Products

100Mbit fiber media converter to RJ45, Single Mode
1 x RJ45 10 / 100Mbit | 1 x SC 100Mbit Singlemode
1310nm
up to 35 km

Ethernet/Wiegand konverter

REMAINING STOCK

VDSL2 router with 4 x RJ45 and Wifi

Network connection up to 1.4 km over 2-wire telephone cables

Point to point connection

2 pcs. ETH-VDSL2ROUTER for one connection

REMAINING STOCK

Ethernet over telephone cable 1 x twisted pair cable

VDSL module with 8 port switch and SFP slot

Up to 100Mbps at 300 meters

Up to 1km - automatic speed adjustment

Break the 100 meter limit with a VDSL connection

Transparent data connection

8 port VDSL2 switch with 2 shared RJ45/SFP ports

Purchase ETH-VDSL2ROUTER to create a link

High Speed ​​Ethernet Adapter for USB3.0
RJ45 female and USB 3.0 male (type A)
Full duplex 10/100 / 1000Mbit
Supplied via USB port
OS support WIN2000, XP, VISTA , 7, 8, 10
Black with 10 cm cable

WDN media converter for 1-core fiber, Singlemode SC.
1 x RJ45 10/100 / 1000Base-TX | 1 x 1-core (simples) single mode fiber with SC
Must be used with ETH-RJ45G-WDM SA
Up to 15 km
WDM wavelenght-division-multiplexing - only for simplex fiber cable
Must be WDM converter at both ends of the fiber

10/100 / 1000Base-TX to 1000Base-LX single mode, 15 km
WDM Wavelength Division Multiplexing - Simplex fiber cable only
Must be WDM converter at both ends of the fiber.

Replaced by ETH-RJ45G-SFP2

1000Mbit Media converter can connect 2 different fiber networks and RJ45
Is suitable as a node in Gigabit fiber networks with 1 x RJ45
1 x RJ45 10/100/1000Mbit
2 x 1000Mbit SFP slot for SFP modules Single Mode and/or Multi Mode
Can also connect Single Mode networks with Multi Mode networks
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase additional Gigabit SFP modules.
5VDC power supply included

Media converter for 100/1000Base-X SFP module
Can power equipment with PoE+
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase 100Mbit / Gigabit SFP modules.
10/100/1000Base-TX
56VDC PSU included.
Mid-span PoE (PSE) (4.5/7.8)
PoE power is max. 30 Watt
Alarm in case of link failure

10/100/1000Base-TX to 1000Base-LX
1310 nm, Single Mode
Up to 10 km
Uses singlemode fiber cable (9/125 µm)
Only for 1000Mbit fiber, Single Mode

Media converter 1000Mbit Multi Mode SC duplex, 550 meters

10/100/1000Base-TX to 1000Base-SX, 850nm

Multimode fiber cable (50/125 µm or 62.5/125 µm)

Operating temperature 0 to 50°C

DC 5V/2A

Converter 10Base-T to 10Base-2
1 x RJ45 from Hub / Station select swich
1 x BNC to 10 Base-2
100m max. per UTP cable
185m max. Coax
12V DC, 1 Amp
0 to 55 ° C
10 to 90% (Non-Condensing)
IEEE 802.3 10Base-T / 10Base-2
Network: Star - CSMA / CD

AUI converter to UTP cable, external supply
1 x DB15 AUI female 10 Base-5 (AUI)
1 x RJ45 female 10 Base-T
Max. cable length: max. 500 m per (thick Ethernet), max. 100 m per UTP cable
LED: POWER, COL, LINK, TP / RCV
IEEE 802.3 10Base-T / AUI Ethernet
IEEE 802.2 10Base-T/10Base-2
FCC Class A Subpart B or Part15 Requirements

PoE ULTRA Power Supply via Ethernet Cable, 60 Watt
Output Voltage: 50 - 57VDC 1.2Amp
Supporter Mid-span and End-span
Using the 4 x Pair for PoE voltage

IEEE 802.3at / of PoE standard compliant
Compatible with all IEEE 802.3at/af PoE devices
56VDC 50pwatt PoE power
Splits 56V DC power over RJ-45 to 12VDC or 19VDC or 24VDC
External power supply up to 100 meters

Passive PoE Injector with 12 / 19 / 24 VDC 0.7A output
From Active to Passive PoE converter
PoE input port: IEEE 802.3af/at RJ-45 STP / PD. Supplied from an active PoE switch
Passive PoE output port: non-802.3af/at RJ-45 STP / PSE. For equipment that is NOT for active PoE.

