Subcategories
48V DC ATX with 12V connector for P4, 2U
These power supplies can be used where the ordinary mains voltage (230 VAC) is not available - eg. in cars or on ships.
There can be supplied three types with +12 V, +24 V or -48 VDC input.
is equipped with EMI filter.
2.4GHz indoor omnidirectional antenna 0 dBi
Antenna for short range applications
1.5 meter cable, RSMA male connector
Robust, suitable for industrial machine
Gasket included - provides a watertight assembly
2.4GHz indoor omnidirectional antenna 0 dBi
Antenna for short-range applications
RSMA male connector for AP - (circumferential + hole)
Robust, suitable for industrial machine
Wireless Temperature Logger with memory
Med Bluetooth. T&D THermo APP
Sending measurement data to Data Collector (Base Station) at 870MHz
Distance between Data Logger and Data collector up to 150 meters
Battery operation up to 10 months at an upload per day
16,000 measurements in memory with the date and time stamp
Accuracy of measurement: 0.05mA + 3% at a measuring range from 10 to 40 ° C
Removable external terminal block. Close O-ring
Free Cloud service: TD WebStorage for Data Collector
LCD display shows current measurements
PC software: tools and presentation included
Data Logger setup with Data Collector Optical
Dimensions: 62 x 47 x 19 mm
Battery type: LS14250 x 1
Wireless Pulse Logger with memory
Max. number of pulses per measurement interval: 61439 pulses
Max. Frequency: 3.5kHz (0.3ms)
Sending measurement data to Data Collector (Base Station) at 870MHz
Distance between Data Logger and Data collector up to 150 meters
Battery operation up to 10 months at an upload per day
Data Logger is not on-line
16,000 measurements in memory with the date and time stamp
Removable external terminal block. Close O-ring
Free Cloud service: TD WebStorage for Data Collector
LCD display shows current measurements
PC software: tools and presentation included
Dimensions: 62 x 47 x 19 mm
Fixed antenna: 24 mm
Battery type: LS14250 x 1
Wireless Temperature Logger with memory Kirke Pt1000 and Pt100 3-wire
Bluetooth T&D APP
temperature: -199 - + 600 ° C, +/- 0.3 ° C + 0.3%
Sending measurement data to the data collector (Base Station) at 870MHz
Distance between Data Logger and Data collector up to 150 meters
Battery operation up to 10 months at an upload per day
Data Logger is not on-line
16,000 readings in memory with date and time stamp
Removable external terminal block. Close O-ring
Free Cloud service: TD WebStorage for Data Collector
LCD display shows current measurements
PC software: tools and presentation included
Data Logger setup with Data Collector Optical
Dimensions: 62 x 47 x 19 mm
Battery type: LS14250 x 1
1 channel detection of fluid leakage with MODBUS
Shutter local alarm of detection of water leakage
Acoustic alarm - adjustable
RS485 2-wire MODBUS RTU
2 x LED indicators for power and alarm
Relay output for alarm for water leakage - 30VDC / 2A
Monitor cable for liquid detector
Sensor cable can be up to 500 meters
Sensitivity is adjustable
Supports DCON and Modbus RTU protocols
Embedded Dual Watchdog
Operating temperature: -25 to + 75 ° C
Small form factor with DIN bracket
Dimensions: 83 x 70 x 29 mm
Operating voltage: 10 - 30VDC
Compact open board with 1 relay output
250VAC / 30VDC / 10A resistive load only
Controlled from USB via HID (E.g. )
Supply voltage: 5VDC via USB
No cabinet
Please note no software is included
Get info on USB-RELAY-HID software online.
