Network products / Wifi / PoE / RJ45-Fiber

RJ45/LAN1. Bravo LAN protector

RJ45 LAN port protector for twisted pair ethernet port or twisted apir wired network.

10 ports 10/100/1000Mbps Fast Ethernet switch + 2 x 100/1000Mbps SFP slot
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -40° til 75°C

Compact 5 port Ethernet switch for 100Mbps
Not Managed
Very economical: max. 2 Watt
Supply voltage: 12 - 48VDC
Can also be powered with 24VDC
With redundant voltage input
Dimensions: 104 x 70 x 30 mm
Weight: 255 grams
IP30, metal housing
DIN bracket

QR8041

RJ45 Cat 5e / 6a
Wall installation to 8-conductor (8P8C)
TIA-568A / B colored Heating installation
No tools are needed, easy installation

WiFi concealed module for VESA PC

Residual sale

1 x set of PoE injector and splitter
Injector Input: 90-240VAC, Output: 48VDC IEEE802.3AF
Injektior Ports: C6 POWER, RJ45 Data Input, RJ45 Data + PoE Output
Splitter input: PoE 13.5-60VDC, Output: 12VDC
Splitter ports: RJ45 Data + PoE input, RJ45 Data output, 5.5 mm DC Pwer Output

PASSIVE PoE means that the switch supply voltage is on the 4 PSE ports
only used for PoE 802.3af / at PD equipment but ONLY with 48-55VDC supply voltage to the switch
5 port 10 / 100Mbit Switch with 4 PoE ports
4 x PoE RJ45 PASSIVE PoE
1 x RJ45 Uplink
48Watt per PASSIVE PoE port
Supply voltage: 12V DC - 55V

12 mini slots media converter box / casing
1U rack mounting | 1/10 / 1000M
Dimensions: 485 (W) x 270 (D) x 44.5 (H)
Operating temperature: 0- 50

WLAN LINK - AP (auto WDS), AP (TDMA), Station (WDS/TDMA) and Station (ARPNAT)
Supports ATPC function to reduce mutual interference between the CPEs
WMM (Wi-Fi multimedia) gives higher priority to multimedia transmission
Coverage threshold to limit the weak signal from clients on the line
Real-time Wi-Fi channel analysis graph and client limit control for better performance
Supports Terminal Fast Roaming with 802.11k, 802.11v and 802.11r

12 x 10/100/1000Mbps + 4 x 100/1000Mbps SFP porte
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
8K MAC Address tabel
Jumbo Frame Support: 12.2K
Surge Protection: 2,000 VDC Support
ESD Protection: 6,000 VDC Support
Redundant Power Input Design: 12~48VDC
1 Relay Output til Power Failure Warning
IP30 Rugged Metal Case Design
DIN-Rail and Wall Mount Support
Udvidet temperaturområde: -40° to 75° C

Omni antenna for 4G, LTE, vandal-proof
Screw Mounting, M12 Thread
3 meter Cable
Temperature: -40 ℃ ~ + 85 ℃
Connector: SMA Male

12 x 10/100/1000Mbps + 4 x 100/1000Mbps SFP porte
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
8K MAC Address tabel
Jumbo Frame Support: 12.2K
Surge Protection: 2,000 VDC Support
ESD Protection: 6,000 VDC Support
Redundant Power Input Design: 12~48VDC
1 Relay Output til Power Failure Warning
IP30 Rugged Metal Case Design
DIN-Rail and Wall Mount Support
Temperaturområde: -10° to 70° C

Original Intel antenna
2.5 / 5GHz
2 x RSMA male, 1.2 meter cable
Suitable for wall mounting

8 x 10/100 / 1000Tx RJ45 (30W / port)
2 x 10/100 / 1000Tx RJ45
2 x 100/1000 SFP Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC > UL Class I, Division 2 Certified
Power Supply: 48 ~ 55VDC
Built-in Relay Output for Power Failure
IP30 Rugged Metal Case Design
DIN Rail and Wall Mounting
Operating Temperature STD: -40 ° to 75 ° C

16 RJ45 Ethernet ports
10/100/1000 Mbps with auto-adjusting MDI/MDI-X
DIN-rail and wall-mounting
Metal enclosure rated at IP30
Dual power input for redundancy
8K MAC address table
Working tempeture -40 to 75 C degrees
12 to 48VDC input