LAN without PoE voltage gives LAN with PoE
4 port PoE power supply 30 Watt per port
Connects between non-PoE switch and e.g. IP cameras with PoE
For 10/100/1000Mbit networks
Power supply included
Can be powered with 52-56VDC / 122Watt
Pin 4/5 +, 7/8 - (Mid-span)
Dimensions: 97 x 70 x 26 mm
Temp: -10 - +70°C

24-ports PoE strømforsyning 30 W, 10/100 Mbit

Switches without PoE can with this Injector "upgraded" to PoE switch
24 ports PoE full power supply

Per port DC 52V 30.8/15.4 watts
LAN without PoE in, LAN with PoE out
10 / 100 / 1000Mbit network

Max PoE 440 Watts

Splitter for PoE via Ethernet cable
LAN with PoE in, gives LAN without PoE out
12 VDC 2A or 24 VDC 1A next to other equipment

10/100 / 1000Mbit PoE Network Extender
Extend the network cable with PoE over the magic 100 meters
4 pieces. Extenders provide a maximum distance of 500 meters
Extenders are powered from PoE and pass PoE on to the next Extender
Dimensions: 94 x 70 x 26 mm

PoE In: Max 30.8 Watts

PoE Out: Max 26 Watts
Weight: 189g

2 ports 10 Gbit PCI-Express netkort med SFP+ og CX4

10 Gbit PCI-Express netkort med SFP+

1000 Mbps PCI-Express Net Card for SFP
Buy 1000Mbit SFP Module Single Mode or Multi Mode
Driver For: XP / 2003, Vista / 2008, Win 7, Linux 64-bit, Mac OS X
PCI Express, 1 Lane
SFP module can be 62.5/125my or 50/125my
Operating temperature: 0 - +65°C
Dim: 121.4 x 119.5 mm

REMAINDER SALE

Korenix Jetcard 2215
4-port 100 Mbit PCI network card with Switch and PoE

Mini PCI-Express Gigabit network card

Modbus / TCP I / O module with built-in Web server
Modbus / TCP and Modbus / UDP protocols
2 x RJ45 Ethernet switch to Daisy-Chain topology
Dual Watchdog
Operating temperature range: - 25 to + 75 ° C
I / O Pair connection - Ingang refles in the second's exit
8 x Digital input: Wet (Apply Volt), Dry (Contact) - Digital Input: 0 - + 50CDC or Open / GND
8 x Digital Outout, Open Collector 0 - 40VDC / 650MA
Dimensions: 76 mm x 120 mm x 38 mm
Supply voltage: 12 - 48vdc, 4 watt
your bracket Wall mounting

Ethernet I/O module Modbus/TCP / UDP slave
1 x RJ45 Ethernet
Redundant Power Supply
Protocol: TCP, UDP, HTTP, DHCP, BOOTP and TFTP
Web configuration and firmware update via Ethernet
2 x digital input (Wet - volts supplied)
2 x Relay, COM, NO - 250VAC 5A, 30VDC 5A
Avoid inductive load to relay contacts
With locked DI and 32-bit 3.5kHz counter
With I/O pair - input is mirrored in the other's output
Dual-watchdog with Power-on-safe value
Supply voltage: 12 - 48VDC, 1.7 Watt
Dimensions: 98 x 52 x 27 mm
Operating temperature: -25 - +75°C

Ethernet-based relay module with Modbus
with I/O Pair Function
Digital signals are mirrored on another module outputs
Power Relay, 250vac, 30vdc, 5A
DINr
Supply voltage: 10 - 30vdc, 3 watts
Dim: 180 x 111 x 70 mm
Operating temperature: -25 - +75°C

Media Converter 100Mbit Multimode ST duplex - 2km
1 x RJ45 10 / 100Mbit
1 x ST 100Mbit
1310nm
5VDC
Dimensions: 97 x 69 x 26 mm

10 / 100Base-T to 100Base-FX duplex multi mode
Multi mode up to 2km
SC - 50my and 62,5my - 1310nm
Temperatur: -40 - +75°C 
5VDC PSU included.