1 channel software-selectable RS-232/485/422 port
Baud rate: 1200 - 230,400 / RS485 921,600
1 x 10/100 Mbps RJ45 Fast Ethernet port
Supports TCP Server/Client, UDP, Virtual COM and Tunneling modes
Modbus TCP/RTU/ASCII
Configuration via the web server side, the Telnet console and the Windows Utility
Upgradable firmware via Ethernet from a remote PC
Robust metal cladding; industrial EMC protection
Redundant dual DC inputs for non-stop operation
Optional DIN rail mounting
Supply: 9 - 30VDC or 5VDC / 9W
Dimensions: 78 x 65 x 28 mm
Temp: -40 - +70°C
Wireless Temperature Logger with memory
Bluetooth APP - T&D Thermo
Sending measurement data to Data Collector (Base Station) at 870MHz
Distance between Data Logger and Data collector up to 150 meters
Battery operation up to 10 months at an upload per day
Data Logger is not on-line
16,000 readings in memory with date and time stamp
Accuracy: +/- 0.5°C
Free Cloud service: TD WebStorage for Data collector
LCD display shows current measurements
PC software : tools and presentation included
Data Logger setup with Data collector Optical
Dimensions: 62 x 47 x 19 mm
Fixed antenna: 24 mm
Battery type: LS14250 x 1
Wireless Temperature and Humidity Logger with memory
Bluetooth to T&D Thermo APP
Sending measurement data to Data Collector (Base Station) at 870MHz
Distance between Data Logger and Data collector up to 150 meters
Battery operation up to 10 months at an upload per day
2 x 8,000 measurements in memory with the date and time stamp
Accuracy of measurement: max. + / - 0.3 ° C, +/- 5% RH
Removable external sensor. IP64 with O-ring
Free Cloud service: TD WebStorage for Data Collector
LCD display shows current measurements
PC software: tools and presentation included
Data Logger setup with Data Collector Optical
Dimensions: 62 x 47 x 19 mm
Battery type: LS14250 x 1
1 channel transmitter to receiver with relay outputs 868MHz
1 Contact
Momentary or Pulse
Safe Communication Protocol
IP66
Supply voltage: 3 x AAA batteries
Temperature range: -10 - + 50 ° C
Measure: 176 x 68 x 25 mm
1 fase energimåler/logger med Windows software
1 meter DIN skinne model TS-35, med en højde på 7,5mm
PCI Express parallel card with 1. DB25 port
Most drivers up to Win10 available in the Download
Clearance
serialport: RS232, RS422 or RS485
speeds from 1200 to 115 Kbps
1 Ports LTE Serial for Ethernet Gateway / Modem, RS232 / 422/485
GSM / GPRS / EDGE / UMTS / HSPA / LTE
Supports VPN and virtual computing
operating temperature 0- 55 ° C
IP30
12-48 VDC
DIN mounting (fittings included)
1 port LTE serial to Ethernet gateway / modem, RS232 / 422/485
GSM / GPRS / EDGE / UMTS / HSPA / LTE
Supports VPN and virtual comport
Operating temperature -30 -70 ° C
IP30
Supplied via the 12-48 VDC
DIN rail mounting (bracket supplied)
MODBUS
Serial Device Server
1 x RS232 / 422/485 port
Atop MB5001C
WIN XP / 7/8 / WIN 10
Web Server Config.
9 ~ 30 VDC
Event and schedule controlled switching 230VAC/10A
Accurate current measurement
Input for 2 sensors - temp/humidity, pressure
RJ45 to Ethernet
NTP function
Power port on/off via HTTP(S), SNMP, ModbusTCP, Telnet, SSH, MQTT
1-channel watchdog
Power port assigned to Watchdog (ICMP/TCP), auto reboot starts
Power consumption measurement (kwH) with 2 energy counters: one counter counts consistently, the other counter can be reset
Measurement of current (A), voltage (V), active power (W), apparent power (VA) and reactive power (VAr)
Measurement of differential current type A (mA)
Dimensions: 120 x 65 x 53 mm
IEEE 802.3AT / by POE standard compatible
Compatible with all IEEE 802.3AT / by PoE units
56VDC 50pwatt POE power
divides 56V DC power over RJ-45 to 12VDC or 19VDC or 24VDC
External power supply up to 100 meters
1 port RS422 or RS485 serial port with PoE via Ethernet and Internet
surge protection up to 2500 V
External COM port and DI / DO via Ethernet and Internet
built-in web server
3 x Shift relays Expanses Max. 30 VDC 1A
3 x digital contact inputs
1 x RS232 (DB9 Male), RS422 or RS485 (screw terminal)
1 x Ethernet 10 / 100Mbit
Power supply from 9 to 24 VDC
External COM port over network connection
serial port via db9 male
2 x RJ45 network connections
External COM port via Ethernet and Internet.
