
4 x RJ45 10/100Mbit
1 x St Fiber 100Mbit Multi Mode
IP40

External COM port via Ethernet and Internet - for fiber cable
SerialportServer 1 x RS232 / 422/485
Fiber is 100Mbit SFP (Single Mode or Multi Mode)

Media converter for 100/1000Base-X SFP transceiver
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase additional Gigabit SFP modules.
1 x RJ45 10/100/1000Base-TX PoE+
1 x SFP 100/1000 Mbit
Power supply: 48-56VDC
PSU not included
End-span PoE (1/2(+), 3/6(-))
PoE power is max. 36 Watt
DIN rail or wall mounting
Temperature: -40 to +75°C
Dimensions: 30 x 70 x 104 mm

Rest storage

Vdsl2 router with 4 x RJ45 and WiFi
Network connection up to 1.4 km above 2-wire telephone cables
point to point federal
2 pcs. Eth-VDSL2ROUTER for a connection

54 Mbit access point med PoE, udendørs

For harsh industrial and outdoor environments.
Voltage over Ethernet - PoE - no external voltage source
Extend a PoE voltage and data signal up to 100m
PoE output power: up to 22Watt
Over a single CAT 6 cable (STP cables are recommended).
Cascade: Maximum 4 ETH-BOOST-POE-1G-U units in extension
Extends the distance up to 500m
IP66

Unmanaged 5 port 10/100/1000Mbit
Redundant power input
9 - 48VDC
24 VAC