Ethernet through the same phase of electric cables - sold as a set (2 pcs.)

Not suitable for industrial use.

Rest storage

2 Ports Repeater to 10 Base2 and 10 Base5 Network
BNC / Aui Ethernet
can convert between Aui and BNC networks.

AUI converter to UTP cable
1 x DB15 male to 10 Base-5 (AUI)
1 x RJ45 jack for 10 Base-T
Max cable length: 100m max per UTP cables
LED: POWER, COL, LINK, TP/RCV
IEEE 802.3 10Base-T/AUI Ethernet
FCC Class A Subpart B of Part15 Requirement
No need for external power supply

Unmanaged 8 ports industry switch & nbsp;
8 x 10/100 / 1000Mbit with RJ45
IP30 -Set metal housing
9 - 48VDC, 4Watt - Redundancy PSU input

Unmanaged 8 ports industriswitch 
8 x 10/100Mbit med RJ45
IP50-tæt - metalkabinet
9 - 48VDC, 3,15Watt - Redundancy PSU input

8 port 10/100/1000Mbit unmanaged switch in mini format.
Powered from PoE or 5VDC (PSU not included).
Additional purchases, if any DC5V/2A-RQ power supply.
Does NOT have PoE out.
Dimensions: 155 x 86 x 26 mm
Weight: 378g

8 Ports Managed Switch With Fast Recovery and Ring
Erps (Ethernet Ring Protection Switching)
8 x RJ45 10/100/1000Mbit Switch
Store and Forward Architecture, Broadcast Storm Checking
1.5mbits SRAM Packet Buffer
Automatic Address Learning and Address Aging
Supply paging: 12 - 48VDC or 24VAC

Unmanaged Industriswitch med 4 x RJ45 10/100Mbit
2 x SFP - 100Mbit
12 - 48VDC, 16Watt

Unmanaged 6 port industrial switch
6 x RJ45 10 / 100Mbit
Redundant PSU input

Unmanaged industrial switch with 6 ports
6 x RJ45 10/100 Mbit

IP67 sealed enclosure - wall mounting

REMAINDER SALE

Unmanaged 5 port industrial switch
4 x RJ45 10/100 Mbit
1 x ST fiber 100Mbit Multi Mode
IP50

Unmanaged 5 port 10/100/1000Mbit

Redundant power input

9 - 48VDC

24 VAC

Dimensions: 135 x 88 x 32 mm

24 ports 10/100/1000Mbit non managed Ethernet switch - 48Gbit/s.
100 - 240VAC PSU indbygget
Metalchassis. 
Rackbeslag medfølger.

16 port Gigabit unmanaged Ethernet switch
100 - 240VAC PSU is built in.
Metal chassis.
Rack mount included

Managed switch. 8 x SFP, 2 x RJ45 ports
8 x fiber ports - 100/1000Base-SX / LX mini-GBIC SFP slots
2 x copper ports - 10/100/1000Mbit RJ45
IP30 enclosure
DIN rail and wall mounting
24:02 48V DC, redundant power
Can accept 24VAC
-40 to +75°C operating temperature
Dimensions: 152 x 107 x 72 mm

Managed Gigabit switch. 8 x RJ45, 2 x SFP
8 x 10/100/1000Mbit with RJ45 connectors
2 x 100/1000Mbit to SFP
Supply voltage: 12 - 48VDC redundant
Also accepts 24VAC
Power consumption : max. 10W
DIN rail bracket
1 relay for alerting
Dimensions: 135 x 88 x 56 mm
Operating temperature: -40 - +75°C

1 GHz VESA PC, 512 MB RAM, 3 x USB, SD

Compact PC with 933 Mhz processor and 1 GB RAM

Compact PC with 933 Mhz processor and 1 GB RAM

Small embedded PC, fanless with Intel Atom CPU

Emulates screens information
​Max resolution: 1920 x 1080, 2048 x 1152
With Pass Through HDMI (F) and HDMI (F)
5V DC (via USB)
Dimensions 22 x 51 x 80 mm