1-port RS-232 serial device servers
External COM port via Ethernet and Internet
RS232 Serialport via DB9 male
Power supplied from PoE
can be powered from 12 - 48VDC / 1.7 watts
Short Power Jack Pigtail Cable included
Purchase Power supply, not included
1 x RJ45 with PoE input
DIN mount
Operating temperature: -25 - + 75 ° C
Dim: 90 x 52 x 27 mm
1-port RS422/485 serial device server, MOXA NPort 5110A
Only 1 W power consumption
Speedy 3-step web-based configuration
Surge protection for serial, Ethernet, and power lines
COM port grouping and UDP multicast applications
Screw connectors for secure installation
Real COM/TTY drivers for Windows and Linux
Standard TCP/IP interface and versatile TCP and UDP operation modes
Connect up to 8 TCP hosts
External COM port via Ethernet and Internet - for fiber cable
SerialportServer 1 x RS232 / 422/485
Fiber is 100Mbit SFP (Single Mode or Multi Mode)
External COM port via Ethernet and Internet - for fiber cable network switch
Device server with single mode fiber and RS232 / 422/485 port
External COM port via Ethernet and Intenet - for fiber cable
Device server with multimode fiber and RS232 / 422/485 port
External COM port via Ethernet and Internet
RS422 / 485 Serial port via screw terminal
Power supplied from POE or 12 - 48VDC
Your mounting
External COM port over Ethernet and Internet
RS232/422/485
Atop SE5201-DB Serial Device Server
10/100Mbit Ethernet.
Serial port via DB9 male connector
Supports TCP Server/Client, UDP, Virtual COM and Tunneling modes
Power is supplied from 9 - 30VDC or 5VDC (power jack)
Power supply not included
DIN kit (option)
Dimensions: 65 x 78 x 28mm (without wall bracket)
Dimensions: 88.5 x 84 x 27.8mm (with wall bracket and DB9 port)
Serial Device Server for RS232 / RS422 / RS485 with WiFi
Device server til multimode fiber med RS232/422/485 serieport
Serial Device Server. Limited number
DIN rail mounting. Atop SW5001-WGN1-Single
1 x USB-A 2.0 Female
1 x RJ45 10/1000 Ethernet
Extension USB cable over 5 meters
Connect up to 4 USB devices with USB HUB (not supplied)
Power supply: 12VDC, 1A, Terminal Type (included)
Power consumption: 500mA
Operating Temperature: 0 To 55 ° C
Operating humidity: 5% Two 95% RH
Support: Windows XP to 10, Windows Server 2003 to 2016
Certifications: CE, FCC
Icron USB extension
With Local extender and the remote extender
Up to 100 meters over UTP / STP.
USB 1.1 up to 12Mbps
USB 2.0 up to 480Mbps
Cat 5e / 6 / 7
5VDC / 3A PSU inck. the remote unit
Supports up to 11 x USB units from 3 USB Hubs
Plug and play, no driver needed
OS Support: Windows, MacOS ™, Linux®, and Chrome OS ™
Icron USB Extension - with LOCAL and remote unit
Up to 100 meters over UTP / STP Cat 5e / 6/7
USB version: USB 1.1 and 2.0
24VDC / 1A PSU incl. the remote unit
Support up to 11 USB devices from three USB Hubs
Seriel kort til universal PCI, høj bagplade
External COM port via Ethernet and Internet
Can also provide Pair connection (back-to-back)
Small size for easy installation
Genuine COM / TTY drivers for Windows and Linux
Standard TCP/IP interface and versatile operating modes
Easy-to-use Windows multi-device server configuration tool
Built-in 15 KV ESD protection for all serial signals
SNMP MIB-II for network management
Configure via Telnet or web browser
Power supply included
External COM ports via Ethernet and Internet
3-in-1 Serial Port: RS-232, RS-422, OR RS-485
Modes: TCP Server, TCP Client, UDP
Ethernet Modem
Pair Connection
Real Com / Tty Drivers for Windows and Linux
2-wire RS-485 with Patented Automatic Data Direction Control (Addc®)
Built-in 15 kV ESD Protection for All Serial Signal
Serial device server with RS232 / RS485
RS232 via DB9
RS485 via screw terminal - 2-wire
External COM port via Ethernet and Internet
Nport RS232 serielportserver 12-48VDC with extended temperature.