16 ports 10/100Mbit + 2 ports 100/1000Mbit/mini-GBIC Combo
7.2 Gbps Back-Plane (Switching Fabric)
Store-and-Forward Switching Architecture
1 Mbits Packet Buffer
8K MAC Address Table
Wide-Range Redundant Power Design 12 - 48VDC
Transientbeskyttelse 3.000 VDC på Power Line
6.000 VDC Ethernet ESD Protection
IP30 rpbust aluminum kabinet
DIN-Rail eller Panel monterbar

16 ports 10/100Mbit + 2 ports 10/100/1000Mbit/mini-GBIC Combo
7.2 Gbps Back-Plane (Switching Fabric)
Store-and-Forward Switching Architecture
1 Mbits Packet Buffer
8K MAC Address Table
Wide-Range Redundant Power Design 12 - 48VDC
Transientbeskyttelse 3.000 VDC på Power Line
6.000 VDC Ethernet ESD Protection
IP30 rpbust aluminum kabinet
DIN-Rail eller Panel monterbar

8 ports 10/100/1000Mbps Fast Ethernet switch + 4 x 100/1000Mbps SFP slot
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Udvidet temperaturområde: -40° til 75°C

8 ports 10/100/1000Mbps Fast Ethernet switch + 4 x 100/1000Mbps SFP slot
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -10° til 70°C

> Ø54 x 24mm, M12 thread, 19mm
Bandwidth ± 90/280 MHz
Gain 3dBi
Vertical vertical
Max wind speed 200km / h

24 ports PoE++ strømforsyning med fuld effekt 95 Watt per port
LAN uden PoE ind, giver LAN med PoE ud
Til 10/100/1000 netværk

8 ports 10/100/1000Mbps Fast Ethernet switch
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
16Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -40° til 75°C

PoE++ power supply via Ethernet cable, up to 60 Watt
LAN without PoE in, gives LAN with PoE out
PoE++ 48-53VDC/60W
Mid-span and End-span give 60Watt
For 100/1000/2500/5000Mbit networks.
Power is supplied from 48 - 54VDC
Temperature range: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
DIN mount

5 ports 10/100/1000Mbps Fast Ethernet switch
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Udvidet temperaturområde: -40° to +80°C

PoE++ power supply via Ethernet cable, up to 95 Watt
LAN without PoE in, gives LAN with PoE out
PoE++ 54VDC/95W
Mid-span and End-span give 95 Watts
For 100/1000/2500/5000Mbit networks.
PoE power output DC 24V~54V input: Max. 89.5W@1m cable, Max. 75W@100m cable
PoE power output DC 12V input: Max. 60W@1m cable, Max. 52W@100m cable
Temperature range: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
DIN installation
Powersupply input from 12 - 54VDC

5 ports 10/100/1000Mbps Fast Ethernet switch
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -10° to 70°C

4 x 10/100/1G/2.5G/5GBASE-T Gbit RJ45 data input
4 x 10/100/1G/2.5G/5GBASE-T Gbit RJ45 data + PoE output
100~240VAC, 3.33Amp PSU with DC 52V~54V power output
Complies with 802.3bt PoE Plus Plus end-span and mid-span PSE
Backward compatible with IEEE 802.3at PoE Plus end-span/mid-span PSE
Up to 4 IEEE 802.3at/IEEE 802.3bt PoE devices powered
4 x PoE ports with 90-watt 802.3bt PoE++ type 4 PSE or 95-watt PoH PoE injector function
4 x PoE ports support 802.3at end-span/mid-span PoE+ 36-watt injector function
DIP switch for 802.3bt, PoH and Force mode selection
Auto detects if devices can be PoE powered (PD)
Circuit protection prevents power interference between ports
Forwards both Ethernet data and PoE power to remote device over a 100-meter distance
EEE 802.3 Ethernet, IEEE 802.3u Fast Ethernet., IEEE 802.3ab Gigabit Ethernet
IEEE 802.3bz 2.5G/5GBASE-T, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
Dimensions: 94 x 70.3 x 39.2 mm
Weight: 275g
Enclosure: Metal case

Unmanaged 6 ports industriswitch
6 x RJ45 10/100Mbit
Redundant PSU input.