Emuler skærmens EDID informationer

Adapter DVI-D Male to DVI-I female

DVI – VGA, DVI han - DB15HD hun

DVI-I kønsskifter, hun - hun

DVI - VGA
DVI Female - DB15HD he

Same picture on 4 DVI-D monitors
5 x DVI-D female - Single Link
1 x DVI-D female input
4 x DVI-D female outputs
Resolution up to 1920 x 1200 pixels
Distance with DVI-D cable to DVI monitor up to 10 meters
Use good quality DVI-D cables - K-DVIM-M-SLACxx from DANBIT

DVI digital splitter with 2 DVI digital outputs
same image on 2 DVI-D monitors
Input: 1 x DVI-D Female
Output: 2 x DVI-D Female
Support Dual Link DVI-D singnal transmission, resolution 640x480@60Hz to 3840x2160@30Hz, Compatible with HDMI 1080P
Support Dual Link DVI-D single transmission
Easy installation!
Max 10 meter cables (good quality)
Bandwidth 340MHz
If resolution is higher than 1920x1080@60Hz, there have to be used DUAL LINK DVI-D cables.
Use good quality DVI-D cables - K-DVIM-M-SLACXX From Danbit
Note !! At DVI-D to VGA on the output, it requires an active converter!
179x66x28mm
DC input 5~12Vdc, 0.8A

Slimline DVD-ROM, 8x DVD, 24x CD-ROM, kun læser

Slimline CD og DVD brænder

Dust cap for ST adapter. Connector for ST fiber cables

Dust cap for ST connector on cable (50 pcs.)

Dust cap for SC connector on adapter (50 pcs.)

Dust cap for SC connector on cable (50 pcs.)
Several colors may appear

Dust cap for LC plug on cable (50 pcs.)

Power socket for door frame, w / monitor funk., 45 mm
Holding force: 900 kg.
Voltage: 12 VDC, 250 mA. Not included. For example, use DC12V / 1A-R-Q
Dimensions: 202 x 45 x 32 mm (H x W x D)
max. (H x B)

Electric door lock that is locked without tension.
Holding force 1000 KG
supply: 12 / 24V DC 130 / 65mA when activated
Suitable for Scandinavian types
Operating temperature: -20 ° C to + 40 ° C
Multi voltage 12-24V AC / DC
approved for use in fire-resistant doors E120 / A120 / EI120
Fail secure (PTO): SL 510
Fail safe (PTL): SL 511
Latch bolt adjustable left / right
Built in "By status" sensor
Status monitoring: latch, anti-thrust bolt & amp; live handle
Mechanical key override

Bolt lock for frame, locked with tension,
holding force 1000 KG
Built-in time control and reporting contact
12VDC 900 / 150mA start / operating current
Time delay: 0.3.6.9 sec.
CE & amp; MA Certified
Dimensions: 34 x 38 mm

Electric door lock that is open without voltage.
Holding force 1000 KG
supply: 12 / 24V DC 130 / 65mA when activated
Suitable for Scandinavian types
Operating temperature: -20 ° C to + 40 ° C
Multi voltage 12-24V AC / DC
approved for use in fire-resistant doors E120 / A120 / EI120
Fail secure (PTO): SL 620
Fail safe (PTL): SL 621
Latch bolt adjustable left / right
Built in "By status" sensor
Status monitoring: latch, anti-thrust bolt live handle
Mechanical key override

PCI Express card with 96 TTL I/O channels and 3 counters

X1 PCI Express interface
96-CH digital TTL/DTL inputs/outputs
Emulates 4/2/1 industry standard 8255 PPI (mode 0)
Direct interface with OPTO-22 compatible I/O modules
Output port status read back
On board 8254 timer/counter chip
Programmable interrupt source
Support Windows 7/8 X64/X86 and Windows 2008 R2

3½” floppy to floppy drive
Formatted to 1.44 MB
The price is per. 1 piece. floppy disk
Get a quote if they need to be formatted to 720kB

Supports a 32-bit 5 V PCI Express bus
24/48/96-CH digital TTL/DTL inputs/outputs
Emulates 2 industry standard 8255 PPI (mode 0)
Support Windows 7/8 X64/X86 and Windows 2008 R2
Output port status read back
On board 8254 timer/counter chip
Programmable interrupt source
12V and 5V power supply to OPTO-22 (Direct interface with OPTO-22)

Mouse / keyboard adapter that emulates both USB to PS / 2 ports

250 VAC klæberelæ til DIN skinne