1 stk. udendørs LED panel 48x48 pixels modul
6th / 7th Gen Intel® skylake-s / kaby lake-s i7 / i3 CPU
Intel® Q170 Express chipset
2 x DDR4 Sodimol socket, max. 64GB
Multiple Independent Display: DP, HDMI DVI
2 x Intel GBE LAN
4 x USB 3.0
4 x COM
2 x PCIE X 8 (Option: 1xPCI, 1xPCIex)
2 x Mini PCIE
1 x M.2
2 x SIM
1u Rackmount Server Design
1 A/D indgang til vejecelle,
1 D/A udgang
4 digitale udgange
RS485 Module for measuring voltage and power
is with 15VDC transmitter output for power loop
1 x analog input 0-20MA, 0 - +/- 10V
1 x digital input. High is closed Contact
2 x Digital output (Open Collector) + 50VDC / 30mA
Supply voltage: 10 - 30VDC
Dim: 123 x 72 x 35 mm
Power or Voltage Output
0 - +10VDC, 0 - 20mA, 4 - 20mA
Resolution: 12-bit
Software Selectable Power or Voltage Output
Output Cable Detector for Power Output (4 - 20mA)
Backlink Voltage or Current
Configurable Power-on Value
Configurable Safe Value
3000 VDC Intra Module Isolation
Programmable Output Slope
Dual Watchdog
Temperature Range: -25 to +75°C
Pneumatisk pullert uden styring til vejspærring/ tyverisikring.
Til udendørs brug
Rustfrit stål
90 cm høj, diameter: 16,8cm
103 Kg
LED indikering
Tyverisikret
OBS: kræver styring
1 shift relay output (NO / NC), relay contact: 24V / 0.5A
1x on / off output, (PTR multiconnector)
Power supply 12VDC / 500mA included
1 x RJ45 Ethernet
APP for Android & amp; iPhone
SNMP Get / Traps (SNMPv1, SNMPv2c)
Syslog and Email support
Serial card for universal PCI, low backplane Universal PCI 3.3 / 5.0V
1x RS232
UART 16550 (16 Byte FIFO)
Speed 921 kbps
PCI Plug and Play
Drivers for Windows 95 for Win 7 / 2008 R2
Software compatible with DOS, Windows 3.11, OS/2, Linux and various. Unix
RS485 Module for temperature sensors
1 x input for 2-, 3- or 4-wire PT100,Pt1000 sensor
Nickel Temperature sensor
Supply voltage: 10 - 30vdc
Get a RS485 or RS422 or RS232 port on the PC via the USB port
Galvanic isolation (optical) 2KV
DB9 male and screw terminal to 232/422/485 connection
Termination by Jumpers
Baud rate 300bit / s two 921.6 kbit / s
selectable RS232, RS422 and RS485 via DIP switch
Supports Win7 / 8/10 and over as well as MAC
Powered through USB (5V)
Operating Temp . 0 ° to 55 ° C,
1-wire barometrisk trykmåler, 2 x RJ11 til daisy chain
Relativ præcision på 0.12hPa
Høj elektromagnetisk (EMC) immunitet
Høj linearitet og nøjagtighed
Nem installation
Eksellent langtids stabilitet
Hver enhed har egen unik 64 bit serienummer
1-wire Current Loop Transmitter - 2 x RJ11 til daisy chain
Stor nøjagtighed - 10 bit opløsning
0-20mA og 4-20mA, 0,01mA opløsning (+/-2%)
Galvanisk isolation
IP30 tæt
Eksellent langtids stabilitet
Hver enhed har et unik 64 bit serienumber
Ivyko klaida
1-wire Temperature / Humidity sensor
Temperature -20 - +60°C
Humidity 10 - 90% RH
Temp tolerance +/-0.4°C at -10 - +60°C
Moisture tolerance ±3.0%rH at 20 - 80%rH
Long term operation ±0.25%/year at 20 to 80%rH
Long-term operation ±0.05°C/year at -10 to +60°C
Solution 0.1 %rH 0.1 °C
Power supply/consumption 4.0 to 5.5 VDC 5 mA
Dimensions 62 x 28 x 16 mm
Cable length 1 m
1-Wire temperature / humidity sensor
3 wires. +3.3 - 5.5VDC, Gnd, Data (yellow)
Temperature: -40 - + 80°C
Humidity: 0 - 99%RH
Temp: +/-0.5°C
Humidity: +/-3%RH
Repeatability: ±1%RH, ±0.2℃
1-wire combi sensor for temperature and humidity
3 connections: +5VDC, Gnd, data
Max. length of cable to controller: 180 metres
Mounting bracket for wall
Mounting bracket for penetration
Temperature range: -40 - +80°C
Accuracy: ± 0.4°C (0°C to 80°C)
Humidity range: 0 - 100% RH
Not suitable for environments with repeated or prolonged condensation
Accuracy: ± 2%
Sensor type: Digital 1-wire (Maxim DS18B20)
Cable length: 3 meters
Probe length: 100 mm
Probe diameter: 17.5 mm
1-wire communications - several sensors can be connected to the same unit
± 3.0% relative humidity accuracy
± 0.4% relative temperature accuracy
12 bit resolution for humidity measurement
14 bit resolution for temperature measurement
Calibrated digital output
Eksellent long-term stability
Each sensor has its own unique 64-bit serial number
1-wire communication - 2 x RJ11 connectors for daisy chain coupling.