10 ports 10/100/1000Mbps Fast Ethernet switch + 2 100/1000Mbps SFP slot
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -10° til 70°C

24 ports PoE strømforsyning med 15,4 Watt per port
LAN uden PoE ind, giver LAN med PoE ud
Til 10/100Mbit netværk

8 ports 10/100/1000Mbps Fast Ethernet switch
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
16Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -10° to 70°C

LAN interface til termisk bonprinter

5 x 10/100 / 1000Mbps Ethernet Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature range: -40 ° to & nbsp; 75 ° C

24-ports PoE strømforsyning 30 W, 10/100 Mbit

5 x 10/100 / 1000Mbps Ethernet Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature range: -10 ° to 70 ° C

External COM port via Ethernet and Internet - for fiber cable
SerialportServer 1 x RS232 / 422/485
Fiber is 100Mbit SFP (Single Mode or Multi Mode)

PoE injector
2 x 10/100 / 1000Mbit RJ45 (PoE)
UTP / TCP Cat.5e or over
Rugged Aluminum, IP30 protection
Maximum POE 95watts at 56VDC input
Dust temperature: -40 ° C ~ 75 ° C
humidity: 5% to 95% (Non-condensing)
Dimensions: 103.5 x 32 x 81.5 mm & nbsp;
Metal housing with IP30 density
DIN rail and Wall Mount

Outdoor robust Dual Band Access Point etc.
AP, Gateway, Repeater, Wi-Fi Mesh
2.4GHz and 5GHz, 600/2400Mbit (3000Mbit)
Up to 256 clients Wi-Fi 6
1 x RJ45 Gigabit port PoE+
IEEE 802.11ac 2T2R - Wave 2
Up to 20dBm (EIRP)
4 x N-female connector
IP67 cast aluminum housing for mast mounting
Operating temperature: -40 - +70°C
Real-time Wifi channel analyzer
Dimensions: 295 x 231 x 80 mm
Weight: 2.5kg
Supply: PoE, 48V/0.5A (PoE+)

PoE ULTRA Power Supply via Ethernet Cable, 60 Watt
Output Voltage: 50 - 57VDC 1.2Amp
Supporter Mid-span and End-span
Using the 4 x Pair for PoE voltage

ETH-POE5 bruges til at spændingsforsyne netværksudstyr via det almindelige Kat. 5/6 Ethernet-kabel.

8 ports 10/100 / 1000Mbps Fast Ethernet switch + 2 100 / 1000Mbps SFP slot
Auto MDI / MDI-X Function
Store and Forward Switching Architecture
20Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum housing
DIN-Rail and Wall Mount
Temperature range: -10 ° to & nbsp; 70 ° C

High Speed Access Point - Dual Band
AP, Repeater, Bridge, Bridge to several
Up to 64 simultaneous users
2.4GHz, 5GHz
Transmission: aggregated up to 1200 Mbps
Transmit power: 500mW - adjustable
2 x 5dBi antennas - removable with good range
Ports: 1 x 10/100Mbps RJ45 WAN port
IP67 tight
Powered via passive PoE or supplied 24VDC adapter
Power consumption: less than 12 Watts
Dimensions: 380 x Ø54 mm
Temperature: -40 - +55°C

LAN without PoE voltage gives LAN with PoE
4 port PoE power supply 30 Watt per port
Connects between non-PoE switch and e.g. IP cameras with PoE
For 10/100/1000Mbit networks
Power supply included
Can be powered with 52-56VDC / 122Watt
Pin 4/5 +, 7/8 - (Mid-span)
Dimensions: 97 x 70 x 26 mm
Temp: -10 - +70°C

External COM port and DI / DO via Ethernet and Internet
built-in web server
3 x Shift relays Expanses Max. 30 VDC 1A
3 x digital contact inputs
1 x RS232 (DB9 Male), RS422 or RS485 (screw terminal)
1 x Ethernet 10 / 100Mbit
Power supply from 9 to 24 VDC

5 x 10/100 / 1000Mbps Ethernet ports + 2 x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane ( Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature Range: -40 to 75 ° C

8 x 10/100/1000Mbit - RJ45 med auto MDI/MDI-X
2 x SFP slot 100/1000Mbit fiber port
IP30 metalkabinet 
DIN rail og vægmontering
Redundant Power input
12 til 48VDC, redundant, med polaritetsbeskyttelse
AC input 24VAC power input er mulig
6000VDC Ethernet ESD beskyttelse
Udvidet temperatur -40 til 75°C
IEEE 802.3az

2.4GHz, 300Mbps AP, Gateway, Repeater, Bridge, WISP
802.11 b/g/n
Includes 2 pcs. 8dBi antennas
2 x N female
Transmission power: max. 500mW
1 x 10/100Mbps RJ45
For pipe mounting and wall mounting
WPA/WPA2, WPA-PSK
IP65
Power supply: PoC or PoE+ 48VDC (injector included)
Pin 4/5 +, 7/8 - PoE input.
Operating temperature: -20 - +70°C
Dimensions: 880 x 200 x 80mm
Weight 1.7kg

External COM port via Ethernet and Internet
RS422 / 485 Serial port via screw terminal
Power supplied from POE or 12 - 48VDC
Your mounting

Gummiprop/ blændprop til RJ45 stik.
Passer til Netværksudstyr, PC, Mac, AVudstyr, telefoner mm
Nem at anvende

PoE injector
2 x 10/100 / 1000Mbit RJ45 (PoE)
UTP / TCP Cat.5e or over
Rugged Aluminum, IP30 protection
Maximum POE 95watts at 56VDC input
Operating Temperature: -40 ° C ~ 75 ° C
Humidity: 5% to 95% (Non-condensing)
Dimensions: 103.5 x 32 x 81.5 mm & nbsp;
Compliant with 95W Power over HDBaseT (PoH) Standard
Metal housing with IP30 density
DIN rail and wall bracket

5 x 10/100 / 1000Mbps Ethernet ports + 2 x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane ( Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature Range: -10 - 70 ° C

8 & nbsp; ports 10/100 / 1000Mbps Fast Ethernet switch + 2 100 / 1000Mbps SFP slot
Auto MDI / MDI-X Function
Store and Forward Switching Architecture
20Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum housing
DIN-Rail and Wall Mount
Temperature range: -40 ° to 75 ° C

2 ports 10 Gbit PCI-Express netkort med SFP+ og CX4

Professional injector with light for cable identification.

Attach the light bulb at one end and in the opposite, the light will light.

5 x 10 / 100Mbps Ethernet ports + 2 x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric )
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature Range: -40 - 70 ° C

Steel whip antenna for LTE, GSM
Magnetic foot
Wide Band 2 - 6 GHz
With shortening coils
9dBi Gain, 50 ohms
3 meter cable
SMA he
Dimensions: 150 mm, Ø30 mm foot

Unmanaged 6 port industrial switch
6 x RJ45 10 / 100Mbit
Redundant PSU input

DSL / Cable VPN Router
IEEE 802.3, IEEE802.3u

4 x 10 / 100M Ethernet RJ-45 ports
1 x 10 / 100M WAN RJ-45 port
1 x RS 232 dial-up backup port
DDNS, UPnP
Up to 32 IPSec VPN tunnels
Supply: 12V DC, 1.2A

5 x 10 / 100Mbps Ethernet ports + 2 & nbsp; x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric )
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature Range: 0 - 70 ° C

RJ45 lock
RJ45 lock to stop accidental removal of the plug
Material: PLA (Plastic)
Dimensions: 15.5 x 13.8 x 18.3 mm

Built 100-240V AC power supply
POC - Power Over Cable power
Meets NOT PoE specifications.
Constant voltage out.
2 x RJ45 ports - data input and data + voltage output
output voltage: DC 12VDC 1A
DC output: + (4.5) - (7.8)
Data: 1,2,3,6
Dimensions: 82 x 44 x 55 mm (LxWxH )
Weight: 104g

PoE++ splitter - separate DC and Data
Data without PoE to equipment
DC voltage output to non-PoE device
Max. 70 Watt
Data is 10/100/1000Mbit/s
PoE 802.3at/bt
End-span + Mid-span
End-span or Mid-span
2  x RJ45 interfaces
1 x RJ45 port Data + Power input
1 x RJ45 port Data output
2 x DC output (4-pin terminal block)
DC output 12VDC or 24VDC w/DIP switch
Size: 135 x 88 x 32 mm
DIN-mount
Weight: 445g