± 3.0% relative humidity accuracy.
12 bit resolution for the moisture measurement.
14 bit resolution for temperature measurement.
calibrated digital output.
Eksellent long term stability.
Each sensor has its own unique 64-bit serial number.
Temperature sensor with Dallas chip - up to 8 pieces on the same bus
1-wire communication to the measuring electronics
With connector for cascade coupling to the next sensor
±0.5°C accuracy from -40°C to +85°C
12 bit resolution
Temperature sensor in the box
Very low power consumption
Each device has a unique 64 bit serial number
Temperature sensor with Dallas chip - up to 8 pieces on the same bus
1-wire communication to the measuring electronics
± 0.5 ° C accuracy from -10 ° C to + 85 ° C
12 bit resolution
Aluminum head provides low thermal resistance
IP65 close
Very low power consumption
Each unit has a unique 64 bit serial number
1-wire kommunikation - 2 x RJ11 stik til daisy chain kobling
2 - 3 - 4 tråds Pt100 temperaturføler - 4-tråds anbefales.
Indbygget A/D konverter med kompensering
24 bit opløsning for temperatur måling
Kalibreret digital output
Eksellent langtids stabilitet
Hver føler har eget unik 64 bit serienummer
Bidirectional SFP module
Single Fiber LC
3KM
TX 1310nm
RX 1550nm
Bidirectional SFP module
Single Fiber LC
3KM
RX 1310nm
TX 1550nm
The data rate of 1.25Gbps to fiber cables
1310nm DFB laser and PIN photodetector for 40km transmission
compatible with SFP MSA and SFF-8472 with duplex LC receptacle
Compatible with SONET OC-24 LR 1 and RoHS
Switch to switch inte race
Router / server interface
+ 3.3V single power supply
Operating temperature: 0 to + 70 ° C
product consists of two SFP modules
Dual data-rate of 1.25Gbps / 1.063Gbps
1310nm FP laser and PIN photodetector for 10km transmission
Compatible with SFP MSA and SFF-8472 with duplex LC receptacle
Compatible with SONET OC-24 LR-1
Switch to switch interface
Router / server interface
+ 3.3V single power supply
Operating temperature: 0 to +70°C
Ahd (analog high definition) camera
water and dusty bullet camera
IR light
AHD is not a CCTV composite camera
must be connected AHD Digital Video Recorder
1.3 mega pixel Ahd (analog high definition)
water and dusty bullet cameras
IR light
is not a CCTV, composite camera
must be connected to an AHD Digital Video Recorder
Mini Dp to DVI
1.8M
No audio transfer
HDMI to mini display port adapter
Full HD 1080P, The Thunderbolt to DVI cable supports a resolution of up to 1920 x 1200/1080P (Full HD)
Goldplated connector
Wide compatibility:
The DVI to Thunderbolt 2 converter cable is compatible with
Microsoft Surface Pro 6, Pro 5, Pro 4, Pro 3
SurfaceBook (not Surface for Windows RT)
MacBook Pro, MacBook Air, Mac mini, Mac Pro
ThinkPad X1 Carbon
And others with Mini DisplayPort or Thunderbolt 2 port.