Unmanaged 5 port 10/100/1000Mbit
Redundant power input
9 - 48VDC
24 VAC

IEEE 802.3AT / by POE standard compatible
Compatible with all IEEE 802.3AT / by PoE units
56VDC 50pwatt POE power
divides 56V DC power over RJ-45 to 12VDC or 19VDC or 24VDC
External power supply up to 100 meters

2.4GHz indoor omnidirectional antenna 0 dBi
Antenna for short range applications
1.5 meter cable, RSMA male connector
Robust, suitable for industrial machine
Gasket included - provides a watertight assembly

5 x 10/100 / 1000Mbps Ethernet ports + 1 x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store and Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature range: -40 ° to 75 ° C

4 x 10/100 / 1000Mbit, PoE + (30W) IEEE 802.3at
1 x 10/100 / 1000Mbit
2 x 100 / 1000Mbit SFP slot
14Gbps Back Plane
8K MAC Address Table
10.0 Kbytes Jumbo Frame
Overvoltage 2kV DC
ESD Protection 6kV DC
Redundant Power Input Design: 12 - 36VDC
1 Relay Output for Power Error Alarm
IP30 Rugged Metal Cabinet
DIN-Rail and Wall Mount including
Extended operating temperature: -10 - + 70 ° C

Built 100-240V AC power supply
POC - Power Over Cable power
Meets NOT PoE specifications.
Constant voltage out.
2 x RJ45 ports - data input and data + voltage output
output voltage: DC 24V 1A
DC output: + (4.5) - (7.8)
Data: 1,2,3,6
Dimensions: 82 x 44 x 55 mm (LxWxH )
Weight: 104g

Back piece for RJ45-PANEL front
Material: Plastic
Screw holes distance: 60mm
Color: White
Outer depth: 45mm
Inner depth: 43mm
Weight: 65g

5 x 10/100 / 1000Mbps Ethernet ports + 1 x 100 / 1000Mbps SFP Slot
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
10Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 3kV
ESD Protection: 6kV
Redundant Power Input Design - 12 ~ 48VDC
1 Relay Output to Port Break Alarm
IP30 Aluminum Cabinet
DIN-Rail and Wall Mount
Temperature range: -10 ° to 70 ° C

4 x 10/100 / 1000Mbit, PoE + (30W) IEEE 802.3at
1 x 10/100 / 1000Mbit
2 x 100 / 1000Mbit SFP slot
14Gbps Back Plane
8K MAC Address Table
10.0 Kbytes Jumbo Frame
Overvoltage 2kV DC
ESD Protection 6kV DC
Redundant Power Input Design: 48 - 55VDC
1 Relay Output for Power Error Alarm
IP30 Rugged Metal Cabinet
DIN-Rail and Wall Mount including
Operating temperature: -10 - + 70 ° C

& nbsp; Antenna to GSM, GPS, FM, AM
5MHz Bandwidth
Screw Mounting
4m Cable
Temperature: -40 ℃ ~ + 85 ℃
Full IP67 Waterproof

RJ45 dust cap - blanking
Put into unused RJ45 port Kirke protection
flexible and fits all RJ45 ports.
Sold individually

4 Port SATA PCIE Cards for each port up to 500MB / S to 4 individual ports (no raid)
Processor. Marvell 88SE9215
SATA up to 6.0 GB / S
Non-Raid

Waterproof Outdoor PoE+ Injector 30Watt
1 x RJ45 Data
1 x RJ45 Data and PoE+
1 x 2-pin DC Phoenix connectors
IK10 Vandal safe
Supply voltage: 24 - 56VDC
POE Standard: IEEE 802.3 at / af
End-Span
Pin: (+ 1.2) (- 3.6)
Operating temperature: -40 - +75°C
wall mounting
Size: 170 x 73 x 44 mm
Weight: 340g

Unmanaged 8 ports switch
Store-and-forward arkitektur
-40 °C - +75 °C driftstemperatur
8 x 10/100 Mbps speed auto negotiation
+10 ~ +30 VDC power input
DIN-Rail Mounting

Directional antenna - yagi type
9 dBi outdoor logperiodisk
20 cm coaxial cable with N-type he
two bands 800-960 / 1700-2500MHz
Mast bracket with angle adjustment included

External COM port via Ethernet and Internet.

1-port RS-232 serial device servers

External COM port via Ethernet and Internet

Nport RS232 serielportserver 12-48VDC with extended temperature.