USB kabel med USB-A han og USB-A hun stik
AWG28
USB3.0
Guldbelagte stik
Sort
LED timer display med 6 cifre hvor lysstyrken kan justeres via fjernbetjening
Fanless Design
Intel® Atom ™ Processor E3845, 1.92GHz
Up to 2x 2GB DDR3L-1333 SO-DIMM
M12 plug
1 x USB 2.0, 1 x USB 3.0
1x DVI-D, 1x VGA
2x RS232, 1x RS422 / RS485
EN50155 certified
Optional: Power supply from DC 9v ~ 36V Option: (72V / 110V DC)
Approved for installation on the railway .
10 "Panel PC with Touchscreen
Optional: Capacitive Touchscreen
Intel Baytrail-D J900
4 x USB (1 x USB 3,0 on front panel, 3 x USB 2,0 internal)
3 x RS232 + 2 x RS485
OS: Windows 7,8,10, Linux
2 x Intel Gigabit RJ45 LAN
Supply 9-28V DC
64 GB / 1 x mSATAIII
Omni antenna
360 degree horizontal signal
6 degree vertical signal
N-type female
outdoor use
high Operating temperature -40 ~ 70 ° C
for wall and pipe assembly
35 (diameter) x 420 mm
including bracket
Rest storage
2 Ports Repeater to 10 Base2 and 10 Base5 Network
BNC / Aui Ethernet
can convert between Aui and BNC networks.
Dust cap/ Rubber plug/ blanking plug for USB type A female connector.
Easy to use
10 pcs
Dimensions: (W x H x D) 12.5 x 6 x 7mm
Shielded RJ45 plug in bags of 10
8 x 10 / 100Mb RJ-45 ports not Managed switch
2 x Gigabit SC uplink ports
Broadcast storm protection
IEEE802.3x Full Duplex, back pressure flow control for Redundant dual DC power inputs
Robust Cabinet
Relay Output Enables Relay
Supports Up to 8K MAC Addresses
8 x RJ45 PoE + 36W Gigabit
2 x SFP 100/1000 Mbit
10K Jumb frames
2M Packet Buffer
16K MAC address table
-40 to + 75 ° C
Managed Gigabit switch til rack montering
8 x RJ45 port 10/100/1000
2 x 100/1000X SFP module
RS-232 DB9 interface for management og setup
110-230VAC indbygget
8 x 10/100/1000Mbit - RJ45 med auto MDI/MDI-X
2 x SFP slot 100/1000Mbit fiber port
IP30 metalkabinet
DIN rail og vægmontering
Redundant Power input
12 til 48VDC, redundant, med polaritetsbeskyttelse
AC input 24VAC power input er mulig
6000VDC Ethernet ESD beskyttelse
Udvidet temperatur -40 til 75°C
IEEE 802.3az
10 ports 10/100/1000Mbps Fast Ethernet switch + 2 100/1000Mbps SFP slot
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -10° til 70°C
10 port 10/100/1000Mbps switch og 2 port 10Gbps SFP+ fiber slots
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
16K MAC Address Table
9,216 bytes Jumbo Frame Support
Surge Protection: 2,000 VDC Support
ESD Protection: 6,000 VDC Support
Redundant Power Input Design: 12~48VDC
1 relæ output til Power Failure Warning
IP30 Rugged Metal Case Design
DIN-Rail and Wall Mount Support
Temperaturområde: -40° to 60° C
Distributed I/O via Ethernet/RS485
Can be controlled via RS485 or Ethernet
10 x digital in 10 x relay out (mechanical relay)
9VDC ~ 24VDC supply voltage (power adapter included)
16bit / 100MHz CPU
256 KB ROM, 1 MB SDRAM
10" Industrial Panel PC
OS: Android 10
Rockchip RK3288 Cortex®-A17 Quad-core 1.8GHz processor
Resolution: 1280 x 800 (16:10)
Viewing angle: 170°/170°
Light sensor (automatic dimming)
10.1" IPS screen with 1000 nits brightness and capacitive touch
1 x RJ45 Gigabit Ethernet
4 x GPIO (2 inputs, 2 outputs)
3 x RS232 (via DB9 octopus cable)
1 x HDMI output
2 x USB-A host
1 x USB-C OTG
3.5mm audio output
Memory: 2GB LPDDR3 + 16GB eMMC, Option: 4GB + 64GB
Supply voltage: 9~36VDC (mains adapter not included)
Operating temperature: -10° ~ +60°C
Dimensions: 249 × 166 × 32mm
Weight: 980g
8 x 10/100 / 1000Tx RJ45 for PoE + (30W / port) IEEE 802.3at PoE for 2 x 100/1000 SFP ports for Auto MDI / MDI-X Function
Store -and-Forward Switching Architecture
20Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
UL Class I, Division 2 Certified
Supply Voltage: 48 ~ 55VDC
Built-in Relay Output for Power Failure for IP30 Rugged Metal Case Design for DIN Rail and Wall Mounting at Operating Temperature STD: -10 ° to 70 DEG C
8 x 10/100 / 1000Tx RJ45 for PoE + (30W / port) IEEE 802.3at for 2 x 100/1000 SFP ports for Auto MDI / MDI-X Function for Store-and- Forward Switching Architecture
20Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC for UL Class I , Division 2 Certified
Supply Voltage: 48 ~ 55VDC
Built-in Relay Output for Power Failure for IP30 Rugged Metal Case Design for DIN Rail and Wall Mounting - Operating Temperature: -40 ° to 75 ° C
8 x 10/100 / 1000Tx RJ45 IEEE 802.3at PoE + 2 x 100/1000 SFP Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
20Gbps Back -Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
UL Class I, Division 2 Certified
Power Supply : 48 ~ 55VDC
Built-in relay Output for Power Failure
IP30 Rugged Metal Case Design
DIN-Rail and Wall mounting
Operating temperature STD: -10 ° to 70 ° C
Supporter 8-Port 10 / 100Tx
2 Gigabit Combo Ports
6 x RJ45 Port 10 / 100Tx
2 x 10/100/100 RJ45
2 x 100/1000 SFP Slots
Supporter Auto MDI / MDI-X
Non-Blocking Switching Fabric
8K MAC Address
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
UL Class I, Division 2 Certified
Redundant Power Input Design: 12 ~ 48VDC
1 x built-in relay Output for Power Failure warning
IP30 Rugged Metal Case Design
DIN rail and wall mounting
Operating temperature STD: -10 ° to 70 ° C
Supporter 8-Port 10 / 100Tx
2 Gigabit Combo Ports
6 x RJ45 Port 10 / 100Tx
2 x 10/100/100 RJ45
2 x 100/1000 SFP Slots
Supporter Auto MDI / MDI-X
Non-Blocking Switching Fabric
8K MAC Address
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
UL Class I, Division 2 Certified
Redundant Power Input Design: 12 ~ 48VDC
1 x Built-in Relay Output for Power Failure Warning
IP30 Rugged Metal Case Design
DIN Rail and Wall Mounting
Operating Temperature EOT: -40 ° to 75 ° C
Managed switch. 8 x SFP, 2 x RJ45 ports
8 x fiber ports - 100/1000Base-SX / LX mini-GBIC SFP slots
2 x copper ports - 10/100/1000Mbit RJ45
IP30 enclosure
DIN rail and wall mounting
24:02 48V DC, redundant power
Can accept 24VAC
-40 to +75°C operating temperature
Dimensions: 152 x 107 x 72 mm
Managed Gigabit switch. 8 x RJ45, 2 x SFP
8 x 10/100/1000Mbit with RJ45 connectors
2 x 100/1000Mbit to SFP
Supply voltage: 12 - 48VDC redundant
Also accepts 24VAC
Power consumption : max. 10W
DIN rail bracket
1 relay for alerting
Dimensions: 135 x 88 x 56 mm
Operating temperature: -40 - +75°C
10.1" Mobile tablet - Windows
1280 x 800 (16:10)
700 nits
CPU Celeron N5100 Quad Core
Support Windows 11
RAM LPDDR4 8GB
SSD 128GB
1 x USB 3.0, USB-C
OPTIONS: 4G, LTE, GPS
Bluetooth 5.0
Support Anti-Scratch Touch Panel
Built-in 13.56MHz RFID, NFC
OPTION: Support 1D / 2D Barcode scanner
Front camera 5.0MP / Rear camera 8.0MP
Fingerprint reader (option)
IP65
Up to 6 hours on a charge, * 6 hours (standard 50% volume, standard 200nit, play 1080HD video)
